Abstract:Photovoltaic (PV) module soiling, i.e., the accumulation of dust on PV module surfaces, poses several challenges to PV system performance. Among these challenges, the nonuniform deposition of soiling across the module surface has received scarce attention. Soiling is directly associated with an overall performance loss, but can also potentially give rise to localised hotspots that can lead to long-term PV module failure. Therefore, addressing the issues arising from this nonuniformity is not only important for optimising energy production, but also for enhancing system reliability, and ensuring the long-term operation of relevant power generation systems. In this study, the impact of nonuniform soiling on PV performance is investigated experimentally by examining soil deposition on the upper surfaces of low-iron glass samples. Samples positioned at four different tilt angles were collected on a monthly basis over a one-year study period. Since the horizontal samples were found to represent the worst-case conditions, the most soiled sample at horizontal tilt was divided into four zones, each housing a single monocrystalline solar cell and examined further. The findings reveal that the soiled sample experiences an average transmittance deterioration of 13% relative to a clean sample, and a maximum (relative) spatial variation of 4% between the four zones. These optical losses affect the amount of sunlight received by the cells, resulting in a power deterioration of ∼6–7% per 5% drop in transmittance. The soiled sample experienced an average temperature rise of 2 °C, and an average power output (and efficiency) reduction of 30% relative to the clean sample, and a maximum (relative) spatial variation of 7% between the zones. The 30% average power loss measured in this nonuniform soiling case is more than double that which would be expected theoretically for a transmittance loss of 13% but from uniform soiling, so these results highlight the importance of addressing PV soiling for optimal PV performance, and of accounting for spatial soiling nonuniformity.

Soiling of photovoltaic panels in the Gulf Cooperation Council countries and mitigation strategies

Anti-Soiling Coatings for Enhancement of PV Panel Performance in Desert Environment: A Critical Review and Market Overview

A Comprehensive Review of a Decade of Field PV Soiling Assessment in QEERI’s Outdoor Test Facility in Qatar: Learned Lessons and Recommendations

Recent progress of soiling impact on solar panels and its mitigation strategies: A review

Review of Strategies to Mitigate Dust Deposition on Solar Photovoltaic Systems

Soiling impact and cleaning techniques for optimizing photovoltaic and concentrated solar power power production: A state-of-the-art review

In-situ soiling evaluation and cleaning schedules optimization for several PV technologies under desert climate

Solar photovoltaic panel soiling accumulation and removal methods: A review

Soiling Losses: A Barrier for India’s Energy Security Dependency from Photovoltaic Power

Photovoltaic Modules' Cleaning Method Selection for the MENA Region

Assessing Environmental Dynamics and Angular Influence on PV Soiling: Employing ANFIS to Mitigate Power Losses

Performance analysis of innovative cleaning and soiling mitigation solutions in the semi-arid climate of Benguerir Morocco

Energy yield loss caused by dust deposition on photovoltaic panels

Evaluation of Dust Elements on Photovoltaic Module Performance: an Experimental Study

soiling accumulation on the module may affect output power of PV Module by decreasing of quantity of solar irradiation falling

Assessing the Features of PV System's Data and the Soiling Effects on PV System's Performance Based on the Field Data

Experimental investigation of nonuniform PV soiling

Effect of dust accumulation on the power outputs of solar photovoltaic modules

Structural and physical properties of the dust particles in Qatar and their influence on the PV panel performance

Power loss due to soiling on solar panel: A review

Experimental investigation of a nano coating efficiency for dust mitigation on photovoltaic panels in harsh climatic conditions