Abstract:Aqueous zinc (Zn)-ion batteries (AZIBs) have been paid attention to as safe, economical, and high-energy-density storages through multiple electron transfer. Although conventional alkaline solution-based AZIBs are primary batteries, recent studies demonstrated the reversible Zn 2+ deposition and stripping processes enabled in mildly acidic solutions. It promises the development of rechargeable AZIBs and viable applications for energy storage systems (ESSs). However, metallic Zn employed as the negative electrode has suffered from severe corrosion and precipitation of electrolyte salts in this low pH condition. The Zn electrode undergoes a hydrogen evolution reaction (HER) as Zn 2+ is dissolved from the Zn surface. The corrosion leads to a pH rise, precipitating electrolyte salt as zinc hydroxide forms. For example, hexagonal plates of zinc hydroxide sulfate hydrate (Zn 4 SO 4 (OH) 6 ∙xH 2 O, indicated as ZHS) grew on the Zn electrode in 1 M ZnSO 4 solution when pH approached ~5.4. The insulating and randomly oriented ZHS increased the surface resistance and caused the non-uniform Zn deposition. These challenges are mitigated by adding organic acid to the 1 M ZnSO 4 solution. As the HER raised pH, the acid was promptly deprotonated, then coordinated with Zn 2+ . This process caused the thin film formation consisting of three-dimensional zinc glutarate. The zinc glutarate protected the Zn electrode and impeded the electrode corrosion and the ZHS precipitation. We demonstrated a uniform Zn plating and stripping process with 10 mM of organic acid in contrast with dendritic and dead Zn growth in the absence of the additive. Galvanostatic tests of symmetric Zn cells revealed over 1000 h cycles with the additives at a current density of 1 mA cm -2 and a limited capacity of 1 mAh cm -2 . In contrast, the Zn cells with the additive-free electrolyte solution exhibited 15 times lower cyclability as micron-scale ZHS plates covered the electrode surface. Our strategy using the cheap additives is feasible to use grid-scale ESSs and shows significantly improved cycling performances. I will present details of Zn surface reactions using organic acid additive and corresponding electrochemical performances in this presentation.

Achieving Uniform Deposition of Zn with Amide Additives for Metal Anodes Stabilization

Thioacetamide Additive Homogenizing Zn Deposition Revealed by In Situ Digital Holography for Advanced Zn Ion Batteries

Electrolyte Additive Strategies for Safe and High-Performance Aqueous Zinc-Ion Batteries: A Mini-Review

Regulating Zn-ion Solvation Structure and Zn(002) Deposition for Stable Zn Anode

Simultaneously Tailoring Zinc Deposition and Solvation Structure by Electrolyte Additive

Building Metal‐Molecule Interface towards Stable and Reversible Zn Metal Anodes for Aqueous Rechargeable Zinc Batteries

Highly Reversible and Stable Zn Metal Anodes Realized by Trifluoroacetamide Electrolyte Additive

Maltose Additive Enables Compacted Deposition of Zn Ions for Stabilizing the Zn Anode

Stabilizing Metallic Zn Electrode Using Organic Acid Additives in Aqueous Zinc-Ion Batteries

Integrated Interfacial Modulation Strategy: Trace Sodium Hydroxyethyl Sulfonate Additive for Extended-Life Zn Anode Based on Anion Adsorption and Electrostatic Shield

Mapping the design of electrolyte additive for stabilizing zinc anode in aqueous zinc ion batteries

Modulating Solvation Shell with Acrylamide Electrolyte Additives for Reversible Zn Anodes

Elucidating synergistic mechanisms of an anion–cation electrolyte additive for ultra-stable zinc metal anodes

Enabling High Reversibility of Zn anode via Interfacial Engineering Induced by Amino acid Electrolyte Additive

Guiding uniform Zn deposition with a multifunctional additive for highly utilized Zn anodes

Boosting the performance of aqueous zinc‐ion battery by regulating the electrolyte solvation structure

Stable zinc anode achieved through ultramicro long chain cationic surfactant as interface regulator in aqueous electrolyte

Rearrangement of H-bonds Network of Solvation Structure via a Zincophilic Polyol-type Surfactant to Stabilize Zinc Anode in Aqueous Zinc-ion Batteries

Solvation structure regulation of organic small molecules additive for dendrite-free aqueous zinc-ion batteries

Highly Reversible Zinc Metal Anode in a Dilute Aqueous Electrolyte Enabled by a pH Buffer Additive

Low-Cost Aqueous Electrolyte with MBA Additives for Uniform and Stable Zinc Deposition