Abstract:Dyes are widely used in various industries, and the industrial use of dyes has increased steadily over the past few decades. However, it is difficult to remove these dyes from effluents by using conventional wastewater treatment processes owing to their chemical and physical stability. Herein, we propose the possibility of using disulfide-linked polymer (DiS-COP) as an effective adsorbent for selectively removing cationic dyes. The selective adsorption ability of DiS-COP was tested using two cationic dyes, namely methylene blue (MB) and crystal violet (CV), and two anionic dyes, namely methyl orange (MO) and orange G (OG). The adsorption equilibrium is reached in less than 4 h for all dyes with extremely fast removal for CV. The kinetic results were analyzed using the pseudo-first-order, pseudo-second-order, and intraparticle diffusion model. The maximum adsorption capacity for cationic dyes, as obtained using the Langmuir isotherm, was considerably higher than that for anionic dyes. DiS-COP exhibited 10 (Qm,MB 211 mg/g) and 56 times (Qm,CV 1181 mg/g) higher maximum adsorption capacities for MB and CV, respectively, than that for the anionic dye MO (Qm,MO 21 mg/g). Selective adsorption of cationic dyes in the binary system was successfully realized. The results of the pH effect experiment revealed the selective adsorption mechanism. The electrostatic interaction between negatively charged DiS-COP and charged dye molecules induced the selective attraction of cationic dyes. Moreover, the effect of π-π stacking between DiS-COP and the dye molecules, as well as that between the adsorbed dye molecules and the free dye molecules in the solution, facilitated the dye adsorption. The removal mechanism was further elucidated using Fourier transform infrared spectrometry and X-ray photoelectron spectroscopy. In addition, the results of the adsorption experiments involving the selected pharmaceuticals indicated that DiS-COP was able to remove these cationic pharmaceuticals to a significantly greater extent than it was able to remove the those anonic and neutrally charged pharmaceuticals. The DiS-COP used in this study, which can be easily prepared via a one-pot reaction, has the potential for use as an adsorbent to selectively remove cationic organic pollutants.

A Carboxylic-Functionalized Anderson-Type Polyoxoanion for Efficient Selective Cationic Dye Adsorption

Rapid and selective adsorption capacity towards cationic dye with an anionic functionalized Anderson-type polyoxometalate

Polyoxometalates-based Heterometallic Organic-Inorganic Hybrid Materials for Rapid Adsorption and Selective Separation of Methylene Blue from Aqueous Solutions.

Two Anderson-type polyoxometalate-based metal–organic complexes with a flexible bis(pyrazine)-bis(amide) ligand for rapid adsorption and selective separation of cationic dyes

In situ formation of 4-cyanopyridinecarboxylic acid and its polyacid doping coordination polymer for adsorption of organic dyes in wastewater

Easy-fabrication and low-cost carbamate-based porous organic polymers for efficient removal of methylene blue

Selective adsorption performance of H6P2Mo15W3O62-based Cu3(BTC)2 composite in treatment of simulated cationic dye wastewater

Carboxylate-functionalized hollow polymer particles modified polyurethane foam for facile and selective removal of cationic dye

Ultra-high Uptake and Selective Adsorption of Organic Dyes with a Novel Polyoxomolybdate-Based Organic–inorganic Hybrid Compound

Functional Porous Organic Polymers with Conjugated Triaryl Triazine As the Core for Superfast Adsorption Removal of Organic Dyes

Carboxyl-functionalized porous aromatic framework for rapid, selective and efficient removal of cationic pollutants from water

Fe3O4@C@polyaniline trilaminar core–shell composite microspheres as separable adsorbent for organic dye

Innovative Benign-to-design Functionalized Adsorbents from Biomass for Rapid Azo-Dyes Separation

Non-porous covalent organic polymers enable ultrafast removal of cationic dyes via carbonyl/hydroxyl-synergetic electrostatic adsorption

Selective removal of cationic organic pollutants using disulfide-linked polymer

Designed Construction of 2D Honeycomb Cationic MOF Materials for Selective Removal of Sulfonic Anionic Dyes

Rapid, Massive, and Green Synthesis of Polyoxometalate-Based Metal–Organic Frameworks to Fabricate POMOF/PAN Nanofiber Membranes for Selective Filtration of Cationic Dyes

High adsorption capacities for dyes by a pH-responsive sodium alginate/sodium lignosulfonate/carboxylated chitosan/polyethyleneimine adsorbent

Selective and Efficient Adsorption of Anionic Dyes by Core/shell Magnetic MWCNTs Nano-Hybrid Constructed Through Facial Polydopamine Tailored Graft Polymerization: Insight of Adsorption Mechanism, Kinetic, Isotherm and Thermodynamic Study

A double-layered neutral cadmium-organic framework for selective adsorption of cationic organic dyes through electrostatic affinity

A novel hydroxyl-riched covalent organic framework as an advanced adsorbent for the adsorption of anionic azo dyes