Abstract:Simultaneous removal of ethane (C2H6) and acetylene (C2H2) from ethylene (C2H4) streams is of great importance in petrochemical industry and such separation based on adsorption technique is much more energy efficient compared to the conventional cryogenic distillation processes. However, a major challenge is that adsorbent materials (such as MOFs) that preferentially adsorb both C2H6 and C2H2 over C2H4 are very rare. In this work, we demonstrate that three Al-MOFs (MOF-303, MIL-160, and CAU-23) with high density of heteroatoms, as well as high stability, low cost, and easy scalability are capable of simultaneous removal of acetylene and ethane for ethylene purification in one step. Each MOF exhibits desirable C2H2 and C2H6 uptake capacity (> 5.5 mmol/g and > 4 mmol/g, respectively), as well as good C2H2/C2H4 selectivity (> 2) and C2H6/C2H4 selectivity (> 1.5). Notably, MOF-303 takes up 4.96 mmol/g of C2H6 at 298 K and 1 bar, the highest value among the three, with a C2H6/C2H4 selectivity in the range of 1.55~2.47. MIL-160 possesses a very high C2H2 uptake (9.1 mmol/g) and C2H2/C2H4 selectivity, 10.6, (1:1, v/v) at 298 K, much higher than all other MOFs that have been investigated to date for simultaneous removal of C2H6 and C2H2 from C2H4. The results from breakthrough experiments confirm that all three Al-MOFs show excellent performance for C2H4 purification in ternary mixture of C2H6/C2H4/C2H2 (1:1:1, v/v/v). For MOF-303, MIL-160, and CAU-23, polymer-grade C2H4 up to 0.164, 0.21, and 0.181mmol/g can be obtained from the equimolar ternary mixture in a single separation step from breakthrough experiment. Additionally, DFT calculations have been performed to further investigate the mechanism of the adsorption/separation for C2H6, C2H4, and C2H2.

New honeycomb MOF for C2H4 purification and C3H6 enrichment by separating methanol to olefin productsâ€

Geometry Control of Adsorption Sites in Sulfonate-Pillared Hybrid Ultramicroporous Materials for Efficient C4 Olefin Separations

A separation MOF with O/N active sites in nonpolar pore for One-step C2H4 purification from C2H6 or C3H6 mixtures

Rational Construction of Ultrahigh Thermal Stable MOF for Efficient Separation of MTO Products and Natural Gas

Active Sites Decorated Nonpolar Pore-Based MOF for One-step Acquisition of C2 H4 and Recovery of C3 H6

Honeycomb-Like Pillar-Layered Metal–Organic Frameworks with Dual Porosity for Efficient C 2 H 2 /CO 2 and C 2 H 2 /C 2 H 4 Separations

New Co-MOF adsorption material with pharynx-shaped channel and large cavity for record ethylene and propylene purification

Simultaneous removal of C2H2 and C2H6 for C2H4 purification by robust MOFs featuring high density of heteroatoms

A robust ethane-selective metal-organic framework with nonpolar pore surface for efficient C2H6/C2H4 separation

One-step purification of ethylene from ternary mixtures in an ultra-microporous interpenetrating MOF with unique constriction channels and F sites

A novel C2H2-selective microporous Cd-MOF for C2H2/C2H4 and C2H2/CO2 separation

A highly connected metal–organic framework with a specific nonpolar nanotrap for inverse ethane/ethylene separation

Tetranuclear-cluster-based MOF with low-polar pore environment for efficient C 2 H 6 /C 2 H 4 separation

Construction of saturated coordination titanium-based metal–organic framework for one-step C2H2/C2H6/C2H4 separation

Efficient inverse CO2/C2H2 separation driven by rare thermodynamic affinities difference in a porous MOF

Combination of Low-Polar and Polar Binding Sites in Aliphatic MOFs for the Efficient C2H6/C2H4 Separation.

Precise Pore Engineering of fcu‐Type Y‐MOFs for One‐Step C2H4 Purification from Ternary C2H6/C2H4/C2H2 Mixtures

Acetylene Separation by a Ca-MOF Containing Accessible Sites of Open Metal Centers and Organic Groups

Optimized pore environment for efficient high selective C2H2/C2H4 and C2H2/CO2 separation in a metal-organic framework

Fluorocarboxylic acid‐modified MOF‐808 with enhanced acetylene adsorption capacity and C2H2/C2H4 separation performance

A Stable Layered Microporous MOF Assembled with Y-O Chains for Separation of MTO Products