Abstract:In the present paper, for the first time, an attempt has been made to obtain the solution for bending and stress under the thermal environment using Galerkin Vlasov's method. A non-polynomial based higher-order shear deformation theory with inverse tangent hyperbolic shape function is used to define the displacement field. The formulation is performed for the author's recently developed sandwich plate using a new modified sigmoid function-based functionally graded material (S-FGM) plate of different symmetric and non-symmetric configurations. Using a one-dimensional steady-state heat conduction equation, a new temperature distribution through the thickness based on modified sigmoid law is proposed. Three different types of porosity are considered viz. even, uneven but symmetric and uneven but non-symmetric. A new uneven non-symmetric porosity model is used in which micro-voids are varied in accordance with material property variation in the thickness direction in order to capture the accurate distribution of voids on the plate. The principle of virtual work is employed to derive equilibrium equations. An exact solution is obtained using the assumed solution with shape functions satisfying the edge boundary conditions. From the present study on static analysis, it is deduced that more refined and accurate results for plate in thermal environment, it is necessary to include the thermal effect on the stiffness of the plate in addition to the initial deflection of the plate. The effect of boundary conditions on stress and deflection distribution along the surface of the porous plate is studied, and it is observed that the distribution is prominently affected by the type of symmetric or asymmetric boundary conditions. The considerable increase in deflection and stress can be seen for even porosity distribution (P-1) in comparison to uneven symmetric (P-2) or uneven non-symmetric (P-3) porosity distribution. In addition, the maximum transverse shear stresses are offset more from the center of the sandwich plate with an increase in temperature differences with a maximum offset at ΔT = 300 K and minimum offset at ΔT = 0 K. Different examples are considered to check the accuracy and validation of the present formulation. The calculated outcomes and interpretations can be useful as a validation study for the imminent investigation of sandwich S-FGM plates having porosities in the thermal environment.

Thermal stress estimation of a constrained metallic plate using symmetric and antisymmetric lamb wave group velocities

Novel Semi-Analytical Solutions For The Transient Behaviors Of Functionally Graded Material Plates In The Thermal Environment

The Thermal and Pasternak Foundation Effect on the Transient Behaviors of the Rectangular Plate Using a Novel Semi-Analytical Method

Determining the Elastic Constants of Isotropic Materials by Measuring the Phase Velocities of the A0 and S0 Modes of Lamb Waves

Local Stress Measurement in Thin Aluminum Plates based on Zero-Group-Velocity Lamb mode

Thermo-mechanical analysis of porous sandwich S-FGM plate for different boundary conditions using Galerkin Vlasov's method: A semi-analytical approach

Assessment of early fatigue in solid plates using quasi-static component by Lamb wave propagation under group velocity matching

Investigating the thermally induced acoustoelastic effect in isotropic media with Lamb waves.

Thermoelastic Excitation of Transient Lamb Wave in an Orthotropic Thin Plate

Thermal buckling and vibration analysis of cold-formed steel sections

Acoustoelastic characterization of plates using zero group velocity Lamb modes

Modified state space method for long-term behavior of viscoelastic laminated angle-ply plate

Modal displacement analyses of Lamb waves in micro/nano-plates based on the consistent couple stress theory

Thermal deflection and thermal stresses in a thin circular plate under an axisymmetric heat source

Experimental and Theoretical Analyses on Laser-Generated Transient Lamb Waves in an Orthotropic Plate

A general analytical approach to the thermoelastic analysis of asymmetric anisotropic nanoplate with polygonal holes

The dynamic bending analysis of plates under thermal load using an efficient wave-based method

Nonlinear Guided Wave Tomography for Detection and Evaluation of Early-Life Material Degradation in Plates

Modified state space method for bending creep and recovery behaviors of viscoelastic orthotropic laminated plate

Hamiltonian system-based analytic thermal buckling solutions of orthotropic rectangular plates

Blind inversion method using Lamb waves for the complete elastic property characterization of anisotropic plates