Abstract:Lithium-ion (Li-ion) cells are the optimal choice of energy storage for battery electric vehicles. As the Li-ion cells must operate in a temperature range of 15–45 °C for optimal performance and life, thermal control of the cells is paramount. The study uses infrared imaging to investigate the temperature dynamics of two lithium-ion pouch cells with two energy capacities, 60 Ah and 20 Ah under different operational scenarios with natural convection. Experimental analysis conducted at ambient temperatures of 27 °C, 35 °C, and 40 °C reveals the necessity of cooling for the 20 Ah cell at temperatures exceeding 40 °C and C-rates beyond 1C. Similarly, thermal management is recommended for the 60 Ah cell at ambient temperatures of 35 °C and above, as temperatures surpass the 45 °C desirable threshold during charging and discharging rates of 1C and higher. Further studies are concentrated on the 60 Ah cell due to its increased cooling demands in comparison to the 20 Ah cell. The 60 Ah cell is modelled using NTGK and ECM electrochemical models and validated against experimental data, showing a good agreement within ±10% between both models and the experimental study. Finally, numerical simulations explain the efficacy of localized cooling with forced convection of liquid and performance metrics are introduced to evaluate the cooling efficiency of design configurations. Based on performance metrics, the T-shaped cold plate design, with an inlet coolant temperature of 30 °C, achieved the highest performance index of 1.13. This design notably decreased the maximum temperature and maximum temperature difference by 41.8% and 31.8%, respectively, compared to natural convection. This improvement is observed during the discharge of 60 Ah cell at 2C in a 40 °C environment, where the cell demands substantial cooling measures. Therefore, implementing localized cooling for the cell demonstrates its effectiveness in regulating temperature increase, leading to a significant decrease in the infrastructure requirements and weight of the thermal management system.

Simulation Study on the Effect of Operating and Materials Parameters on Electrocaloric Device for Battery Cooling

P(VDF-TrFE-CFE) polymer based electrocaloric device design for battery cooling

Electromagnetic-driven Electrocaloric Cooling Device Based on Ternary Ferroelectric Composites

Numerical Evaluation of Cooling Technology for Preventing Thermal Runaway in Batteries

Thermal characterization of pouch cell using infrared thermography and electrochemical modelling for the Design of Effective Battery Thermal Management System

Experimental studies and comprehensive computational investigations on composites-based phase change material for battery thermal management systems in electric vehicles

Efficient Thermoelectric Cooler for Localized Cooling in Electronic Devices

Enhancing Thermal Performance and Cooling Solutions of Phase Change Material in Battery Thermal Management System: A Computational Analysis

Experiments and Simulation on the Performance of a Liquid-Cooling Thermal Management System including Composite Silica Gel and Mini-Channel Cold Plates for a Battery Module

Thermal management analysis of new liquid cooling of a battery system based on phase change material and thermoelectric cooler

Compact Cooling Devices Based on Giant Electrocaloric Effect Dielectrics

Parametric investigation on the performance of a direct evaporation cooling battery thermal management system

Numerical investigation of the effect of prepared phase change material-expanded graphite composite and vertical air ducts on the thermal performance of a Li-ion battery

Highly Efficient Electrocaloric Device Based on Composite Materials with Excellent Heat Transfer Performance

Thermo-electrochemical Simulation of the Cooling Process in a Compact Battery Pack Considering Various Configurations

Numerical Investigation of the Thermal Performance of a Hybrid Phase Change Material and Forced Air Cooling System for a Three-Cell Lithium-Ion Battery Module

An equivalent circuit model for battery thermal management system using phase change material and liquid cooling coupling

Cooling Effectiveness Enhancement of Parallel Air-Cooled Battery System Through Integration with Multi-Phase Change Materials

Concept Design And Numerical Evaluation Of A Highly Efficient Rotary Electrocaloric Refrigeration Device

Numerical investigation on the effect of PCM thickness and nano-additive on the cooling performance of Stearic Acid based battery thermal management system

An Electrocaloric Device Demonstrator for Solid-State Cooling