Abstract:In recent years, the demand for lithium-ion batteries (LIBs) has been increasing rapidly. Conventional recycling strategies (based on pyro- and hydrometallurgy) are damaging for the environment and more sustainable methods need to be developed. Bioleaching is a promising environmentally friendly approach that uses microorganisms to solubilize metals. However, a bioleaching-based technology has not yet been applied to recover valuable metals from waste LIBs on an industrial scale. A series of experiments was performed to improve metal recovery rates from an active cathode material (LiCoO 2 ; LCO). (i) Direct bioleaching of ≤0.5 % LCO with two prokaryotic acidophilic consortia achieved >80 % Co and 90 % Li extraction. Significantly lower metal recovery rates were obtained at 30 °C than at 45 °C. (ii) In contrast, during direct bioleaching of 3 % LCO with consortia adapted to elevated LCO levels, the 30 °C consortium performed significantly better than the 45 °C consortium, solubilizing 73 and 93 % of the Co and Li, respectively, during one-step bioleaching, and 83 and 99 % of the Co and Li, respectively, during a two-step process. (iii) The adapted 30°C consortium was used for indirect leaching in a low-waste closed-loop system (with 10 % LCO). The process involved generation of sulfuric acid in an acid-generating bioreactor (AGB), 2–3 week leaching of LCO with the biogenic acid (pH 0.9), selective precipitation of Co as hydroxide, and recirculation of the metal-free liquor back into the AGB. In total, 58.2 % Co and 100 % Li were solubilized in seven phases, and >99.9 % of the dissolved Co was recovered after each phase as a high-purity Co hydroxide. Additionally, Co nanoparticles were generated from the obtained Co-rich leachates, using Desulfovibrio alaskensis , and Co electrowinning was optimized as an alternative recovery technique, yielding high recovery rates (91.1 and 73.6% on carbon felt and roughened steel, respectively) from bioleachates that contained significantly lower Co concentrations than industrial hydrometallurgical liquors. The closed-loop system was highly dominated by the mixotrophic archaeon Ferroplasma and sulfur-oxidizing bacteria Acidithiobacillus caldus and Acidithiobacillus thiooxidans . The developed system achieved high metal recovery rates and provided high-purity solid products suitable for a battery supply chain, while minimizing waste production and the inhibitory effects of elevated concentrations of dissolved metals on the leaching prokaryotes. The system is suitable for scale-up applications and has the potential to be adapted to different battery chemistries.

Application of the surface engineered recombinant Escherichia coli to the industrial battery waste solution for lithium recovery

Removal of impurity metals as phosphates from Lithium-ion battery leachates

Surface engineered recombinant Escherichia coli for the potential application of the cobalt contaminated wastewater treatment and the photocatalytic dye degradation

Electrochemical recovery lithium from brine via taming surface wettability of regeneration spent batteries cathode materials

Recovery of Lithium from Wastewater Using Development of Li Ion-Imprinted Polymers

A novel process for multi-stage continuous selective leaching of lithium from industrial-grade complicated lithium-ion battery waste

Recovery of metal ion resources from waste lithium batteries by in situ electro-leaching coupled with electrochemically switched ion exchange

A novel closed-loop biotechnology for recovery of cobalt from a lithium-ion battery active cathode material

Lithium-Ion Battery Recycling: Metal Recovery from Electrolyte and Cathode Materials by Electrodialysis

Cobalt Electrochemical Recovery from Lithium Cobalt Oxides in Deep Eutectic Choline Chloride+Urea Solvents

Three-chamber electrochemical reactor for selective lithium extraction from brine.

Valorization of battery manufacturing wastewater: Recovery of high-value metal ions through reaction-enhanced membrane cascade

A reusable deep eutectic solvent for the regeneration of Li and Co metals from spent lithium-ion batteries

Interfacial processing engineering of co-grinding agent for recycling of spent lithium-ion batteries

Recovery of lithium from the effluent obtained in the process of spent lithium-ion batteries recycling

Electrochemical lithium extraction from aqueous sources

Selective Lithium separation from Li/Co/Ni mixtures using optimized flow-electrode capacitive deionization

Application of Electrodialysis for the Selective Lithium Extraction Towards Cobalt, Nickel and Manganese from Leach Solutions Containing High Divalent Cations/Li Ratio

Biotreatment for the spent lithium-ion battery in a three-module integrated microbial-fuel-cell recycling system

Recovery of Lithium from Industrial Li-Containing Wastewater Using Fluidized-Bed Homogeneous Granulation Technology

Display of lead‐binding proteins on Escherichia coli surface for lead bioremediation