Abstract:The classic vibration energy collector has functional restrictions, and it can only collect vibration energy in one or two dimensions. At the same time, it has issues with low output power in the low-frequency vibration region and a limited reaction frequency range. This research proposes a segmented nonlinear broadband piezoelectric-magnetic coupled energy collector capable of collecting vibration energyin different directions. The collector is equivalent to current state-of-the-art research inthat it can collect vibration energy in three dimensions while also having a widecollection frequency and a high power density.The collection consists of ahemispherical support structure and four fundamental piezoelectric beam collisioncomponents. The rationality of the collision segmentation nonlinear principle is firstclarified through theoretical calculation and analysis, and then the collision design isapplied between the ends of different cantilever beams to broaden the captured energyfrequency band, while parallel piezoelectric beams use a 45° tilt treatment to fullyutilize the geometrical properties of the tilted beams for multidirectional energycollection. In addition, the collector introduces a magnetic coupling effect to create abistable structure via magnetic contact. Comsol 5.6 software is used to model andsimulate the planned 45° tilted beam structure, which clarifies the piezoelectric beam'slinear intrinsic frequency characteristics and multi-directional geometric aspects.Tofurther verify the collector's validity, a physical model is built and a vibrationexperiment apparatus is created. The experimental results demonstrate that thecollector's effective bandwidth range is up to 6.3Hz under 1g acceleration excitation,representing a 125.0% increase in bandwidth when compared to the cantilever beamwith a linear array.At 14Hz frequency, the collector produces a maximum total outputpower of 19.52mW and a power density of up to 15.25mW·cm-3 when excitation is provided in the Z-direction.

A sectional nonlinear wideband piezoelectric-magnetic coupled energy collector for collecting multi-directional vibrational energy

Research on Multi-DirectionalPiezoelectric-Electromagnetic CompositeVibration Energy Harvesters

A piezoelectric cantilever-asymmetric-conical-pendulum-based energy harvesting under multi-directional excitation

Magnetic Force-Assisted Nonlinear Three-Dimensional Wideband Energy Harvester Using Magnetostrictive/Piezoelectric Composite Transducers

Design and experimental investigation of a positive feedback magnetic-coupled piezoelectric energy harvester

Modeling and analysis of magnetically coupled piezoelectric dual beam with an annular potential energy function for broadband vibration energy harvesting

A magnetic structure for broadband piezoelectric vibration energy harvester

Multimodal Multidirectional Piezoelectric Vibration Energy Harvester by U-Shaped Structure with Cross-Connected Beams

A Magnetically Coupled Piezoelectric–Electromagnetic Low-Frequency Multidirection Hybrid Energy Harvester

Study of a piezoelectric energy harvesting collaborative strategy based on the synergy of multi‐frequency technique and magnetic nonlinear technique

A Hybrid Piezoelectric and Electromagnetic Broadband Harvester with Double Cantilever Beams

A nonlinear M-shaped tri-directional piezoelectric energy harvester

Hybrid magnetic coupling and impact enhanced low, adjustable and broadband piezoelectric vibration energy harvesting

A Bi-Axial and Wideband Vibration Energy Harvester Using Magnetoelectric Transducer

Polyvinylidene Fluoride‐Based Vibration Energy Harvester with Piezoelectric and Electromagnetic Effects

Wideband Vibration Energy Harvester with High Permeability Magnetic Material

Noncontact magnetically coupled piezo-electromagnetic rotary energy harvester

A Multi-Mode Broadband Vibration Energy Harvester Composed of Symmetrically Distributed U-Shaped Cantilever Beams

An enhanced broadband piezoelectric energy harvester via elastic amplification structure for multidirectional vibration

Nonlinear Piezoelectric Structure for Ultralow-frequency Band Vibration Energy Harvesting with Magnetic Interaction

Design and research of hybrid piezoelectric-electromagnetic energy harvester based on magnetic couple suction-repulsion motion and centrifugal action