Abstract:The functional devices made by NiTi shape memory alloys (SMAs) are often serviced in hydrogen (H)-rich environment. Recently experimental results showed that the martensite transformation (MT) of NiTi SMA changed strongly after charging H, which originates from the H diffusion in the material and an additional transformation resistance caused by the absorbed H atoms. In this work, a multi-scale diffusional-mechanically coupled constitutive model is constructed to describe the super-elastic deformation of NiTi SMA wires in H-rich environment. In the grain scale, a crystal plasticity-based constitutive model is developed within the framework of irreversible thermodynamics. Four deformation mechanisms, i.e., elasticity, MT, transformation-induced plasticity (TRIP) and H expansion are taken into account. Since the H atoms can be trapped by the lattice defects, the total H concentration is further decomposed into two parts, i.e., the lattice hydrogen concentration and the trapped one. The generalized thermodynamic forces of MT and TRIP are derived from the Gibbs free energy and Clausius-Duhem inequality. The evolution of H concentration field is derived by combining the chemical potential, diffusion balance equation and the Fick's law. In the polycrystalline aggregate scale, in order to measure the interaction among the grains and obtain the overall response of the polycrystalline aggregate, a diffusional-mechanically coupled self-consistent homogenization method is developed. Meanwhile, the finite volume method is employed to calculate the H concentration in each grain. An assumption of uniform stress field in the macroscopic scale is adopted to achieve the scale transition from the polycrystalline aggregate to the whole wire. To validate the prediction capability of the proposed model, the predictions are compared with the experiments. Moreover, the influences of loading rate on the deformation of the wires in the process of in-situ charging H are predicted and discussed.

Multi-doping effect on the martensitic transformation behavior of shape memory alloys

A Phenomenological Model for Thermally-Induced Hysteresis in Polycrystalline Shape Memory Alloys with Internal Loops

Stabilization of deformed stress-induced martensite and its effect on shape memory effect in an Fe-Mn-Si-Ni-Co alloy

Doping Effects of Point Defects in Shape Memory Alloys

Enhancing the Thermal Stability and Recoverability of ZrCu-based Shape Memory Alloys Via Interstitial Doping

Stress-induced detwinning/reorientation of hierarchically twinned martensite and deformation micro-mechanism in Ni52Mn27Ga17Co4 shape memory alloys: Experimental and phase-field studies

Three-dimensional, Non-Isothermal Phase-Field Modeling of Thermally and Stress-Induced Martensitic Transformations in Shape Memory Alloys

A three-dimensional constitutive model for the martensitic transformation in polycrystalline shape memory alloys under large deformation

A Temperature-Dependent Model of Shape Memory Alloys Considering Tensile-Compressive Asymmetry and the Ratcheting Effect.

A Tensile-Compressive Asymmetry Model for Shape Memory Alloys with a Redefined Martensite Internal Variable

One-dimensional modeling of stress-induced transformation behaviour of shape memory alloy

A novel two-stage martensitic transformation induced by nanoscale concentration modulation in a TiNb-based shape memory alloy

Martensite transformation, mechanical properties and shape memory effects of Ni-Mn-In-Mg shape memory alloys

A multi-scale diffusional-mechanically coupled model for super-elastic NiTi shape memory alloy wires in hydrogen-rich environment

Design of Compositionally Modulated Materials for Controlled Strain Release During Deformation Through Phase-Field Simulations

A Hybrid Elements Model of Stress-Strain Hysteresis in Shape Memory Alloys

Effects of grain refinement on the microstructures and damping behaviors of a Cu–Al–Ni–Mn–Ti shape memory alloy

Modeling and Simulation of Irradiation Effects on Martensitic Transformations in Shape Memory Alloys

A new variable speed phase transformation constitutive model of shape memory alloys

Effect of Martensitic Structure on the Magnetic Field Controlled Damping Effect in a Ni–Fe–Mn–Ga Ferromagnetic Shape Memory Alloy

Isothermal Martensitic Transformation in Ti-Ni-Cu-Co Shape Memory Alloy: Insight from a Thermally Activated Kinetic Model