Abstract:The CLYC(Ce) (Cs2LiYCl6:Ce3+) scintillator can identify different particles with various specific energy losses and is capable of measuring the fast neutron energy via the Cl-35(n, p)S-35 reaction. Thus, it is rational to expect using this detector for monitoring the on-site neutron dose rate for astronauts or equipments working at a spacecraft, which may undergo the irradiation of cosmic rays of energetic protons or alpha particles that could induce the production of spallation neutrons. However, as the spallation neutrons, as well as the moderated neutrons, have an energy distribution from the thermal region to several hundred MeV, the direct measurement of the neutron spectrum, which helps calculate the exact value of dose rate in the spacecraft, requires that the energy response matrices should be known in advance. In this study, we calibrated a Phi 38 mm x 38 mm CLYC(Ce) scintillator detector with the Back-n beamline at the China Spallation Neutron Source (CSNS), acquiring its energy response matrices (ERM) ranging from 0.1 MeV to 100 MeV. To verify the CLYC(Ce) scintillator detector's capability for measuring neutrons with such a wide region, using the ERM, the energy spectrum of the Back-n beamline was reconstructed and the result conformed to the CSNS-measured result well; a good conformation between the reconstructed spectrum and the standard Watt fission neutron spectrum of Cf-252 was also observed. This calibrated detector then was used to measure the cosmic-ray induced neutron spectra at five different sites in China of various altitudes. The measured neutron fluxes at five different sites conformed to results predicted by the EXcel based Program Atmospheric Cosmic-ray Spectrum (EXPACS). The results presented in this study indicate that the CLYC(Ce) scintillator detector is promising to be used in spacecraft as a neutron monitor with a wide energy range.

Photon Detection Using Cerium Bromide Scintillation Crystals

A plastic scintillator and HPGe β-γ coincidence detection system

Development of a 3” LaBr3 SiPM-Based Detection Module for High Resolution Gamma Ray Spectroscopy and Imaging

Modelling the Response of CLLBC(Ce) and TLYC(Ce) SiPM-Based Radiation Detectors in Mixed Radiation Fields with Geant4

Development of a multi-layer high-efficiency GEM-based neutron detector for spallation sources

Study of the thermal neutron activation of a gamma-ray detector for BNCT dose monitoring

Demonstration of Gd-GEM detector design for neutron macromolecular crystallography applications

Development of wide range photon detection system for muonic X-ray spectroscopy

Development of a compact scintillator-based gamma-ray neutron detector for terrestrial and space applications

Material Properties of Popular Radiation Detection Scintillator Crystals for Optical Physics Transport Modelling in Geant4

Electron Emission Channeling for lattice location of radioactive isotopes in single crystals: Improvements from a Timepix3 quad detector and new PyFDD data analysis software

Potentialities of High-Resolution 3-D CZT Drift Strip Detectors for Prompt Gamma-Ray Measurements in BNCT

Measurement of Wide Energy Range Neutrons with a CLYC(Ce) Scintillator

Characterization of a medium-sized CLLB scintillator: single neutron/gamma detector for radiation monitoring

Development of a Phoswich Detector System for Radioxenon Monitoring

A feasibility study using an array of LaBr3(Ce) scintillation detectors as a Compton camera for prompt gamma imaging during BNCT

A Study on Determination of an Optimized Detector for Single Photon Emission Computed Tomography

Calibration of the scintillation of cerium-doped yttrium aluminum garnet crystals irradiated by monoenergetic 4 MeV energy electrons

Experimental validation of a spectroscopic gamma-ray detector based on a LaBr3 scintillator towards real-time dose monitoring in BNCT

Development of an ultrahigh resolution real time alpha particle imaging system for observing the trajectories of alpha particles in a scintillator

Compact Beta-Gamma Radioxenon Detection System with Improved Energy Resolution Using PIPS Detector