Abstract:The introduction of polyhedral ZIF‐67 particles and ionic liquid electrolytes (ILE) to the PEO/LiTFSI‐based composite polymer electrolytes serves as important additives to enhance the properties of PEO polymer. Additionally, the optimization of the polymer electrolyte thickness significantly boosts the ionic conductivity, lithium‐ion transference number, and overall performance of ASSLMB batteries. Polyethylene oxide (PEO)/lithium bis(trifluoromethanesulfonyl)imide (LiTFSI) is among the most promising candidates for developing solid polymer electrolytes (SPEs) for all‐solid‐state lithium‐metal batteries (ASSLMBs). However, practical applications of the PEO/LiTFSI system face challenges due to its relatively low ionic conductivity and low Li+ transference number. To address these issues, a method is proposed that incorporates multiple components, including zeolitic imidazolate frameworks (ZIF‐67) as fillers and ionic liquid electrolytes (ILEs) as plasticizers, into a PEO/LiTFSI matrix. By optimizing the fabrication process, ultra‐thin membranes of the integrated electrolyte PEO/LiTFSI‐ILE‐ZIF‐67 (PLiZ) with a thickness of 32 μm are developed, achieving high ionic conductivity (1.19 × 10−4 S cm−1 at 25 °C), broad electrochemical stability (5.66 V), and high lithium‐ion mobility (0.8). As a result, the fabricated ASSLMBs exhibited excellent cycle stability at both room temperature and 60 °C, delivering an initial specific discharge capacity of 166.4 mAh g−1 and an impressive capacity retention of 83.7% after 1000 cycles at 3C under 60 °C, corresponding to a low fading rate of 0.0163% per cycle. Additionally, the designed SPEs demonstrated high safety properties, as shown by the successful cutting and folding of a working LiFePO4/PLiZ/Li pouch cell. Therefore, this study presents a comprehensively improved method for developing high‐performance ASSLMBs.

Constructing flame retardant microspheres for safe and stable poly (ethylene oxide) based All-Solid-State batteries at high voltage

Enabling Stable Cycling of 4.2 V High‐Voltage All‐Solid‐State Batteries with PEO‐Based Solid Electrolyte

Constructing an ultrathin, multi-functional polymer electrolyte for safe and stable all-solid-state batteries

Lithium Bromide-Induced Organic-Rich Cathode/Electrolyte Interphase for High-Voltage and Flame-Retardant All-Solid-State Lithium Batteries

Bifunctional flame retardant solid-state electrolyte toward safe Li metal batteries

Constructing flame-retardant gel polymer electrolytes via multiscale free radical annihilating agents for Ni-rich lithium batteries

Self‐Extinguishing and Low‐Cost Quasi‐Solid Polymer Electrolyte for Room Temperature Lithium Metal Batteries

Constructing Nano‐Interlayer Inhibiting Interfacial Degradation toward High‐Voltage PEO‐Based All‐Solid‐State Lithium Batteries

In-situ encapsulating flame-retardant phosphate into robust polymer matrix for safe and stable quasi-solid-state lithium metal batteries

4.2 V poly(ethylene oxide)-based all-solid-state lithium batteries with superior cycle and safety performance

Poly(m-phenylene isophthalamide)-reinforced polyethylene oxide composite electrolyte with high mechanical strength and thermostability for all-solid-state lithium metal batteries

4.2 V polymer all-solid-state lithium batteries enabled by high-concentration PEO solid electrolytes

In Situ Polymerized Flame‐Retardant Crosslinked Quasi Solid‐State Electrolytes for High‐Voltage Lithium Metal Batteries

Efficient Nanoarchitectonics of Solid-Electrolyte-interface for High-Performance All-Solid-state Lithium Metal Batteries Via Mild Fluorination on Polyethylene Oxide

Flame‐Retardant Polyurethane‐Based Solid‐State Polymer Electrolytes Enabled by Covalent Bonding for Lithium Metal Batteries

Constructing Interfacial Nanolayer Stabilizes 4.3 V High‐Voltage All‐Solid‐State Lithium Batteries with PEO‐Based Solid‐State Electrolyte

Three-dimensional Polyimide Nanofiber Framework Reinforced Polymer Electrolyte for All-Solid-state Lithium Metal Battery

Highly Safe, Ultra‐Thin MOF‐Based Solid Polymer Electrolytes for Superior All‐Solid‐State Lithium‐Metal Battery Performance

Flame retardant polyurethane acrylate solid polymer electrolyte based on the synergistic effect of modified halloysite nanotubes for safe lithium batteries

Triple‐Layered Noncombustible PEO‐Based Solid Electrolyte for Highly Safe Lithium‐Metal Batteries