An Innovative Methodology in Narrow Gap GTAW for Alternating Magnetic Field with Synchronous Swing of Filler Wire and Arc
Qi Sun,Yibo Liu,Huisheng Ren,Chengyin Liu,Qinghua Zhang,Xiaojun Tang,Xinjun Qian,Qingjie Sun
DOI: https://doi.org/10.1007/s00170-024-13968-z
2024-01-01
Abstract:An innovative methodology has been developed to control energy distribution, fluid behavior of the molten pool, and fusion at the sidewall during the process of Gas tungsten arc welding (GTAW) process in a narrow gap with an alternating magnetic field by synchronizing the swing of the filler wire and arc. Utilizing a high-speed camera, we observed that the swinging filler wire ensured a stable transition zone between the molten material and the sidewall, effectively mitigating poor wetting and lack-of-fusion defects along the sidewalls. The synchronized swing of the filler wire and arc significantly enhanced the flow of the molten pool. Increasing the speed of the filler wire swing intensified the erosion caused by the molten pool on the sidewall, thus preventing the occurrence of a lack-of-fusion defect on the sidewall. This occurs because the proximity of the filler metal to the sidewall allows for an adequate accumulation of liquid metal, which, using the heat from the molten pool, induces melting at the sidewall, subsequently resulting in the formation of a concave liquid surface. Moreover, the combined effects of arc pressure, arc shear stress, surface tension, and the momentum provided by the swinging wire caused the molten weld pool to flow toward the sidewall.