Abstract:Magnetic Resonance Imaging (MRI) experiments have been performed in conjunction with Direct Numerical Simulations (DNS) to study neutrally buoyant particle-laden pipe flows. The flows are characterized by the suspension liquid Reynolds number ($Re_s$), based on the bulk liquid velocity and suspension viscosity obtained from Eilers' correlation, the bulk solid volume fraction ($\phi_b$) and the particle-to-pipe diameter ratio ($d/D$). Six different cases have been studied, each with a unique combination of $Re_s$ and $\phi$, while $d/D$ is kept constant at 0.058. These cases ensure that the comparison is performed across different flow regimes, each exhibiting characteristic behavior. In general, an excellent agreement is found between experiment and simulation for the average liquid velocity and solid volume fraction profiles. This study presents, for the first time, accurate and quantitative velocity and volume fraction profiles of semi-dilute up to dense suspension flows using both experimental and numerical methods. The discrepancy between the experiments and simulations can be explained by various reasons, including a difference in particle size distribution, uncertainty in experimental parameters used as an input for the DNS, slight variations in particle roughness and frictional collisions in the simulations. Eventually, three different flow regimes are identified. For low bulk solid volume fractions a drag increase is observed. For moderate $\phi_b$ the drag is found to decrease, due to particle accumulation at the pipe centre. For high volume fractions the drag is found to decrease further. For solid volume fractions of 0.4 a drag reduction higher than 25% is found. This drag reduction is linked to the strong viscosity gradient in the radial direction, where the relatively low viscosity near the pipe wall acts as a lubrication layer between the pipe wall and the dense core.

DNS and RANS for core-annular flow with a turbulent annulus

Steady-state Simulation of Core-Annulus Flow in a Circulating Fluidized Bed (CFB) Riser

Direct Numerical Simulation of Channel Flow with Real Surface Roughness Using a Ghost Cell Immersed Boundary Method

Comparison of DNS and RANS Calculations of the Round Jet Flow in the Near Field Region

Direct numerical simulation of laminar, transitional and turbulent radially inward flow between closely spaced corotating disks

Direct Numerical Simulation of Turbulent Flows Through Concentric Annulus with Circumferential Oscillation of Inner Wall

Direct Numerical Simulation of Turbulent Pipe Flow.

Direct numerical simulation of two-phase pipe flow: influence of the domain length on the flow regime

Flow in Helical Annular Pipe

A New Model for Viscous Oil-Water Eccentric Core Annular Flow in Horizontal Pipes

Experimental Investigation on Air-Water Two-Phase Flow Pattern and Pressure Drop in Vertical Upward Annulus

Large Eddy Simulation of Turbulent Flows in a Rotating Concentric Annular Channel

DNS of Incompressible Turbulent Reacting Flows and Validation of the RANS Turbulence-Chemistry Model

Semi-analytical solutions of Newtonian fluid-FENE-P fluid core annular flow

A Theoretical Model of Annular Upward Flow in A Vertical Annulus Gap

Numerical Study On Flow And Heat Transfer In Concentric And Eccentric Annuli

Heat transfer and flow structure in annular convection

Numerical Research on Local Heat Transfer Distribution of Liquid Sodium Turbulent Flow in an Annulus

Simulation of Swirling Turbulent Flows and Heat Transfer in an Annular Duct

From nearly homogeneous to core-peaking suspensions: insight in suspension pipe flows using MRI and DNS

DNS Study of turbulent heat transfer in an elliptical pipe flow subjected to system rotation about the major axis