Abstract:Conventional lead halide Perovskite Solar Cells (PSC) have toxicity and stability issues. Therefore it is crucial to look for lead-free inorganic perovskite material, such as La 2 NiMnO 6 , RbGeI 3 , CsGeI 3 , Cs 2 AgBiBr 6 and others. There has been much work in the area of PSC using Cs 2 AgBiBr 6 as an absorber, However, due to some critical issues of Cs 2 AgBiBr 6 , such as the film's broad bandgap which limits its capacity to absorb light, leading to corresponding PSC being typically restricted to around 4% efficiency. In this work, a lead-free PSC with Cs 2 AgBiBr 6 as the absorber has been engineered to resolve the issues by considering the experimental works in the literature to increase efficiency to 6.3% from a maximum 4.48% as reported in the literature. The output response of both design approaches, as well as the potentiality of future designs, are investigated in terms of output parameters, i.e., Open-Circuit Voltage (V OC ), Short-circuit Current density (J SC ), Fill Factor (FF), and Power Conversion Efficiency (PCE). Besides, this work also focuses on eliminating Sulphur from ETLs by working on several sulphides and oxide-based Electron Transport Layers (ETLs). Several solar cell device structures have been analyzed for their numerical simulation with sulphide ETLs such as ZnS, WS 2 , CdS, CdZnS and oxide ETLs such as TiO 2 , ZnO, WO 3 , IGZO. To progress towards eco-friendly PSCs, alternatives to sulphide, several transparent oxide alternatives (TiO 2 , ZnO, WO 3 , IGZO) have been considered as ETLs. These ETLs have been further doped with Mg to enhance the performance parameters. Mg-doped based ETLs additionally behaving as Hole-blocking layers (HBLs) in corresponding PSCs leads to comparatively significantly better performance in a number of aspects, including V OC (1.21 V), PCE (5.74%), J SC , and FF. The solar cell design has been optimized for high performance through various techniques such as varying ETL and absorber thickness, interface defects variation, series/shunt resistance, band to band recombination, and bandgap grading through doping. Also an effective electric field (E eff ) that depicts the conduction's impact has been calculated. Best performing device among different designs among PSCs with sulphide and oxide-based ETLs has been ZnS/Cs 2 AgBiBr 6 /Cu 2 O (PCE-6.3%) and Mg-doped (20%) ZnO/Cs 2 AgBiBr 6 /Cu 2 O (PCE-5.74%). These results may help researchers in their efforts to find the best-suited materials for the design of high-performance PSCs in the future.

Enhancing solar cell efficiency: lead-free double perovskite solar cells Cs2AgBiBr6 with magnesium-doped and Zn2SnO4 electron transport layer

Strategic integration of electron transport layer for high-performance optimized lead-free double perovskite solar cells with temperature dependence

Designing and Optimizing the Lead-Free Double Perovskite Cs2AgBiI6/Cs2AgBiBr6 Bilayer Perovskite Solar Cell

Exploring Lead Free Mixed Halide Double Perovskites Solar Cell

Exploring the Potential of Lead-Free Perovskite/ Kesterite Double Absorber Structure With Diverse Transport Layer Materials to Enhance Tandem Solar Cell Performance

Enhancing Solar Cell Efficiency: A Comparative Study of Lead-Free Double Halide Perovskites and using DFT and SLME Methods

SCAPS-1D Modeling of Hydrogenated Lead-Free Cs2AgBiBr6 Double Perovskite Solar Cells with a Remarkable Efficiency of 26.3%

Design and Device Numerical Analysis of Lead-Free Cs2AgBiBr6 Double Perovskite Solar Cell

Design and performance optimization of a novel tri-layer unleaded all inorganic lead-free mixed halide CsSnI 3-x Br x heterojunction solar cell

Enhancing CsSn0.5Ge0.5I3 Perovskite Solar Cell Performance via Cu2O Hole Transport Layer Integration

An In‐Depth Investigation of the Combined Optoelectronic and Photovoltaic Properties of Lead‐Free Cs2AgBiBr6 Double Perovskite Solar Cells Using DFT and SCAPS‐1D Frameworks

Device engineering of double perovskite based solar cells towards high-performance, eco-friendly solar cells

Design and Performance Exploration of a Lead-Free All-Inorganic Hydrogenated Cs2AgBiBr6-Based Double Perovskite Solar Cell: A Numerical Modeling Study

Enhanced Perovskite Solar Cell Performance by Adding Magnesium Acetate Using Two-Step Spin-Coating Method

Bandgap Engineering and Enhancing Optoelectronic Performance of a Lead-Free Double Perovskite Cs2AgBiBr6 Solar Cell via Al Doping

Polyfluorene incorporation for superior performance and band gap reduction: enhancing Cs2AgBiBr6 double perovskite solar cells

Numerical investigation and design optimization for enhanced efficiency of Cs2AgBiBr6 perovskite solar cell

A Multilayered Electron Extracting System for Efficient Perovskite Solar Cells

Overcoming the Limitation of Cs 2 AgBiBr 6 Double Perovskite Solar Cells Through Using Mesoporous TiO 2 Electron Extraction Layer

Alkali Metal Ion-Regulated Lead-free, All-Inorganic Double Perovskites for HTM-free, Carbon-Based Solar Cells

The Dawn of Lead-Free Perovskite Solar Cell: Highly Stable Double Perovskite Cs 2 AgBiBr 6 Film.