Abstract:Lithium-sulfur (Li-S) batteries are regarded as one of the promising advanced energy storage systems due to their ultrahigh capacity and energy density. However, their practical applications are still hindered by the serious shuttle effect and sluggish reaction kinetics of soluble lithium polysulfides. Herein, g-C3N4 nanosheets and graphene decorated with an ultrafine Co-species nanodot heterostructure (Co@g-C3N4/G) as separator coatings were designed following a facile approach. Such an interlayer can not only enable effective polysulfide affinity through the physical barrier and chemical binding but also simultaneously have a catalytic effect on polysulfide conversion. Because of these superior merits, the Li-S cells assembled with Co@g-C3N4/G-PP separators matched with the S/KB composites (up to ~70 wt% sulfur in the final cathode) exhibit excellent rate capability and good cyclic stability. A high specific capacity of ~860 mAh g−1 at 2.0 C as well as a capacity-fading rate of only ~0.035% per cycle over 350 cycles at 0.5 C can be achieved. This bifunctional separator can even endow a Li-S cell at a low current density to exhibit excellent cycling capability, with a capacity retention rate of ~88.4% at 0.2 C over 250 cycles. Furthermore, a Li-S cell with a Co@g-C3N4/G-PP separator possesses a stable specific capacity of 785 mAh g−1 at 0.2 C after 150 cycles and a superior capacity retention rate of ~84.6% with a high sulfur loading of ~3.0 mg cm−2. This effective polysulfide-confined separator holds good promise for promoting the further development of high-energy-density Li-S batteries.

Separator modification by Mo x C/N-doped graphene enabling polysulfide catalytic conversion for high-performance Li-S batteries

Two-dimensional Molybdenum Nitride Nanosheets Modified Celgard Separator with Multifunction for LiS Batteries

Three-Dimensional Ordered Fevo4 Nanocatalyst-Modified Separator Enables Suppressed Polysulfides Shuttling and Boosted Redox Conversion in Li-S Batteries

Suppression Of Polysulfide Shuttling With A Separator Modified Using Spontaneously Polarized Bismuth Ferrite For High Performance Lithium-Sulfur Batteries

Tg-C 3 N 4 -coated functional separator as polysulfide barrier of high-performance lithium-sulfur batteries

Modified separators boost polysulfides adsorption-catalysis in lithium-sulfur batteries from Ni@Co hetero-nanocrystals into CNT-porous carbon dual frameworks

Constructing a Catalytic Reservoir Using Cobalt Nanoparticles-Mos2@nitrogen Doped Carbon Nanotubes on the Separator to Immobilize Polysulfides and Accelerate Their Conversion for Lithium-Sulfur Batteries

Separator modified by a caterpillar-like composite with interconnected N-doped carbon nanotubes decorated Co-MnO heterointerface enabling robust polysulfide adsorption and catalytic conversion for Li-S batteries

Ultrafine Co-Species Interspersed g-C3N4 Nanosheets and Graphene as an Efficient Polysulfide Barrier to Enable High Performance Li-S Batteries

Sulfide-based MOF material modification of separators: enhancing performance of lithium-sulfur batteries by suppressing shuttle effect

The Effective Design of a Polysulfide-Trapped Separator at the Molecular Level for High Energy Density Li-S Batteries

Separator Modified by Cobalt‐Embedded Carbon Nanosheets Enabling Chemisorption and Catalytic Effects of Polysulfides for High‐Energy‐Density Lithium‐Sulfur Batteries

A 3D MoS2/Graphene Microsphere Coated Separator for Excellent Performance Li-S Batteries

In-situ Constructing Hetero-Structured Mo2C-Mo2N Embedded in Carbon Nanosheet As an Efficient Separator Modifier for High-Performance Lithium-Sulfur Batteries

Mo2C-Loaded Porous Carbon Nanosheets as a Multifunctional Separator Coating for High-Performance Lithium–Sulfur Batteries

Electrochemically active separators with excellent catalytic ability toward high-performance Li–S batteries

A three-dimensional interconnected nitrogen-doped graphene-like porous carbon-modified separator for high-performance Li-S batteries

C@MoS2 modified separator as efficient trapper and catalysis for promoting polysulfide conversion in Li-S battery

Synergistic catalytic conversion and chemisorption of polysulfides from Fe/Fe 3 C/FeN 0.0324 nanocubes modified separator for advanced Li-S batteries

A Novel Pathway for Sustained Sulfides Conversion via Electrocatalyst-Modified Separator in Lithium-Sulfur Batteries

Construction of Co@N-CNTs grown on N-MoxC nanosheets for separator modification to enhance adsorption and catalytic conversion of polysulfides in Li-S batteries