Abstract:Aiming at the problem of large deformation and instability control of narrow coal pillar in the vertical stratification section of extra-thick coal seam, the stability and control technology of the surrounding rock of narrow coal pillar in extra-thick coal seam are studied by combining theoretical analysis, numerical simulation and field test. Based on the calculation of the triaxial stress in the narrow coal pillar, the yield criterion of the plane strain of the narrow coal pillar is obtained based on the Mohr-Coulomb failure strength, the failure characteristics and the evolution law of the damage degree of the narrow coal pillar are qualitatively analyzed, and the instability mechanism and size effect of the narrow coal pillar are further analyzed. Finally, the key technologies of surrounding rock control of the narrow coal pillar are given. It is verified by numerical simulation and field test. The research results show that ① The damage degree of the middle part of the narrow coal pillar is greater than that of the two sides, and the damage degree of the middle part from the top to the bottom develops from serious to slight. With the increase of width-height ratio, the damage degree and the proportion of serious damage area in the narrow coal pillar gradually decrease. When the width-height ratio is greater than 1∶1, a large range of slight damage area begins to appear in the middle and lower part of the narrow coal pillar. When the width-height ratio is greater than 5∶3, the proportion of slight damage area exceeds 50%. When C≥3 MPa, or φ≥20°, the damage degree of the two sides of the narrow coal pillar becomes slight. ② The side of the mining roadway in the working face is a low-stress bearing area of the narrow coal pillar. Under the action of high stress in the upper part, the coal body in the large-scale low-stress bearing area moves to the roadway, resulting in a continuous large deformation of the two sides, which in turn affects the stability of the roof. The height of coal pillar is the main controlling factor for the stability of the narrow coal pillar in the middle and bottom layered sections. The increase of width-height ratio of the narrow coal pillar has little influence on the bearing strength of high strength bearing area, while the bearing strength of low strength bearing area increases obviously. Reasonable width-height ratio of the narrow coal pillar can balance the proportion of high and low strength bearing area in coal pillar. ③ The stability of surrounding rock should be considered in the design of layered narrow coal pillars when both sides of the working face are mined out, so as to ensure that the range of high-strength bearing area inside the coal pillar is greater than half of the width and height of the coal pillar. Through the joint strengthening support measures, multiple joint control areas from shallow to deep are formed in the coal pillar to jointly maintain the self-stability of the coal pillar.

Coal pillar safety and surface deformation characteristics of wide strip pillar mining in deep mine

A study of surface subsidence and coal pillar safety for strip mining in a deep mine

Surface Movement and Deformation Characteristics Due to High-Intensive Coal Mining in the Windy and Sandy Region

Pressure Relief and Bolt Grouting Reinforcement and Width Optimization of Narrow Coal Pillar for Goaf-Side Entry Driving in Deep Thick Coal Seam: A Case Study

Stability and Control of Surrounding Rock of Narrow Coal Pillar in Vertical Stratification of Extra-Thick Coal Seam

Study on Characteristics of Front Abutment Pressure and Rational Stop-Mining Coal Pillar Width in Large Height Working Face

Breaking law of overburden rock and key mining technology for narrow coal pillar working face in isolated island

Characterizing Coal Pillar Deformation and Air Leakage Pattern During Longwall Face Mining

Study on the instability mechanism and control technology of narrow coal pillar in double-roadway layout of Changping mine

Research on Stress Change and Deformation Monitoring of Coal Pillar Between Two Longwall Coal Faces

Multiscale study on coal pillar strength and rational size under variable width working face

Numerical Study of Failure Mechanisms and Control Techniques for a Gob-Side Yield Pillar in the Sijiazhuang Coal Mine, China

Stability analysis of 'roof-coal pillar' structure in longwall multi-section mining of steeply dipping coal seam

Study on Ultimate Strength and Dip Effect of Coal Pillar in Steeply Dipping Coal Seam

Effect of super-high water materials backfilling on stress decrease and energy release during strip coal pillar mining: A case study

Study on Coal Pillar Setting and Stability in Downward Mining Section of Close Distance Coal Seam

Numerical Simulation Study on The Effect of Isolated Coal Pillar Width on The Subsidence Law of Deep Mining

Study on the Coal Pillar Weakening Technology in Close Distance Multi-Coal Seam Goaf

Coal Pillar Size Determination and Surrounding Rock Control for Gob-Side Entry Driving in Deep Soft Coal Seams

Study on surrounding rock failure mechanism and rational coal pillar width of the gob‐side coal roadway under influence of intense dynamic pressure

Study on small coal pillar in gob-side entry driving and control technology of the surrounding rock in a high-stress roadway