Abstract:Fe-based amorphous materials offer new opportunities for magnetic sensors, actuators, and magnetostrictive transducers due to their high saturation magnetostriction (λs = 20–40 ppm) and low coercive field compared with polycrystalline Fe-based alloys, which have high magnetostriction but large coercive fields and Co-based amorphous alloys with small magnetostriction (λs = −3 to −5 ppm). Additive layer manufacturing (ALM) offers a new fabrication technique for more complex net-shaping designs. This paper reviews the two different ALM techniques that have been used to fabricate Fe-based amorphous magnetic materials, including the structural and magnetic properties. Selective laser melting (SLM)—a powder-bed fusion technique—and laser-engineered net shaping (LENS)—a directed energy deposition method—have both been utilised to fabricate amorphous alloys, owing to their high availability and low cost within the literature. Two different scanning strategies have been introduced by using the SLM technique. The first strategy is a double-scanning strategy, which gives rise to maximum relative density of 96% and corresponding magnetic saturation of 1.22 T. It also improved the glassy phase content by an order of magnitude of 47%, as well as improving magnetic properties (decreasing coercivity to 1591.5 A/m and increasing magnetic permeability to around 100 at 100 Hz). The second is a novel scanning strategy, which involves two-step melting: preliminary laser melting and short pulse amorphisation. This increased the amorphous phase fraction to a value of up to 89.6%, and relative density up to 94.1%, and lowered coercivity to 238 A/m. On the other hand, the LENS technique has not been utilised as much as SLM in the production of amorphous alloys owing to its lower geometric accuracy (0.25 mm) and lower surface quality, despite its benefits such as providing superior mechanical properties, controlled composition and microstructure. As a result, it has been commonly used for large parts with low complexity and for repairing them, limiting the production of amorphous alloys because of the size limitation. This paper provides a comprehensive review of these techniques for Fe-based amorphous magnetic materials.

Computational study on microstructure evolution and magnetic property of laser additively manufactured magnetic materials

Thermal behavior and microstructural evolution of additively manufactured Ni-based superalloys via multi-scale simulation

Tailoring magnetic hysteresis of Fe-Ni permalloy by additive manufacturing: Multiphysics-multiscale simulations of process-property relationships

The Microstructure and Magnetic Properties of a Soft Magnetic Fe-12Al Alloy Additively Manufactured via Laser Powder Bed Fusion (L-PBF)

Microstructure and Mechanical Properties of Selective Laser Melted Mg-9 Wt%al Powder Mixture

Selective laser melting of permalloy magnetic core with complex geometry

Tailoring magnetic hysteresis of additive manufactured Fe-Ni permalloy via multiphysics-multiscale simulations of process-property relationships

Laser Additive Manufacturing of Fe-Based Magnetic Amorphous Alloys

Integrating machine learning and multi-objective optimization to investigate the magnetic and mechanical properties of FeSiCr soft magnetic composite processed by selective laser melting

Additive Manufacturing: A New Concept For End Users. The Case Of Magnetic Materials

Additive manufacturing of magnetic materials

Numerical Simulation of the Evaporation Behavior of Fe-Mn Heterogeneous Powder in Selective Laser Melting Process

Additive manufacturing of Ni-Mn-Sn shape memory Heusler alloy -- Microstructure and magnetic properties from powder to printed parts

Magnetic and mechanical properties of additive manufactured Fe-3wt.%Si material

Recent Advances in Additive Manufacturing of Soft Magnetic Materials: A Review

Fabricating Homogeneous FeCoCrNi High-Entropy Alloys via SLM In Situ Alloying

Experimental and Computational Analyses of Structural and Mechanical Deviations in Magnesium Alloy Manufacturing with Selective Laser Melting

A hybrid finite-element and cellular-automaton framework for modeling 3D microstructure of Ti–6Al–4V alloy during solid–solid phase transformation in additive manufacturing

A machine learning framework to predict local strain distribution and the evolution of plastic anisotropy & fracture in additively manufactured alloys

Developing the AM G-code based thermomechanical finite element platform for the analysis of thermal deformation and stress in metal additive manufacturing process

Development of FeSi steel with increased Si content by laser powder bed fusion technology for ferromagnetic cores application: Microstructure and properties