Abstract:The accumulation of pollution and any kinds of contamination on the glass cover of the solar cell affects the efficiency of the photovoltaic (PV) systems. The contamination on the glass cover can absorb and reflect a certain part of the sunlight irradiation, which can decrease the intensity of the light coming in through the glass cover. With the study, it was planned to develop self-cleaning coatings for the PV systems. It was aimed to prevent or reduce the contamination-induced efficiency loss of the existing PV systems. In the scope of the project, SiO 2 /WO 3 and SiO 2 /WO 3 /ZnO composites were coated from their solutions on the glass substrates using a dip-coating technique. WO 3 was selected as a photocatalyst semiconductor. Under the UV light irradiation, WO 3 could absorb the photons of the UV light, generating the photoinduced charge carriers. The photoexcited charge carriers provide both the photoinduced hydrophilicity on the surface of the coating and the photocatalytic degradation of the organic contaminants accumulated on the surface of the coating, which allows water droplets to spread and flow on the surface of the cover glass to remove the contaminations. However, the recombination rate of the photoexcited charge carriers on the WO 3 film was high. In order to suppress the recombination of the photoinduced charge carriers, WO 3 was coupled with SiO 2 and ZnO. Both of these semiconductors improved the photocatalytic activity of the WO 3 film. Although SiO 2 has superior features in terms of the light transmission, it was not very effective under UV light as a photocatalyst alone. The widely preferred photocatalyst ZnO was added into the composite film structure to enhance the photocatalytic activity. The self-cleaning mechanism of the film coatings on a solar cell was investigated through the photocatalytic dye removal efficiency on the as-prepared film samples. There was a slight decrease in the light transparency and the solar cell efficiency because of the WO 3 content of the composite film. On the other hand, coupling the SiO 2 /WO 3 film with ZnO enhanced the photocatalytic activity, and it suppressed the reduction effect of the WO 3 phase on both the light transparency and the solar cell efficiency. The photocatalytic dye removal efficiency was increased to over 90% after 240 min of UVA light irradiation. In addition, the solar cell coated with the SiO 2 /WO 3 /ZnO film provided almost the same solar cell efficiency as the uncoated solar cell. The water contact angle measurement also exhibited the photocatalytic degradation of the model contamination on the glass cover of the solar cell under the UVA light irradiation.

Visible light-induced self-cleaning ZnO coated-clay roofing tiles: The role of coating concentration on structural and photocatalytic properties

SiO2/WO3/ZnO based self-cleaning coatings for solar cells

Eco-friendly natural clay bentonite supported zirconium titanate (BT–ZrTiO4): synthesis, characterization and photocatalysis and self-cleaning activities

Preparation of a photocatalytic TiO2/ZnTiO3 coating on glazed ceramic tiles

Photocatalytic Degradation of Organic Dyes with Er3+:YAlO3/ZnO Composite under Solar Light

Study on Preparing Photo-Catalysis of ZnO Carried by Natural Zellites

Nanowire-based multifunctional antireflection coatings for solar cells

ZnO/Zn(OH)2 nanoparticles and self-cleaning coatings for the photocatalytic degradation of organic pollutants

Enhanced Photocatalytic Performance under Ultraviolet and Visible Light Illumination of ZnO Thin Films Prepared by Modified Sol-Gel Method

Preparation and photocatalytic activity of visible light-responsive zinc oxide/activated carbon fiber composites

Titanium Dioxide Sol-Gel/Zinc Oxide Powder-Coated Clay Beads In Photocatalytic Reactor

Characterization and Optimization of AZO Nanoparticles as Coatings for Flexible Substrates toward High IR Reflectivity

Alkyd resin based hydrophilic self-cleaning surface with self-refreshing behaviour as single step durable coating

Self-cleaning durability assessment of TiO2/SiO2 photocatalysts coated concrete: Effect of indoor and outdoor conditions on the photocatalytic activity

A new way to tune photocatalytic activity, surface morphology, and structural/optical parameters of ZrO2 thin films using different Zr sources along with annealing temperature and film thickness

Enhancing Sunlight-Driven Photocatalysis: High Transparency and Hydrophilic Advancements in Ba-Doped ZnO Thin Films

Facile Preparation of Composite Coatings with Incorporated 13X Zeolite and CeO2

Synthesis of zeolite‐derived blue nanopigment and its modification for hydrophobic coating on ceramic tile

Unveiling the synthesis of highly efficient cerium-doped zinc nanoferrites anchored over graphitic carbon nitride for enhanced photocatalytic water purification implications

Synthesis of cerium-doped zinc oxide nanomaterials by precursor method with improved photodegradation activity for Methylene blue and Red CL-5B dye

Enhancement in Visible Light-Responsive Photocatalytic Activity by Embedding Cu-doped ZnO Nanoparticles on Multi-Walled Carbon Nanotubes