Abstract:Magnetorheological (MR) fluid exhibits the ability to modulate its shear state through variations in magnetic field intensity, and is widely used for applications requiring damping. Traditional MR dampers use the current in the coil to adjust the magnetic field strength, but the accumulated heat can cause the magnetic field strength to decay if it works for a long time. In order to deal with this shortcoming, a novel MR damper is proposed in this paper, which is based on a variable displacement permanent magnet to adjust the output resistance torque and applied to an exoskeleton joint for human load transfer assistance. A finite element model is used to determine the size parameters of the magnet and separator, so that the maximum output torque is optimal and the torque is uniformly distributed with the magnet displacement. The MR damper was characterized and calibrated on the experimental bench to make it controllable. The novel design enables the torque mass density of the MR damper to reach 8.83Nmm/g, the torque volume density to reach 48.7N/mm2, and has stability for long-term operation. Based on the torque control method proposed, a preliminary human experiment is conducted. The ground reaction force (GRF) data of the subjects is analyzed here, which represents the effect of load transfer to the exoskeleton. Compared with no exoskeleton, the GRF with exoskeleton is significantly reduced: the peak GRF in early stance phase is reduced by 24.14%, and in late stance phase is reduced by 19.77%. Based on our net load benefit (NLB) and net force benefit (NFB) evaluation indicators, the effectiveness of the proposed MR damper exoskeleton for human weight bearing assistance is established.

Magnetorheological Damper Design and Numerical Analysis for Assistive Knee Exoskeleton

Modeling and Experiments Study of Inverse Magnetostrictive Effect for a New Kind of Passive Adaptive MR Damper

Modeling and experimental evaluation of vibration reduction of hydraulic-driven joint with a MRF damper

Modeling of Passive Adaptive MR Damper

Optimal Design of Magnetic System for the Magnetorheological Intelligent Damper

Design, Testing and Control of a Magnetorheological Damper for Knee Prostheses

Dynamic Characteristics and Modeling of A New Magnetorheological Damper for Broadband Vibration Control

Magnetorheological Damper With Variable Displacement Permanent Magnet for Assisting the Transfer of Load in Lower Limb Exoskeleton

Design and Simulation of a Rotating Magnetorheological Fluid Damper for the Ankle Rehabilitation Robot.

Magnetic Circuit Design and Mechanical Performance Study for a MR Damper

A Bianisotropic Damper Based on Magnetorheological Fluid for a Quasi-Passive Load-Bearing Exoskeleton

Dynamic Modeling of Large-Scale Magnetorheological Damper Systems for Civil Engineering Applications

Frequency-Dependent Bouc–Wen Modeling of Magnetorheological Damper Using Harmonic Balance Approach

Experimental Investigations on the Nonlinear Dynamics of Magnetorheological Dampers

A Novel Magnetorheological Damper Combing Multi-Disc and Multi-Drum Structures

Principle, Modeling, and Testing of an Annular-Radial-Duct Magnetorheological Damper

Design and Experiment Evaluation of a Magneto-Rheological Damper for the Legged Robot.

Design, theoretical modeling, and experimental analysis of a magnetorheological damper with radial damping gap

Design and Modeling of a Novel Double-Piston Magnetorheological Damper

Dynamic Analysis of Magnetorheological Damper Incorporating Elastic Ring in Coupled Multi-Physical Fields

Double-sigmoid Model for Magnetorheological Damper and Corresponding Experiment Verification