Effect of ferrite-austenite morphology and orientation relationship on bainite transformation in low-alloy TRIP steels
Tongliang Wang,Lihe Qian,Wenlu Yu,Kaifang Li,Fucheng Zhang,Jiangying Meng
DOI: https://doi.org/10.1016/j.matchar.2021.111656
IF: 4.537
2022-01-01
Materials Characterization
Abstract:To reveal the effects of large amounts of ferrite on bainite transformation behavior, the morphological and orientation relationship between ferrite (alpha) and austenite (gamma) reversed from different initial microstructures during intercritical annealing, as well as their effects on subsequent bainite transformation, were investigated by scanning electron microscopy, electron-backscattered diffraction, and dilatometry analysis. The austenite and ferrite reversed from quenched martensite exhibited an alternately arranged lamellar structure. The austenite maintained a Kurdjumov-Sachs (K-S) orientation relationship with ferrite. In the subsequent austempering, bainitic transformation exhibited a strong variant selection phenomenon. Austenite reversed from cold-deformed martensite was dispersed around ferrite, and the orientation relationship between austenite and ferrite was irrational. During austempering, the bainite nucleation rate at K-S-oriented alpha/gamma interfaces was much higher than that at irrational-oriented alpha/gamma interfaces. First, the alternately arranged ferrite and austenite lamellae increased the total length of alpha/gamma interfaces per unit area, i.e., alpha/gamma interfacial density, for bainite nucleation. Second, the activation energy for bainite nucleation at the K-S-oriented alpha/gamma interface was lower. The K-S-oriented alpha/gamma interfaces facilitated bainite nucleation accompanied by strong variant selection, thereby accelerating the kinetics of bainite transformation.