Abstract:The earthquake and tsunami on March 11, 2011 severely damaged the Fukushima Dai-ichi nuclear plant leading to the most severe nuclear incident since Chernobyl. Ongoing operations to cool the damaged reactors at the site have led to the generation of highly radioactive coolant water. This is currently mainly treated to remove Cs-137 and Cs-134 and passed through a reverse osmosis (RO) unit to reduce the salinity before being cycled back to the reactors. Because only the Cs isotopes are removed, the RO reject water still contains many radioactive isotopes and this has led to the accumulation of over 200,000 cubic meters (52 million gallons) of extremely contaminated water which is currently stored on site in tanks. EnergySolutions, in partnership with Toshiba, were contracted to develop a system to reduce 62 isotopes in this waste down to allowable levels. This was a significant technical challenge given the high background salt content of the wastewater, the variation in aqueous chemistry of the radioactive isotopes and the presence of non-active competing ions (e.g. Ca and Mg) which inhibit the removal of isotopes such as Sr-89 and Sr-90. Extensive testing was performed to design a suitable system that could meet the required decontamination goals. more » These tests were performed over a 6 month period at facilities available in the nearby Fukushima Dai-ni laboratory using actual waste samples. This data was then utilized to design a Multi Radioactive Nuclides Removal System (MRRS) for Fukushima which is a modified version of EnergySolutions' proprietary Advanced Liquid Processing System (ALPS)'. The stored tank waste is fed into a preliminary precipitation system where iron flocculation is performed to remove a number of isotopes, including Sb-125, Ru-106, Mn-54 and Co-60. The supernatant is then fed into a second precipitation tank where the pH is adjusted and the bulk of the Mg, Ca and Sr precipitated out as carbonates and hydroxides. After passing through a cross-flow ultrafiltration membrane, the permeate then goes through a total of 14 fixed ion exchange and adsorbent columns followed by a disposable polishing column to polish the residual isotopes down to allowable levels. At the end of the system, the effluent is filtered for a final time to removal any particulates that may have been picked up from the media columns and then stored prior to analysis. (authors) « less

Radiation resistance and saturated adsorption capacity of a superabsorbent polymer and anion-supporting hydrogel for the safe storage of treated water

Molecular Modification of a Novel Macroporous Silica-Based Impregnated Polymeric Composite by Tri-N-butyl Phosphate and Its Application in the Adsorption for Some Metals Contained in a Typical Simulated HLLW.

Feasibility of Treatment Agents in Radioactive Iodine Separation from Waste Liquids

Basic study on tritium monitor using plastic scintillator for treated water discharge at Fukushima Daiichi Nuclear Power plant

Radioactive cesium removal from nuclear wastewater by novel inorganic and conjugate adsorbents

New Standards in Liquid Waste Treatment at Fukushima Dai-ichi - 13134

Immobilisation of iodide in alkali-activated materials

Removal Efficiency of Radioactive Cesium and Iodine Ions by a Flow-Type Apparatus Designed for Electrochemically Reduced Water Production

Efficient removal of radioactive iodide from contaminated seawater by radiation-resistant Ag+-doping polypropylene nonwoven adsorbents

Radiation-Induced Hydrogel for Water Treatment

Ultralight crystalline hybrid composite material for highly efficient sequestration of radioiodine

Advanced porous materials and emerging technologies for radionuclides removal from Fukushima radioactive water

Development of a practical tritiated water monitor to supervise the discharge of treated water from Fukushima Daiichi Nuclear Power Plant

Reusable fibrous adsorbent prepared via Co-radiation induced graft polymerization for iodine adsorption

(Tco4-)-Tc-99 Remediation By A Cationic Polymeric Network

Improving cesium removal to clean-up the contaminated water using modified conjugate material

Chemical species of iodine during sorption by activated carbon -Effects of original chemical species and fulvic acids

Synthesis and characterization of gamma radiation-induced (3-acrylamidopropyl) trimethylammonium chloride-acrylic acid functional superabsorbent hydrogel

Tetraethylene Glycol-Based Polymer Networks for the Efficient Removal of Radioactive Methyl Iodide and Iodine Vapor

Removal of radioactive iodine and cesium in water purification processes after an explosion at a nuclear power plant due to the Great East Japan Earthquake

Enhanced immobilization of Prussian blue through hydrogel formation by polymerization of acrylic acid for radioactive cesium adsorption