Abstract:In many industrial applications, heat loads management requires the design and production of compact heat exchangers which are expected to handle high thermal loads with acceptable pressure losses, while assuring good mechanical performances. These challenging targets can be achieved by filling the cavities where the cool/hot fluid circulates with lattice structures promoting the heat exchange between the fluid and the cavity boundaries. Such lattice structures can be only produced through Additive Manufacturing due to their high geometric complexity. Recent experimental investigations proved the effectiveness of some kinds of lattice structures having a circular cross section. Here the aerothermal behaviour of Body-Centred Cubic (BCC) lattice stagger arrays in a rectangular channel was experimentally investigated by considerably extending the previous studies to higher Reynolds numbers (up to 30′000) and to new types of lattice structures. Specifically, three new BCC structures having a cam-like, drop-like and elliptical cross section were explored in this work and compared against those having circular cross section. All the samples were manufactured by means of Laser Powder Bed Fusion and made from AlSi10Mg. At first, the heat exchangers were comprehensively characterized by means of optical non-destructive methods. Successively they were tested in a dedicated rig by imposing constant heat flux boundary conditions. The characteristics of the transitional or fully turbulent approaching flow to the test section are also reported thanks to dedicated flow field measurements performed by Particle Image Velocimetry. According to the obtained results, the BCC structure with the circular cross section of larger diameter is the most effective in terms of heat transfer, although it is largely penalized by the pressure losses. Similar heat transfer performances were achieved by the tapered cross section of elliptical shape with the advantage of a considerably lower friction factor. Pressure losses resulted almost identical for all the tapered cross sections but lower than those of the circular one having an equal frontal dimension. When considering the thermal performance factor the circular shape becomes unfavourable for Re >20′000, while the elliptical cross section is the best choice to efficiently promote heat transfer up to Re =30′000.

An Experimental Study on the Dependency of Thermal Resistance of Additively Manufactured Micro-Channel Heat Sinks on Channel Cross-Sections

Numerical simulation of cooling performance in microchannel heat sinks made of AlN ceramics

Comparison of the Effect of Five Different Entrance Channel Shapes of a Micro-Channel Heat Sink in Forced Convection with Application to Cooling a Supercomputer Circuit Board

Thermal and hydraulic performance of Al alloy-based 3D printed triangular microchannel heatsink governed by rough walls with graphene and alumina nanofluids as working liquid

Effect of a micro heat sink geometric design on thermo-hydraulic performance: A review

Heat transfer and pressure drop analysis of a microchannel heat sink using nanofluids for energy applications

A COMPREHENSIVE STUDY ON THE THERMAL CONDUCTIVITY OF HIGH-EFFICIENCY ALUMINUM POROUS MICROCHANNELS

Numerical Study on Heat Transfer Efficiency and Inter-Layer Stress of Microchannel Heat Sinks with Different Geometries

Numerical Study Of Double-Layered Microchannel Heat Sinks With Different Cross-Sectional Shapes

Experimental investigation on additive manufactured single and curved double layered microchannel heat sink with nanofluids

Experimental and Numerical Investigation of Thermal Performance of S-shaped Manifold Microchannel Heat Sinks

Additive Manufacturing of Liquid-cooled Ceramic Heat Sinks: An Experimental and Numerical Study

Arc-curved microchannels engraved on segmented circular heat sink for heat transfer augmentation; ANN-based performance optimization

Numerical analysis on thermal-hydraulic performance of optimized microchannel heat sink with slant ribs and quatrefoil rib-elliptical groove complex structures

An additively manufactured manifold-microchannel heat sink for high-heat flux cooling

Experimental Investigation of Heat Transfer Performance for a Novel Microchannel Heat Sink

Effects of different cross-sections of Body Centered Cubic cells on pressure drop and heat transfer of additively manufactured heat sinks

Heat Transfer Performance and Structural Optimization of a Novel Micro-channel Heat Sink

Experimental study of embedded manifold staggered pin-fin microchannel heat sink

Numerical Study on Temperature Uniformity in a Novel Mini-Channel Heat Sink with Different Flow Field Configurations

Experimental and Numerical Investigation of a Microchannel Heat Sink (MCHS) with Micro-Scale Ribs and Grooves for Chip Cooling