Abstract:Introduction: Subsurface structure of the Moon, at a depth from a few meters to hundreds of meters, not only provides important information concerning significant questions about the geologic and thermal history of the Moon, but also is critical for quantifying potential resources for future lunar exploration and engineering constrains for human outposts. Recently, with a renewed interest in lunar exploration, a variety of remote sensing instruments, including the Earth-based Arecibo radar [1], the Kaguya lunar radar sounder (LRS) [2], the Chang-E 1 microwave radiometers [3], and the Mini-SARs onboard Chandrayaan-1 and Lunar Reconnaissance Orbiter (LRO) [4,5], have been used to investigate lunar subsurface structure. Preliminary observations have been used to study global and regional regolith thickness [3,6], and deep stratigraphic structure [2]. However, explanations of these data usually depend upon the employed geophysical models, and sometimes are even ambiguous. In addition, interpretations of these observations have to be validated by in situ measurement before confident conclusions can be extended globally. Ground penetrating radar (GPR) is an important tool for probing the shallow subsurface in a variety of geologic settings [7]. In China’s Chang-E 3 lunar mission, a rover deployed GPR will be used to characterize near surface geology, structure and the dielectric properties of the Moon. In this study, we first discussed the scientific rationale for a lunar GPR and the main factors that affect a GPR performance. Then taking Sinus Iridum region as an example, radargrams are simulated using geometrical optics approach. Finally, the potential scientific return from GPR echoes is also discussed. Factors Affecting GPR Performance: An impulse GPR using a transmitted radar wave can delineate subsurface interfaces between materials with contrast of dielectric and/or structural properties. Penetration depth and range resolution are two major factors for designing a GPR for the Moon. The nominal penetration depth depends on the complex dielectric constant of the lunar material and GPR frequency, whereas the range resolution depends on the real part of the dielectric constant and the GPR bandwidth. Therefore, the dielectric property of the subsurface materials is a key parameter for the design of a lunar GPR. A recent estimation of the dielectric constant of the Moon shows that the real part varies from 2.5 to 3.4 and the loss tangent varies from 0.0036 to 0.028 [8]. Penetration depth of radar wave varies from 3 to 10 wavelengths over Maria, with a with a minimum located at Oceanus Procellarum and Mare Tranquillitatis, and that over highlands is about 20-25 wavelengths. A VHF and P band frequency can penetrate lunar subsurface from several to tens of meters. Taking the bandwidth of 100 MHz as an example, the range resolution in lunar subsurface varies globally from 0.8 to 0.95 m. Given the scientific objective and technique feasibility, a dual frequency GPR at 450 MHz and 60 MHz, with a nominal penetration depth roughly from 2 to 50 m for maria and 100 m for highlands, might be a better choice for Chang-E 3 rover. The range resolution in lunar subsurface varies from 20 cm over maria to that of 25 cm over highlands for a bandwidth of 400 MHz (for high frequency band), whereas from about 2 m to 2.5 m for a bandwidth of 40 MHz (for low frequency band). Preliminary Simulation Results: In this study, the geometrical optics approach is used to simulate GPR echo from lunar subsurface layers. Without loss of generality, lunar subsurface structure is represented by a multi-layer model, with the total number of layers n. Each layer is characterized by its thickness and complex dielectric constant. Then, the received GPR echo from the base of the m-the layer can be calculated as

Characterization of Regolith And Trace Economic Resources (CRATER): An Orbitrap‐based laser desorption mass spectrometry instrument for in situ exploration of the Moon

An Orbitrap-based laser desorption/ablation mass spectrometer designed for spaceflight

A lunar reconnaissance drone for cooperative exploration and high-resolution mapping of extreme locations

An autonomous lunar geophysical experiment package (ALGEP) for future space missions

Instrument study of the Lunar Dust eXplorer (LDX) for a lunar lander mission

A new experimental capability for the study of regolith surface physical properties to support science, space exploration, and in situ resource utilization (ISRU)

CraterGrader: Autonomous Robotic Terrain Manipulation for Lunar Site Preparation and Earthmoving

EXPLORATION SUBSURFACE STRUCTURE OF THE MOON: POTENTIAL SCIENTIFIC RETURN FROM A GROUND PENETRATING RADAR

Modeling Radar Scattering from the Lunar Regolith: Parametric Study on the Effect of Roughness and Ice Inclusions on CRP Measurement

A petrological and spectral characterisation of the NU-LHT-2M lunar highlands regolith simulant in preparation for the PROSPECT test campaign

Micro Quantitative Sampling Using Electric Adsorption for Lunar In-Situ Volatiles Exploration: Method and Validation

A Study on Lunar Regolith Quantitative Random Model and Lunar Penetrating Radar Parameter Inversion.

Quantitative Sampling and Thermal Extraction of the Lunar Regolith for Lunar Volatile Exploration: Method and Validation

Lunar Rover Localization Using Craters as Landmarks

Instrument study of the Lunar Dust eXplorer (LDX) for a lunar lander mission II: Laboratory model calibration

A Radar Package for Asteroid Subsurface Investigations: Implications of Implementing and Integration into the MASCOT Nanoscale Landing Platform from Science Requirements to Baseline Design

Lunar highlands simulant - geotechnical characterization, 3D discrete element modeling, and cone penetration simulations

Pseudo-Spectral Time-Domain Method for Subsurface Imaging with the Lunar Regolith Penetrating Radar

Development of Thermal Sensors and Drilling Systems for Lunar and Planetary Regoliths

ExoMars Raman Laser Spectrometer RLS, a tool for the potential recognition of wet target craters on Mars