Abstract:The glassy polymer of polystyrene (PS) enjoys a good reputation as a promising optical material; however, the inherent brittleness hinders its further applications. Conventional toughening methods are realized based on the premise of a sacrifice in transparency and stiffness. In this work, we found an unprecedented strategy to address these obstacles by combining extensional stress-induced ductility and suppressing physical aging. PS-based film with a high stiffness, long-term ductility, and excellent transparency is achieved by introducing a styrene–butadiene block copolymer into the PS matrix and subsequently annealing stretched. A nanofibrillar structure of the polybutadiene (PB) phase is formulated surrounded by a PS matrix, and thus, the elongation at break enhances from 3.1% up to 86.8%, accompanying the yield strength enhanced from 25.5 to 62.2 MPa. More significantly, compared with neat PS, these films survive from physical aging and persistent ductility over time. The morphology deformation induced by stress makes an obvious contribution to the improvement of transparency. Investigating the dynamics of chain segments indicates that the incorporation of the copolymer can restrict rearrangement and local relaxation to the PS chain. This work could pave a potential route toward high-performance PS and might be transferable to other glassy polymers with a fragile character.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acsmacrolett.0c00733?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acsmacrolett.0c00733</a>.Materials, sample preparation, and protocol; the calculation procedure of the average length of PB nanofibrils (Lf) by SAXS profiles; 2D-SAXS pattern and Lf of the films; the TEM images of 30 wt %, 50 wt % blend, and neat KR01; the mechanical properties of the neat KR01 unstretched films; comparison of mechanical and optical properties between toughening methods from the recent reports and our work; the typical stress–strain curves of the neat PS and 15 wt % blend films after 1 and 106 days of storage at room temperature, respectively; the mechanical properties of neat PS films and 15 wt % blend films after 407 days of storage; detailed information on optical properties in neat KR01 films; the orientation factor (f) of samples with diverse KR01 content and draw ratios; the TMDSC profiles of samples with diverse draw ratios; the calculation procedure of mass fraction of mobile amorphous fraction (MAF) and the rigid amorphous fraction (RAF); the DMA curves of specimens with various draw ratios (<a class="ext-link" href="/doi/suppl/10.1021/acsmacrolett.0c00733/suppl_file/mz0c00733_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

Reinforcement of styrene‐acrylonitrile polymer bulk with glass nanofibers to introduce photoluminescent bricks

Glass nanofibers and lanthanide aluminate nanoparticles as reinforcement nanofillers for polyurethane composite toward smart applications

Preparation of luminescent polyethylene plastic composite nano‐reinforced with glass fibers

Photoluminescent polymer-based smart window reinforced with electrospun glass nanofibres

Preparation of photochromic and afterglow concrete from recycled polystyrene plastic waste immobilized with strontium aluminate nanoparticles

Preparation of smart glue using strontium aluminate and polylactic acid oligomer grafted Arabic gum

Immobilization of Strontium Aluminate into Recycled Polycarbonate Plastics towards an Afterglow and Photochromic Smart Window

Preparation of polypropylene nanofibers reinforced multifunctional epoxy composite concrete with ultraviolet‐driven afterglow emission

Immobilization of rare-earth doped aluminate nanoparticles encapsulated with silica into polylactic acid-based color-tunable smart plastic window

Preparation of cellulose nanowhiskers‐reinforced polyurethane: Photoresponsive plastic with ultraviolet protection and superhydrophobic properties

Preparation of photochromic lanthanide aluminate-immobilized polylactic acid nanofibers for optical authentication labeling

Electrospinning of biopolymer nanofibers encapsulated with functional nanoparticles toward core‐shell fluorescence encoding

Functional and ultrastretchable thermoplastic elastomeric materials: Influence of carbon dots on fluorescence, dielectric and mechanical properties

Preparation of photoluminescent and photochromic smart glass window using sol-gel technique and lanthanides-activated aluminate phosphor

Preparation and Properties of Transparent Bulk Polymer Nanocomposites with High Nanophase Contents

Durably Ductile, Transparent Polystyrene Based on Extensional Stress-Induced Rejuvenation Stabilized by Styrene–Butadiene Block Copolymer Nanofibrils

Valorizing hazardous lead glass sludge and alumina flakes filling waste for the synthesis of geopolymer building bricks

Simple Preparation of Photoluminescent and Color-Tunable Polyester Resin Blended with Alkaline-Earth-Activated Aluminate Nanoparticles

Preparation of transparent electrospun nanofibrous membrane from long‐persistent phosphor‐reinforced polymer for security authentication

Facile Fabrication of Upconversion Photoluminescent Transparent Semiaromatic Polyamide Nanocomposites Through Interfacial Chemistry Modification

Preparation and characterization of transparent advanced smart nanocomposites reinforced by nanofibrillated cellulose/poly(methyl methacrylate)/methyl methacrylate/benzoyl peroxide