Abstract:The Atlantic razor clam exhibits exceptional penetration performance in wet sands by periodically expanding and contracting its shell and foot during burrowing. Essentially, this periodic penetration movement can be simplified as a cyclic alternation of cylinder expansion and cone penetration, which are analogous to the geotechnical pressuremeter test and the cone penetration test. The dynamic penetration movement of the razor clam was simplified as four major connective steps—cylinder expansion, cone penetration, cylinder contraction, and cylinder retraction—and the kinematics was parameterized based on the biological data. Using a simplified and idealized synthetic dry sand sample, we attempted to model the clam-inspired penetration process using two common geomechanics tools, an analytical model based on cavity expansion theory and a numerical discrete element method (DEM), and to showcase the advantages and limitations of these two approaches in the dynamic penetration modeling. In the analytical model, the four consecutive steps were assumed to be independent. The penetration resistance and energy consumption for each step were therefore roughly estimated using cavity expansion theory; in parallel, the independent cylinder expansion and cone penetration process as well as the clam-inspired coupled dynamic penetration process were also modeled using the DEM method. When the results were compared, it was found that the adopted cavity expansion theory solutions can predict the independent cylinder expansion and cone penetration behaviors, given that the parameters were carefully chosen and calibrated. However, it cannot capture the interference effect in a coupled dynamic penetration process. Specifically, the analytical model overestimates the cone penetration resistance of the coupled dynamic penetration process; the cylindrical shaft expansion causes stress release around the cone, leading to a reduction in the tip resistance as the cone continues to penetrate. The analytical model also underestimates the expansion pressure in the dynamic penetration process, which is attributed to the change in stress and fabric state caused by the cyclic expansion/contraction movement. Moreover, the clam-inspired dynamic penetration was found to reduce the energetic cost on the penetration of cone and shaft for about 36% and still maintain a slightly lower energy consumption with additional cost on the cyclic shaft expansion, compared with the pure cone penetration strategy. With a better future understanding of the highly effective and efficient self-burrowing behavior of natural burrowers, it is envisioned to develop self-burrowing robots for a spectrum of geotechnical applications.

Dynamics of digging in wet soil

Modeling Clam-inspired Burrowing in Dry Sand using Cavity Expansion Theory and DEM

A Microstructural View of Burrowing with RoboClam

Burrowing dynamics of aquatic worms in soft sediments

Fundamentals of burrowing in soft animals and robots

SBOR: a minimalistic soft self-burrowing-out robot inspired by razor clams

Self-propulsion via slipping: Frictional swimming in multilegged locomotors

Self-propulsion via slipping: frictional swimming in multi-legged locomotors

Bio-inspired Dual-auger Self-burrowing Robots in Granular Media

Discrete element models for understanding the biomechanics of fossorial animals

Mechanics and optimization of undulatory locomotion in different environments, tuning geometry, stiffness, damping and frictional anisotropy

Dynamics of magnetoelastic robots in water-saturated granular beds

Efficient reciprocating burrowing with anisotropic origami feet

Locomotor benefits of being a slender and slick sand swimmer

Randomly Distributed Crab Burrows Enhance Groundwater Flow and Salt Transport in Creek‐Marsh Systems

Coordinating tiny limbs and long bodies: geometric mechanics of diverse undulatory lizard locomotion

Radial Expansion Favors the Burrowing Behavior of Urechis unicinctus

Ground Reaction Forces and Energy Exchange During Underwater Walking

Geometric phase predicts locomotion performance in undulating living systems across scales

Mechanical diffraction reveals the role of passive dynamics in a slithering snake

Underwater locomotion strategy by a benthic pennate diatom Navicula sp.