Abstract:To improve the hydrophobicity and thermoplastic processability of starch, lactic acid esterified starch (LA-e-starch) was prepared by in-situ solid phase esterification with corn starch as the raw material and LA as the esterifying agent. Fourier transform infrared spectroscopy confirmed that the esterification reaction was successful. The optimal esterification efficiency of LA-e-starch was obtained when the LA proportion was 20% by mass, catalyst ratio at 3%, reaction temperature 80 °C and reaction time 2.5 h. LA-e-starch was characterized by scanning electron microscopy (SEM), contact angle (CA) analysis, X-ray diffractometry (XRD), differential scanning calorimetry (DSC), and thermogravimetric analysis (TGA) as well as its water absorption rate evaluated. Results showed that in-situ solid phase esterification mainly occurred on starch granule surfaces and did not destroy the starch granularity. LA-e-starch surfaces were covered with a layer of polylactic acid resin, which caused starch granules to stick together. The initial contact angle of LA-e-starch was clearly larger than that of native starch and the water absorption rate lower than native starch in a 168 h test time, which showed that esterification effectively improved the hydrophobicity of starch. This esterification destroyed the crystalline structure of starch to some extent, resulting in a crystallinity reduction to 25.16%. In addition, the gelatinization temperature and enthalpy were lower than those of native starch. XRD and DSC analyses indicated that esterification modification increased starch thermoplasticity. Also, LA-e-starch exhibited better thermal stability than native starch, from which it was inferred that this application of esterification could improve the thermoplastic processability of starch modify the interfacial compatibility between starch and polymer resins.

Two-Step Method of Enzymatic Synthesis of Starch Laurate in Ionic Liquids

Lipase-Catalyzed Synthesis of Starch Palmitate in Mixed Ionic Liquids

In Situ Polymerization of Starch with Lactic Acid in Aqueous Solution and the Microstructure Characterization

Synthesis of high fatty acid starch esters with 1-butyl-3-methylimidazolium chloride as a reaction medium

Ionic liquids as solvents for dissolution of corn starch and homogeneous synthesis of fatty-acid starch esters without catalysts

Organic Solvent‐free Transesterification of Various Starches with Lauric Acid Methyl Ester and Triacyl Glycerides

Synthesis of Laurate Starch Using Immobilized Lipase

Solvent-free lipase-catalyzed synthesis of long-chain starch esters using microwave heating: Optimization by response surface methodology

Preparation of lauric acid esterified starch by ethanol solvothermal process and its Pickering emulsion

Synthesis of long-chain fatty acid starch esters in aqueous medium and its characterization

Esterification of potato starch by a biocatalysed reaction in an ionic liquid

Recent Progress in Lipase-Catalyzed Synthesis of Long-Chain Fatty Acid Starch Esters in Non-Aqueous Phase

A Green Technology for the Preparation of High Fatty Acid Starch Esters: Solid-Phase Synthesis of Starch Laurate Assisted by Mechanical Activation with Stirring Ball Mill as Reactor

Mechanistic Considerations of Efficient Esterification of Starch with Propionic Anhydride/Lauric Acid in the Green Solvent Imidazole

Lipase‐catalyzed Synthesis of Long‐chain Cellulose Esters Using Ionic Liquid Mixtures As Reaction Media

Hydrophobic and Melt Processable Starch-Laurate Esters: Synthesis, Structure-Property Correlations

Synthesis and characterization of lactic acid esterified starch by an in-situ solid phase method

Synthesis of Higher Fatty Acid Starch Esters using Vinyl Laurate and Stearate as Reactants

Lipase-coupling esterification of starch with octenyl succinic anhydride

Homogeneous synthesis and characterization of starch acetates in ionic liquid without catalysts