Abstract:Solid solutions of ceramic pigments of red shade have been synthesized based on YAlO3 perovskite structure doped with chromium by means of conventional synthesis; that is, the “ceramic route”. To optimize this synthesis, an emphasis has been made on the study of stoichiometry, calcination conditions and mineralizer incorporation. Various studies have demonstrated the high stability of perovskite structures, which ensures stable coloration at high temperatures. This is a highly important factor in the ceramic sector, given the scarcity of red glazes functional at temperatures close to those required of porcelain stoneware and their environmental constraints. Such a limitation makes it impossible in the European community to manufacture using toxic materials such as Se and Cd (cadmium sulfoselenide) that offer interesting colors at low temperatures. Pigments have been synthesized within the Y1−xCrxAlO3, YCrxAl1−xO3 and Y1−xAl1−yCrx+yO3 chromium-doped systems in molar ratios between n = 0.01 molar and n = 0.10 molar. The pigments obtained have been characterized by X-ray diffraction to identify the crystalline phases responsible for the shade; that is, the formation of the perovskite crystalline structure YAlO3 responsible for the red shade, together with lateral phases of garnet Y3Al5O12 of lower intensity. Visible ultraviolet spectrophotometry shows absorption bands corresponding to Cr(III) in octahedral position and the appearance of Cr(IV) in both octahedral and tetrahedral positions. The morphology of the samples was studied using a scanning electron microscope, obtaining information from the secondary and back scattered electrons. The viability of its use in ceramic glazes was verified after applying them mixed at 4% by weight in a glaze to an industrial porous single-firing cycle, collecting the L*a*b* chromatic coordinates using a visible ultraviolet spectrophotometer based on the CIE L*a*b* system, giving rise to red colorations.

Influence of crystallinity on chromatic parameters of ceramic pigments preparation by sol-gel method and solid state method

In-Situ Anatase Flake Crystals Prepared By Sol-Gel Method At Low Temperature

Synthesis, Characterization and Application of Submicron ZrSiO4 Powder Via Sol-Gel-microemulsion-hydrothermal Method

Al2O3 AND ZrO2 CERAMIC MATERIALS OBTAINED BY SOL-GEL METHOD

A Study of Formation and Photoluminescence Properties of ZnO Quantum Dot Doped Zinc-Alumino-silicate Glass Ceramic

Preparation of Zirconia Powders by Sol-gel Process

The Effect of Ni2+ Ions Substitution on Structural, Morphological, and Optical Properties in CoCr2O4 Matrix as Pigments in Ceramic Glazes

Sol-Gel Production of Alkaline-Free Aluminosilicate Glass Ceramic and Investigation of its Properties

OBTAINING OF ALKALINE-FREE ALUMINOSILICATE GLASS CERAMICS BY SOL-GEL METHOD AND INVESTIGANING OF ITS PROPERTIES

Preparation of monolithic transparent mullite-based glass-ceramics by the sol–gel method

Low-temperature synthesis of ultrafine Cr,Mg-codoped Al2TiO5 nanocrystals as high-temperature green ceramic pigment

Crystallization behavior and properties of cordierite synthesized by sol-gel technique and hydrothermal treatment

Influence of Y2O3 Concentration on the Optical Properties of Multicomponent Glasses and Glass–Ceramics

Effective Synthesis of Green Nano‐sized Ceramic Pigments by Co‐doping Zn2+, Cr3+ and Sm3+ into the Cobalt‐aluminate

Synthesis and thermal stability of zirconia and yttria-stabilized zirconia microspheres

A comparison of syntheses approaches towards functional polycrystalline silicate ceramics

Preparation and Thermal Stability of Zirconia-Doped Mullite Fibers Via Sol-Gel Method

Preparation and Crystallization of Si-Al Gel

Development of Red Ceramic Pigments with Perovskite Structure Prepared through a Traditional Route

The Influence of Gel Preparation and Thermal Treatment on the Optical Properties of SiO2-ZnO Powders Obtained by Sol–Gel Method

Preparation and characterization of inverse spinel green nano-ceramic pigment