Abstract:Background: Chlorophenols (CPs) constitute a group of organic pollutants that are introduced into the environment as a result of several man-made activities, such as uncontrolled use of pesticides and herbicides, and as byproducts in the paper pulp bleaching. Promising removal technologies of chlorinated aromatics consist in the application of advanced oxidation processes (AOPs) that can provide an almost total degradation of a variety of contaminants. Among these, wide application find Fenton systems based on generation of reactive species having a high oxidizing power, such as hydroxyl radical HO*. Our objective was that of determining the overall degradation efficiency of the model compound 2,4-dichlorophenol (DCP) by thermal Fenton-type oxidation systems with a view toward defining in more details relevant process parameters, the effect of reaction temperature and of co-catalyst Cu2+. Methods: Reaction conditions were similar to those generally adopted as optimal in many practical applications, i.e. pollutant/Fe2+ (as FeSO4) ratio ca. 20, Fe2+/Cu2+ (co-catalyst) 2:1, pH adjusted and controlled at pH 3, and H2O2 in excess (up to four-fold over the stoichiometric amount required for complete mineralization). Results and discussion: The results demonstrate that it is advantageous to carry out the reaction at a temperature markedly higher (70 degrees C) than ambient. The stepwise addition of H2O2 in aliquots yields an efficient transformation, while allowing a convenient control of the reaction exothermicity. Under these conditions, the essentially complete removal of the initial DCP is accomplished using just one equiv of H2O2 during 15 min; excess H2O2 (5 equivalents) yields extensive substrate mineralization. Also relevant, at 70 degrees C dechlorination of the initial DCP (and of derived reaction intermediates) is remarkably extensive (3-5% residual TOX), already with the addition of 1 equiv of H2O2. At the end of the reaction, IC and IC-MS analyses of the solution reveal that only low-molecular weight carboxylic acid (acetic, formic, oxalic, malonic, tartaric, etc.) contribute to the residual TOC. Conclusions: The whole of the results herein point to the advantage of performing the process at temperatures substantially higher than ambient (70 degrees C). Under the conditions adopted, almost complete degradation of the initial toxic compound can be achieved using hydrogen peroxide in fair excess (e.g., 3.5 equiv H2O2). Recommendations and outlook: In applying practical Fenton-type degradation systems to heavily polluted wastes, either for the pre-treatment of waters with a high COD value prior to biodegradation or for complete mineralization of pollutants, the set up of appropriate reaction conditions appears to be a key factor. Also, it is desirable to keep the concentration of iron salts within the lower limits in order to minimize the production and disposal of iron oxide sludges.

Exploring a Substitute for Hydrogen Peroxide in Fenton Process – A Case Study on the COD Removal of Acid Orange 8

Remediation on underground water pollution using Fenton Oxidation Method

Sodium hypochlorite as an alternative to hydrogen peroxide in Fenton process for industrial scale

A Novel H2O2-persulfate Hybrid System Supported by Electrochemically Induced Acidic and Alkaline Conditions for Organic Pollutant Removal

Integration of •So4−-Based AOP Mediated by Reusable Iron Particles and a Sulfidogenic Process to Degrade and Detoxify Orange II

A persulfate oxidation system for removing acid orange from aqueous solution: Evaluation and degradation mechanism

A Novel and Quick Method to Avoid H2O2 Interference on COD Measurement in Fenton System by Na2SO3 Reduction and O2 Oxidation

Practical applications of the Fenton reaction to the removal of chlorinated aromatic pollutants. Oxidative degradation of 2,4-dichlorophenol

A Novel Graphene Oxide-Carbon Nanotubes Anchored Α-Feooh Hybrid Activated Persulfate System for Enhanced Degradation of Orange II

Simultaneous mitigation of disinfection by-product formation and odor compounds by peroxide/Fe(II)-based process: Combination of oxidation and coagulation

Comparative investigation on the removal of methyl orange from aqueous solution using three different advanced oxidation processes

Degradation of C.I. Acid Orange 7 by the Advanced Fenton Process in Combination with Ultrasonic Irradiation

Cu(II)-enhanced Degradation of Acid Orange 7 by Fe(II)-activated Persulfate with Hydroxylamine over a Wide Ph Range

The Removal of Cod from Bleaching Effluents by Fenton'S Reagent: Effect of System Parameters and Kinetic Study

Novel Fenton Process of Co-catalyst Co9S8 Quantum Dots for Highly Efficient Removal of Organic Pollutants.

Simultaneous Utilization of Electro-generated O2 and H2 for H2O2 Production: an Upgrade of the Pd-catalytic Electro-Fenton Process for Pollutants Degradation

Enhanced Orange II Removal Using Fe/Mn/Mg2-LDH Activated Peroxymonosulfate: Synergistic Radical Oxidation and Adsorption

Efficiently Degradation of Perfluorooctanoic Acid in Synergic Electrochemical Process Combining Cathodic Electro-Fenton and Anodic Oxidation

Removal of Organic Pollutants in Tannery Wastewater from Wet-Blue Fur Processing by Integrated Anoxic/Oxic (A/O) and Fenton: Process Optimization

Efficient Removal of Cu(II) Organic Complexes by Polymer-Supported, Nanosized, and Hydrated Fe(III) Oxides Through a Fenton-like Process.

Comparison of Sulfate Radical-advanced Oxidation Process (SR-AOP) and Fenton Oxidation for Advanced Treatment of Papermaking Wastewater