Abstract:Due to the growing electric vehicle market and new trends to reduce fuel consumption for a healthy environment, safe and reliable vehicles are desirable for reasons beyond EV and new technology. Although certain safety standards and legislation are in place and continuously improving but several concerns including battery safety, battery performance, vehicle structure, and battery design to be considered as these affect the overall reliability of Electric vehicles (EVs). Lithium-ion battery technology is considered a good solution to power electric vehicles but potential overheating due to stressful conditions such as mechanical abuse, overcharge, over-discharge, short circuit, and excessive heat from external environment gives rise to safety issues and the occurrence of one or more than one of these can lead to thermal runaway. In most cases, an electric short circuit is a necessary but not sufficient condition for the occurrence of thermal runaway after mechanical abuse. Chemistry of the cell, the resistance of separator to heat, size of the fractured part, and rate of heat transfer all play a role in processes leading to a thermal runaway, if the cell has not gone to thermal runaway right away it can still go into a slow process of electrochemical reaction, releasing gases that eventually could lead to a catastrophic event. This abstract investigates the mechanical behaviour of the separator in the LiCoO2/Graphite cylindrical 18650 cells. Internal short circuit (ISC) behaviour, strain rate dependency, and electrochemical status of the cells (i.e. SOC dependency) are studied to understand failure patterns. Furthermore, a simple and effective constitutive model for the separator layer is formed, facilitating further mechanical analysis and numerical simulation of lithium-ion battery study. The occurrence of ISC is investigated by jellyroll deformation where the casing is removed, and quasi-static load is applied. The numerical simulation model is developed to further investigate sequential structural failures and temperature changes. Simulation results showed good accuracy with experimental results and are useful to predict structural failure of cells. The number of failures including electrolyte leakage, change in shape, sudden voltage drop/temperature rise, and gas venting are observed.

Performance of Protection Devices Integrated into Lithium-Ion Cells during Overcharge Abuse Test

Investigation of the Effect of Safety Function Failure in Lithium-Ion Battery Systems at High Overvoltage

Abuse by External Heating, Overcharge and Short Circuiting of Commercial Lithium-Ion Battery Cells

Analysis of Internal Short Circuit and Thermal Runaway of Li-Ion Battery Due to Mechanical Abuse

Enhanced hazard characterization of lithium-ion batteries subject to destructive overcharge conditions

Comparison of the Overcharge Behaviors of Lithium-ion Batteries under Different Test Conditions

Comprehensive Investigation of a Slight Overcharge on Degradation and Thermal Runaway Behavior of Lithium-Ion Batteries

Research on Overcharge and Overdischarge Effect on Lithium-Ion Batteries

Overcharge Behavior and Early Warning Analysis of LiNi0.5Co0.2Mn0.3O2/C Lithium-Ion Battery with High Capacity

Thermal Safety Study of Li‐ion Batteries under Limited Overcharge Abuse Based on Coupled Electrochemical‐thermal Model

Study on Thermal Safety of the Overcharged Lithium-Ion Battery

Experimental measurement and modeling of the internal pressure in cylindrical lithium-ion battery cells under abuse conditions

Progress of overcharge performance improvement for Li-ion batteries

Degradation and safety performance of lithium-ion cells under high-rate charging/discharging scenarios

Li-Ion Cell Safety Monitoring Using Mechanical Parameters: Part II. Battery Behavior during Thermal Abuse Tests

Safety Performance and Failure Criteria of Lithium-Ion Batteries under Mechanical Abuse

Conductive Polymer for Reversible Overcharge Protection in Lithium-Ion Batteries

Comprehensive Battery Safety Risk Evaluation: Aged Cells versus Fresh Cells Upon Mechanical Abusive Loadings

Investigations of Mechanical Properties and Maximum Load Capacities under Abuse Testing of Lithium Ion Battery

On Safety of Swelled Commercial Lithium-Ion Batteries: A Study on Aging and Abuse Tests

Thermal behavior and failure mechanisms of 18650 lithium ion battery induced by overcharging cycling