All-Thermoplastic Sandwich Composites

Wenguang Ma,Russell Elkin

DOI: https://doi.org/10.1201/9781003035374-5

2021-11-01

Abstract:Although thermoplastic resin systems are not new, their use in composite and sandwich construction has seen dramatic growth in the 21st century. Sandwich composites that are made using the thermoplastic core materials with thermoplastic face sheets or fiber-reinforced thermoplastic skins, laminated by thermal bonding or welding process, are called all-thermoplastic sandwich composites (TSCs). Features of all-TSCs are high fracture toughness and impact resistance and short laminating time in a clean and healthy work environment, as well as the possibility to highly automate fabrication. Scraps and used finished goods can be re-formed, re-processed, repaired, or recycled all by the thermal melting process. Other features include long raw material shelf life to ensure the lower processing cost. Furthermore, it is possible to use a single polymer throughout the core and skins which brings on optimal face–core compatibility due to the absence of a separate adhesive layer. This chapter will introduce the concept and specialties of all-TSC firstly, discuss the features and benefits, and then present thermoplastic core, face sheet, and processing methods that include compression molding, continuous lamination, in-situ core foaming, diaphragm forming, and 3D one-step forming. Finally, the thermoforming, thermal welding, and other post-processing methods, and recycling by the melting/molding process are unveiled. This chapter introduces the concept and specialties of all- thermoplastic sandwich composites (TSCs), discusses the features and benefits, and presents thermoplastic core, face sheet, and processing methods that include compression molding, continuous lamination, in-situ core foaming, diaphragm forming, and 3D one-step forming. It unveils thermoforming, thermal welding, and other post-processing methods, and recycling by the melting/molding process. The sandwich composites that are made using thermoplastic foam, honeycomb or composite mat cores with the solid thermoplastics or fiber-reinforced thermoplastics skins, and by thermal bonding or welding process are called all-TSCs. Making all-TSC products by compression molding has two ways in the process: two-step nonisothermal compression mold molding process and one-step nonisothermal compression molding process. Thermoforming of initially assembled flat sandwich structures is another method of realizing 3D sandwich parts. Although it is an additional step, it can be an effective way to obtain complex sandwich structures.