Hybrid-Solvent Electrolytes for Enhanced Potassium-Oxygen Battery Performance

Chengyu Qiu,Jinyu Jiang,Xin Zhao,Shunqiang Chen,Xiaodi Ren,Yiying Wu

DOI: https://doi.org/10.1021/acsami.2c18875

2022-12-10

Abstract:ACS Appl Mater Interfaces . 2022 Dec 8. doi: 10.1021/acsami.2c18875. Online ahead of print. NO

materials science, multidisciplinary,nanoscience & nanotechnology

What problem does this paper attempt to address?

A Nonflammable Electrolyte Enabled High Performance K0.5MnO2 Cathode for Low-Cost Potassium-Ion Batteries

Leqing Deng,Tianshuai Wang,Youran Hong,Meiying Feng,Ruiting Wang,Juan Zhang,Qanfan Zhang,Jiangwei Wang,Liang Zeng,Yujie Zhu,Lin Guo

DOI: https://doi.org/10.1021/acsenergylett.0c00912

IF: 22

2020-01-01

ACS Energy Letters

Abstract:The application of a layered K0.5MnO2 cathode in potassium-ion batteries is limited by its poor cycling performance when charged above 4.0 V (vs K+/K), and the underlying mechanism for this electrochemical instability is still unclear. Here, it is discovered that ethylene carbonate (EC) will intercalate into the depotassiated K0.5MnO2, causing the exfoliation of the layered compound and the capacity decay under high charge cutoff voltage. When the carbonates are replaced with a nonflammable phosphate, the electrochemical performance of K0.5MnO2 above 4.0 V (vs K+/K) is significantly enhanced with a large reversible capacity (120 mAh g(-1)) and high capacity retention of 84% after 400 cycles. This phosphate-based electrolyte also demonstrates good compatibility with the commercial graphite anode, enabling the encouraging electrochemical performance of the K0.5MnO2 vertical bar graphite fullcell. The present study provides new insights on further exploration of other electrolytes to advance the emerging low-cost and high-performance potassium-ion batteries.
Adapting a Kinetics-Enhanced Carbon Nanostructure to Li/Na Hybrid Water-in-Salt Electrolyte for High-Energy Aqueous Supercapacitors

Cheng Long,Ling Miao,Dazhang Zhu,Hui Duan,Yaokang Lv,Liangchun Li,Mingxian Liu,Lihua Gan

DOI: https://doi.org/10.1021/acsaem.1c00566

IF: 6.4

2021-01-01

ACS Applied Energy Materials

Abstract:Wide-potential supercapacitor systems are highly anticipated to put aside the low-energy roadblock caused by the finite electrolysis voltage (1.23 V). However, poor electrolyte kinetics within the popular activated carbon electrodes usually downgrades the inherent high-power supply and long-cycle tolerance. To address this issue, multimodal porous carbon nanostructures are fabricated by the spontaneous cross-coupling between tetrachloro-1,4-benzoquinone (network joint) and four aromatic amines (chain motif) with varying bond dissociation energies, followed by temperature-programmed alkali thermolysis. The representative electrode with a broad ion-accessible platform (2539 m(2) g(-1)) stands out by virtue of substantial electrosorption spaces (<1 nm micropores) and multi-level pore highways nested in open macroporous voids, enabling an instant ion-transport kinetics response (0.40 Omega s(-0.5)) and remarkable rate capability (80.4% capacitance retention up to 20 A g(-1)) in the H2SO4 electrolyte. Moreover, a LiOTf/NaOTf hybrid water-in-salt electrolyte is developed here to shift the water-splitting potential, wherein double Li+/Na+ cations can weaken strong Coulombic interactions for low migration barrier and dense interface accumulation. Consequently, the upgraded symmetric device using such concentrated aqueous medium, displays a boosted energy capacity of 39.2 Wh kg(-1)@550 W kg(-1), an extraordinary power response of 22 kW kg(-1) under high-energy delivery up to 28.2 Wh kg(-1), and a durable service lifespan (85.5% energy retention over 10 000 successive cycles). This inspiring work provides structural insights for designing carbon electrodes adaptive to safe, wide-potential but kinetically sluggish electrolytes, realizing comprehensive energy-power improvements in supercapacitors.
Regulating the Solvation Structure of Potassium Ions Using a Multidentate Ether in Potassium Metal Batteries

Chao Chen,Ji Zhou,Wenbin Gong,Xueying Fan,Xiaodong Meng,Shang Chen,Longhua Sun,Yongqiang Meng,Kangjia Tao,Pingchuan Sun,Christopher W. Bielawski,Jianxin Geng,Burak Ülgüt

DOI: https://doi.org/10.1021/acsaem.2c01504

IF: 6.4

2022-08-19

ACS Applied Energy Materials

Abstract:Potassium (K) is regarded as an alternative to lithium (Li) for use in contemporary energy storage devices owing to its high abundance and low electrochemical potential. However, because K ions are larger than Li ions, they exhibit different solvation properties that can ultimately affect device performance. Herein, a multidentate ether-based electrolyte is demonstrated to effectively solvate K ions and the solvation structures can be further modulated with cosolvents. The use of the multidentate ether-based electrolyte also suppresses the formation of K dendrites and significantly enhances the cycling stability of K//K symmetric cells (e.g., over 2000 h at 0.25 mA cm–2).

materials science, multidisciplinary,chemistry, physical,energy & fuels
Highly‐solvating Electrolyte Enables Mechanically Stable and Inorganic‐rich Cathode Electrolyte Interphase for High‐performing Potassium‐ion Batteries

Shuoqing Zhao,Guohao Li,Bohan Zhang,Shipeng Zhang,Youxing Liu,Jinhui Zhou,Mingchuan Luo,Shaojun Guo

DOI: https://doi.org/10.1002/adma.202405184

IF: 29.4

2024-05-24

Advanced Materials

Abstract:Cathode–electrolyte interphase (CEI) is crucial for the reversibility of rechargeable batteries, yet receives less attention compared to solid–electrolyte interphase (SEI). The prevalent weakly‐solvating electrolyte is usually proposed from the standing point of obtaining robust SEI, however, the resultant weak ion‐solvent interaction gives rise to excessive free solvents and forms thick CEI with high kinetic barriers, which is disadvantageous for interfacial stability at the high working voltage. Herein, we report a highly‐solvating electrolyte to immobilize free solvents by generating stable ternary complexes and facilitate the growth of homogeneous and ultrathin CEI to boost the electrochemical performances of potassium‐ion batteries (PIBs). Through time‐of‐flight secondary ion mass spectrometry and cryogenic transmission electron microscopy, we reveal that the deliberately coordinated complexes are the key to forming mechanically stable and inorganic‐rich CEI with superior diffusion kinetics for high‐performing PIBs. Coupling with a K0.5MnO2 cathode and a soft carbon (SC) anode, we achieve a high energy density (202.3 Wh kg−1) with an exceptional cycle lifespan (92.5% capacity retention after 500 cycles) in a SC||K0.5MnO2 full cell, setting new performance benchmarks for PIBs. This article is protected by copyright. All rights reserved

materials science, multidisciplinary,chemistry, physical,physics, applied, condensed matter,nanoscience & nanotechnology
Restructuring Electrolyte Solvation by a Partially and Weakly Solvating Cosolvent toward High-Performance Potassium-Ion Batteries

Weijie Chen,Dianwei Zhang,Hongwei Fu,Jinfan Li,Xinzhi Yu,Jiang Zhou,Bingan Lu

DOI: https://doi.org/10.1021/acsnano.4c02108

IF: 17.1

2024-05-14

ACS Nano

Abstract:Ether-based electrolytes are among the most important electrolytes for potassium-ion batteries (PIBs) due to their low polarization voltage and notable compatibility with potassium metal. However, their development is hindered by the strong binding between K+ and ether solvents, leading to [K+-solvent] cointercalation on graphite anodes. Herein, we propose a partially and weakly solvating electrolyte (PWSE) wherein the local solvation environment of the conventional 1,2-dimethoxyethane (DME)-based electrolyte is efficiently reconfigured by a partially and weakly solvating diethoxy methane (DEM) cosolvent. For the PWSE in particular, DEM partially participates in the solvation shell and weakens the chelation between K+ and DME, facilitating desolvation and suppressing cointercalation behavior. Notably, the solvation structure of the DME-based electrolyte is transformed into a more cation-anion-cluster-dominated structure, consequently promoting thin and stable solid-electrolyte interphase (SEI) generation. Benefiting from optimized solvation and SEI generation, the PWSE enables a graphite electrode with reversible K+ (de)intercalation (for over 1000 cycles) and K with reversible plating/stripping (the K||Cu cell with an average Coulombic efficiency of 98.72% over 400 cycles) and dendrite-free properties (the K||K cell operates over 1800 h). We demonstrate that rational PWSE design provides an approach to tailoring electrolytes toward stable PIBs.
Nonfluorinated Antisolvents for Ultrastable Potassium-Ion Batteries

Jie Wen,Hongwei Fu,Dianwei Zhang,Xuemei Ma,Lichen Wu,Ling Fan,Xinzhi Yu,Jiang Zhou,Bingan Lu

DOI: https://doi.org/10.1021/acsnano.3c05165

IF: 17.1

2023-08-12

ACS Nano

Abstract:A robust interface between the electrode and electrolyte is essential for the long-term cyclability of potassium-ion batteries (PIBs). An effective strategy for achieving this objective is to enhance the formation of an anion-derived, robust, and stable solid-electrolyte interphase (SEI) via electrolyte structure engineering. Herein, inspired by the application of antisolvents in recrystallization, we propose a nonfluorinated antisolvent strategy to optimize the electrolyte solvation structure....

materials science, multidisciplinary,chemistry, physical,nanoscience & nanotechnology
High-efficiency Cathode Potassium Compensation and Interfacial Stability Improvement Enabled by Dipotassium Squarate for Potassium-Ion Batteries

Shuoqing Zhao,Zhichao Liu,Guanshun Xie,Ziqi Guo,Shuguang Wang,Jinhui Zhou,Xiuqiang Xie,Bing Sun,Shaojun Guo,Guoxiu Wang

DOI: https://doi.org/10.1039/d2ee00833e

IF: 32.5

2022-01-01

Energy & Environmental Science

Abstract:A low-cost and high-efficiency K2C4O4 is used as a potassium reservoir source to boost the electrochemical performance of potassium-ion batteries, and how this strategy is expected to promote their practical application.
Chloro-Functionalized Ether-Based Electrolyte for High-Voltage and Stable Potassium-Ion Batteries

Yanyao Hu,Hongwei Fu,Yuanhui Geng,Xiaoteng Yang,Ling Fan,Jiang Zhou,Bingan Lu

DOI: https://doi.org/10.1002/anie.202403269

2024-06-03

Abstract:Ether-based electrolyte is beneficial to obtaining good low-temperature performance and high ionic conductivity in potassium ion batteries. However, the dilute ether-based electrolytes usually result in ion-solvent co-intercalation of graphite, poor cycling stability, and hard to withstand high voltage cathodes above 4.0 V. To address the aforementioned issues, an electron-withdrawing group (chloro-substitution) was introduced to regulate the solid-electrolyte interphase (SEI) and enhance the oxidative stability of ether-based electrolytes. The dilute (~0.91 M) chloro-functionalized ether-based electrolyte not only facilitates the formation of homogeneous dual halides-based SEI, but also effectively suppress aluminum corrosion at high voltage. Using this functionalized electrolyte, the K||graphite cell exhibits a stability of 700 cycles, the K||Prussian blue (PB) cell (4.3 V) delivers a stability of 500 cycles, and the PB||graphite full-cell reveals a long stability of 6000 cycles with a high average Coulombic efficiency of 99.98 %. Additionally, the PB||graphite full-cell can operate under a wide temperature range from -5 °C to 45 °C. This work highlights the positive impact of electrolyte functionalization on the electrochemical performance, providing a bright future of ether-based electrolytes application for long-lasting, wide-temperature, and high Coulombic efficiency PIBs and beyond.
Empowering the Potassium-Sulfur Battery with Commendable Reaction Kinetics and Capacity Output by Localized High-Concentration Electrolytes

Xiaojuan Chen,Yan Meng,Dan Xiao,Lei Qin

DOI: https://doi.org/10.1021/acsami.3c19583

IF: 9.5

2024-05-07

ACS Applied Materials & Interfaces

Abstract:Potassium-sulfur (K-S) batteries are one of the promising high-energy-density candidates beyond current lithium-ion batteries. Nevertheless, in practice, the utilization of K-S batteries is largely hindered due to the dissolution and shuttle effect of the cathode redox intermediates and the scarcity of an effective anode protection layer in conventional electrolytes. Herein, electrolyte engineering is applied to formulate an ether-based localized high-concentration electrolyte (LHCE) for the...

materials science, multidisciplinary,nanoscience & nanotechnology
Potassium-Hydrogen Hybrid Ion Alkaline Battery: A New Rechargeable Aqueous Battery Combined a K + Storage Cathode and an Electrochemical Hydrogen Storage Anode

Ruiqing Hua,Caiyun Xu,Hongwei Yang,Deyu Qu,Ruiming Zhang,Dan Liu,Haolin Tang,Junsheng Li,Deyang Qu

DOI: https://doi.org/10.1021/acsami.4c01499

IF: 9.5

2024-04-11

ACS Applied Materials & Interfaces

Abstract:A rechargeable aqueous hybrid ion alkaline battery, using a proton and a potassium ion as charge carriers for the anode and cathode, respectively, is proposed in this study by using well-developed potassium nickel hexacyanoferrate as the cathode material and mesoporous carbon sheets as the anode material, respectively. The constructed battery operates in a concentrated KOH solution, in which the energy storage mechanism for potassium nickel hexacyanoferrate involves the redox reaction of...

materials science, multidisciplinary,nanoscience & nanotechnology
Improving Metal Anode Stability in Potassium Oxygen Batteries with Concentrated Electrolyte

Xiaodi Ren,Kah Chun Lau,Yiying Wu

DOI: https://doi.org/10.1149/ma2016-03/2/415

2016-01-01

Abstract:In recent years, metal-oxygen batteries, especially non-aqueous lithium-oxygen batteries (or Li-O2 batteries), have drawn considerable research attention for future energy storage applications due to high theoretical specific energy densities. Compared to conventional lithium-oxygen batteries, potassium-oxygen (K-O2) batteries are based on a reversible O2/KO2 redox chemistry, resulting in much better round-trip efficiencies (higher than 90%) without using electrocatalysts. While the reversibility of the cathode reactions is improved, the cycling performance of K-O2 batteries is greatly limited by the K metal anode stability. The highly reducing K anode would react with electrolyte molecules and degrade seriously during cycling. Moreover, the oxygen crossover to the anode further accelerate the degradation process. Here, we report our studies about the improved K metal anode stability in K-O2 batteries with concentrated electrolytes. It is shown that in this class of electrolytes, a stable Solid Electrolyte Interface (SEI) layer is critical for protecting the K anode and suppressing the undesired side reactions. As a result, the metal anode cycling efficiency and the cycle life of K-O2 batteries can be largely increased.
Anion‐Reinforced Solvation Structure Enables Stable Operation of Ether‐Based Electrolyte in High‐Voltage Potassium Metal Batteries

Mengjia Gu,Xunzhu Zhou,Qian Yang,Shenxu Chu,Lin Li,Jiaxin Li,Yuqing Zhao,Xing Hu,Shuo Shi,Zhuo Chen,Yu Zhang,Shulei Chou,Kaixiang Lei

DOI: https://doi.org/10.1002/anie.202402946

2024-05-03

Angewandte Chemie International Edition

Abstract:Electrolytes with anion-dominated solvation are promising candidates to achieve dendrite-free and high-voltage potassium metal batteries. However, it's challenging to form anion-reinforced solvates at low salt concentrations. Herein, we construct an anion-reinforced solvation structure at a moderate concentration of 1.5 M with weakly coordinated cosolvent ethylene glycol dibutyl ether. The unique solvation structure accelerates the desolvation of K+, strengthens the oxidative stability to 4.94 V and facilitates the formation of inorganic-rich and stable electrode-electrolyte interface. These enable stable plating/stripping of K metal anode over 2200 h, high capacity retention of 83.0% after 150 cycles with a high cut-off voltage of 4.5 V in K0.67MnO2//K cells, and even 91.5% after 30 cycles under 4.7 V. This work provides insight into weakly coordinated cosolvent and opens new avenues for designing ether-based high-voltage electrolytes.

chemistry, multidisciplinary
Latent solvent‐induced inorganic‐rich interfacial chemistry to achieve stable potassium‐ion batteries in low‐concentration electrolyte

Qian Yang,Xunzhu Zhou,Tingting Huang,Zhuo Chen,Yu Zhang,Shuo Shi,Wen Zhang,Lin Li,Jiazhao Wang,Shixue Dou,Kaixiang Lei,Shijian Zheng

DOI: https://doi.org/10.1002/anie.202422259

2024-12-06

Angewandte Chemie International Edition

Abstract:Low-concentration electrolytes (LCEs) have attracted great attention due to their cost effectiveness and low viscosity, but suffer undesired organic-rich interfacial chemistry and poor oxidative stability. Herein, a unique latent solvent, 1,2-dibutoxyethane (DBE), is proposed to manipulate the anion-reinforced solvation sheath and construct a robust inorganic-rich interface in a 0.5 M electrolyte. This unique solvation structure reduces the desolvation energy, facilitating rapid interfacial kinetics and K+ intercalation in graphite. Additionally, enhanced anion-cation interactions promote the formation of a thin and robust interfacial layer with excellent cycling performance of potassium-ion batteries (PIBs). Graphite||perylene-3,4,9,10-tetracarboxylic dianhydride full cell exhibits a good capacity retention of 80.3% after 300 cycles, and delivers a high discharge capacity of 131.3 mAh g-1 even at 500 mA g-1. This study demonstrates the feasibility of latent solvent-optimized electrolyte engineering, providing a pathway of superior electrochemical energy storage in PIBs.

chemistry, multidisciplinary
Designing Electrolytes with Steric Hindrance and Film‐Forming Booster for High‐Voltage Potassium Metal Batteries

Zhenlu Yu,Ke Fan,Qun Liu,Danni Wang,Changsheng Chen,Ye Zhu,Haitao Huang,Biao Zhang

DOI: https://doi.org/10.1002/adfm.202315446

IF: 19

2024-01-02

Advanced Functional Materials

Abstract:Abstract Potassium metal batteries coupling with high‐voltage manganese hexacyanoferrate (MnHCF) cathodes are promising candidates for energy storage devices. Ethers are the primary electrolyte solvent candidates for reversible potassium metal anodes, but their poor oxidative stability at high voltage restricts the application. Taking advantage of the steric hindrance, a dilute (1 m ) non‐fluorinated ether with extended alkyl groups is designed to reduce the solvation capability to K ions, thus suppressing the solvent decomposition and tailoring the interphase composition on both cathode and anode sides. The accompanying high viscosity associated with the long alkyl groups can be readily resolved by incorporating an S‐containing additive, which further boosts the oxidative stability to 4.6 V. Furthermore, the additive contributes to the S‐rich organic species among the interphases that inhibit the metal dissolution of the cathode and induce the homogenous K deposition through promoted kinetics. Benefiting from the stable interphases and restricted side reactions, the dilute non‐fluorinated ether‐based electrolyte enables the stable cycling of MnHCF||K cell for over 200 cycles with a high Coulombic efficiency of over 99.4% under a negative/positive capacity ratio of 4.

materials science, multidisciplinary,chemistry, physical,physics, applied, condensed matter,nanoscience & nanotechnology
New enhancement mechanism of ether-based electrolyte in cobalt sulfide-containing potassium-ion batteries

Enze Li,Zhibin Li,Hao Wang,Guiping Zhang,Shuli Li,Junfeng Li,Likun Pan,Wenjie Mai,Jinliang Li,Ma Liang

DOI: https://doi.org/10.1039/d2nr03418b

IF: 6.7

2022-07-18

Nanoscale

Abstract:The performance of potassium (K)-ion batteries (KIBs) is not only dependent on the electrode materials but also highly related to the electrolyte. In this work, we obtained cobalt sulfide (CS)-containing hybrid by hydrothermal method and subsequent thermal treatment for K-ion storage. After the ether-based electrolyte matching, the CS-containing hybrid achieves a specific capacity of 229 mAh g-1 at 1 A g-1 after 300 cycles, which presents an enhancement performance of the CS-containing hybrid in the ester-based electrolyte. According to our measurement and calculation, CS-containing hybrid in ether-based electrolyte promotes the formation of high anionic coordination solvated structure, which contributes to the enhancement of stability of the electrolyte for K-ion storage. In addition, the strong coordination of anion also facilitates the rapid separation of solvent during the potassiation process, which is also in favor of the decrease of side reaction of CoS@RGO hybrid for KIBs. We believe that our work will provide a new perspective on electrolyte engineering to boost the electrode material performance for K-ion storage.

materials science, multidisciplinary,physics, applied,nanoscience & nanotechnology,chemistry
Homologous MXene‐Derived Electrodes for Potassium‐Ion Full Batteries (Adv. Energy Mater. 23/2022)

Lanju Sun,Jikai Sun,Shengliang Zhai,Tiantian Dong,Hongyan Yang,Yi Tan,Xu Fang,Chengcheng Liu,Wei‐Qiao Deng,Hao Wu

DOI: https://doi.org/10.1002/aenm.202270098

IF: 27.8

2022-06-17

Advanced Energy Materials

Abstract:Potassium‐ion Batteries The development of potassium‐ion battery (PIB) electrode materials is vital to next‐generation energy storage. In article number 2200113, Hao Wu and co‐workers propose an unlocking metal‐organic framework (MOF) node strategy to increase the K+ adsorption energy, leading to significantly improved K+ storage capacity. Moreover, a PIB is assembled with a homologous MXene‐derived MOF anode and a K+‐intercalated vanadium oxide cathode.

materials science, multidisciplinary,chemistry, physical,physics, applied, condensed matter,energy & fuels
Low Concentration Dmf/H2o Hybrid Electrolyte: A New Opportunity For Anode Materials In Aqueous Potassium-Ion Batteries

Xinran Yuan,Yibo Li,Yanan Zhu,Wenjun Deng,Chang Li,Zhuqing Zhou,Jun Hu,Man Zhang,Haibiao Chen,Rui Li

DOI: https://doi.org/10.1021/acsami.1c08151

IF: 9.5

2021-01-01

ACS Applied Materials & Interfaces

Abstract:Superconcentrated "water-in-salt" electrolytes have greatly widened the electrochemical stable window (ESW) of aqueous electrolytes, but they also generate new problems, including high costs, high viscosity, and low conductivity. Here we report a 2 m low concentration electrolyte using an N,N-dimethylformamide/water (DMF/H2O) hybrid solvent, which provides a wider ESW (2.89 V) than an aqueous electrolyte (2.66 V) and presents nonflammability, high conductivity, and low viscosity characteristics. In 2 m DMF/H2O hybrid electrolyte, the LUMO energy of the DMF solvent (-0.00931 a.u.) is lower than that of H2O (-0.00735 a.u.), which could effectively promote the degradation of FSI- and lead to stable solid electrolyte interphase formation. As a result, the electrochemical reversibility and cyclability of the KTi2(PO4)(3)@C (KTP@C) anode in the aqueous electrolyte have been significantly enhanced with the help of DMF addition. Moreover, the K2Zn3(Fe(CN)(6))(2) (KZnHCF)//KTP@C full potassium-ion battery exhibits highly efficient stability and rate capability with a long cycle performance over 10 000 cycles and delivers a specific discharge capacity of 33 mAh g(-1) at a high current density of 20 A g(-1) . Low concentrations of DMF/H2O hybrid electrolytes can inhibit the hydrogen evolution reaction of aqueous electrolytes, providing more opportunities for the practical application of electrode materials. Not limited to DMF solvent, mixing organic and aqueous solvents will provide more available options and perspectives for improving the energy density and long cycle performance of the aqueous metal-ion battery.
A Low-Overpotential Potassium-Oxygen Battery Based on Potassium Superoxide

Xiaodi Ren,Yiying Wu

DOI: https://doi.org/10.1021/ja312059q

IF: 15

2013-01-01

Journal of the American Chemical Society

Abstract:Li-O-2 battery is regarded as one of the most promising energy storage systems for future applications. However, its energy efficiency is greatly undermined by the large overpotentials of the discharge (formation of Li2O2) and charge (oxidation of Li2O2) reactions. The parasitic reactions of electrolyte and carbon electrode induced by the high charging potential cause the decay of capacity and limit the battery life. Here, a K-O-2 battery is report that uses K+ ions to capture O-2(-) to form the thermodynamically stable KO2 product. This allows for the battery to operate through the one-electron redox process of O-2/O-2(-). Our studies confirm the formation and removal of KO2 in the battery cycle test. Furthermore, without the use of catalysts, the battery shows a low discharge/charge potential gap of less than 50 mV at a modest current density, which is the lowest one that has ever been reported in metal-oxygen batteries.
Co‐Solvent Electrolyte Design to Inhibit Phase Transition toward High Performance K+/Zn2+ Hybrid Battery

Wei Chen,Jiahao Wu,Kai Fu,Zhaohui Deng,Xingbao Chen,Hongwei Cai,Xinfei Wu,Boyu Xing,Wen Luo,Liqiang Mai

DOI: https://doi.org/10.1002/smtd.202300617

IF: 12.4

2023-07-11

Small Methods

Abstract:By adding propylene carbonate (PC) as cosolvent, a novelelectrolyte solvation structure which plays a triple role in inhibiting the phase transition from Manganese hexacyanoferrate to Zinc hexacyanoferrate, broadening the electrochemical working window, and inhibiting zinc dendrite formation is designed to realize high‐performance K+/Zn2+ hybrid battery. Manganese hexacyanoferrate (MnHCF) is one of the most promising cathode materials for aqueous battery because of its non‐toxicity, high energy density, and low cost. But the phase transition from MnHCF to Zinc hexacyanoferrate (ZnHCF) and the larger Stokes radius of Zn2+ cause rapid capacity decay and poor rate performance in aqueous Zn battery. Hence, to overcome this challenge, a solvation structure of propylene carbonate (PC)‐trifluoromethanesulfonate (Otf)‐H2O is designed and constructed. A K+/Zn2+ hybrid battery is prepared using MnHCF as cathode, zinc metal as anode, KOTf/Zn(OTf)2 as the electrolyte, and PC as the co‐solvent. It is revealed that the addition of PC inhabits the phase transition from MnHCF to ZnHCF, broaden the electrochemical stability window, and inhibits the dendrite growth of zinc metal. Hence, the MnHCF/Zn hybrid co‐solvent battery exhibits a reversible capacity of 118 mAh g−1 and high cycling performance, with a capacity retention of 65.6% after 1000 cycles with condition of 1 A g−1. This work highlights the significance of rationally designing the solvation structure of the electrolyte and promotes the development of high‐energy‐density of aqueous hybrid ion batteries.

materials science, multidisciplinary,chemistry, physical,nanoscience & nanotechnology
Super-concentrated alkali hydroxide electrolytes for rechargeable Zn batteries

Yilin Ma,Jiajia Huang,Shengyong Gao,iangyu Li,Zhibin Yi,Diwen Xiao,Cheuk Kai Kevin Chan,Ding Pan,Qing Chen

2024-05-13

Abstract:Rechargeable Zn batteries offer safe, inexpensive energy storage, but when deeply discharged to compete with lithium-ion batteries, they are plagued by parasitic reactions at the Zn anodes. We apply super-concentrated alkaline electrolytes to suppress two key parasitic reactions, hydrogen evolution and ZnO passivation. An electrolyte with 15 M KOH displays a broad electrochemical window (>2.5 V on Au), a high ZnO solubility (>1.5 M), and an exceptionally high ionic conductivity (>0.27 S/cm at 25 C). Spectroscopies and ab-initio molecular dynamics simulation suggest K+-OH- pairs and a tightened water network to underpin the stability. The simulation further reveals unique triggered proton hopping that offsets the lack of water wires to sustain the conductivity. Low hydrogen evolution, confirmed via online mass spectroscopy, and slow passivation enable a NiOOH||Zn battery to deliver a cumulative capacity of 8.4 Ah cm-2 and a Zn-air battery to last for over 110 hours.

Materials Science,Chemical Physics

Hybrid-Solvent Electrolytes for Enhanced Potassium-Oxygen Battery Performance

A Nonflammable Electrolyte Enabled High Performance K0.5MnO2 Cathode for Low-Cost Potassium-Ion Batteries

Adapting a Kinetics-Enhanced Carbon Nanostructure to Li/Na Hybrid Water-in-Salt Electrolyte for High-Energy Aqueous Supercapacitors

Regulating the Solvation Structure of Potassium Ions Using a Multidentate Ether in Potassium Metal Batteries

Highly‐solvating Electrolyte Enables Mechanically Stable and Inorganic‐rich Cathode Electrolyte Interphase for High‐performing Potassium‐ion Batteries

Restructuring Electrolyte Solvation by a Partially and Weakly Solvating Cosolvent toward High-Performance Potassium-Ion Batteries

Nonfluorinated Antisolvents for Ultrastable Potassium-Ion Batteries

High-efficiency Cathode Potassium Compensation and Interfacial Stability Improvement Enabled by Dipotassium Squarate for Potassium-Ion Batteries

Chloro-Functionalized Ether-Based Electrolyte for High-Voltage and Stable Potassium-Ion Batteries

Empowering the Potassium-Sulfur Battery with Commendable Reaction Kinetics and Capacity Output by Localized High-Concentration Electrolytes

Potassium-Hydrogen Hybrid Ion Alkaline Battery: A New Rechargeable Aqueous Battery Combined a K + Storage Cathode and an Electrochemical Hydrogen Storage Anode

Improving Metal Anode Stability in Potassium Oxygen Batteries with Concentrated Electrolyte

Anion‐Reinforced Solvation Structure Enables Stable Operation of Ether‐Based Electrolyte in High‐Voltage Potassium Metal Batteries

Latent solvent‐induced inorganic‐rich interfacial chemistry to achieve stable potassium‐ion batteries in low‐concentration electrolyte

Designing Electrolytes with Steric Hindrance and Film‐Forming Booster for High‐Voltage Potassium Metal Batteries

New enhancement mechanism of ether-based electrolyte in cobalt sulfide-containing potassium-ion batteries

Homologous MXene‐Derived Electrodes for Potassium‐Ion Full Batteries (Adv. Energy Mater. 23/2022)

Low Concentration Dmf/H2o Hybrid Electrolyte: A New Opportunity For Anode Materials In Aqueous Potassium-Ion Batteries

A Low-Overpotential Potassium-Oxygen Battery Based on Potassium Superoxide

Co‐Solvent Electrolyte Design to Inhibit Phase Transition toward High Performance K+/Zn2+ Hybrid Battery

Super-concentrated alkali hydroxide electrolytes for rechargeable Zn batteries