Abstract:Carbon fiber structural composite supercapacitors possess the multifunctionality of storing electrochemical energy and withstanding mechanical loads simultaneously, attracting increased attention in electric vehicles, drones, and aircraft sectors. A polymer-based coating was meticulously constructed at the electrode/electrolyte interface to enhance adhesion and stability between active materials and the carbon fiber fabric collector under diverse conditions, especially mechanical stress. Mechanical testing and corresponding physical characterization substantiated the superior performance of the polymer coating. With the protective polymer coating, the optimized structural composite Zn-ion supercapacitor (SZSC), consisting of carbon fiber@active carbon-P (CF@AC-P) cathode, ionogel electrolyte, and Zn anode, displayed a maximum energy density of 164.6 mWh kg −1 , at power density of 563.3 mW kg −1 . Moreover, the optimized SZSC demonstrated stable operation over more than 8000 cycles at 0.3 mA cm −2 without capacity degradation. The optimized SZSC exhibited a tensile strength of 399.7 MPa and Young's modulus of 11.5 GPa. Furthermore, employing vacuum infusion techniques, the fabricated three-dimensional (3D) wing skin model shell and tube shell curved-surface structural composite Zn-ion supercapacitor component composites showcased exceptional electrochemical performance. These achievements further validate the practicality of 3D multifunctional composites. Consequently, this research presented a practical and straightforward interface engineering approach to develop multifunctional structural devices with remarkable electrochemical and mechanical properties.

Electrochemical energy storage performance of one-step laser written Cu-C composites

High-performance supercapacitors of Cu-based porous coordination polymer nanowires and the derived porous CuO nanotubes.

All-solid-state Supercapacitors from Natural Lignin-Based Composite Film by Laser Direct Writing

One-step visible laser writing of Cu-doped graphene hybrid structure for in-plane supercapacitor assembly

One-step Pulsed Laser Deposition of Metal oxynitride/Carbon Composites for Supercapacitor Application

One-step Pulsed Laser Deposition of Carbon/Metal oxynitride Composites for Supercapacitor Application

Laser Direct Writing of MnO2/Carbonized Carboxymethylcellulose-Based Composite As High-Performance Electrodes for Supercapacitors

Recent Progress on Laser Fabrication of On-Chip Microsupercapacitors

Advances in design of copper-based nanostructures and nanocomposites for high-performance supercapacitors

Tailoring MXene films via laser direct writing for enhanced performance of supercapacitors

One-Step In Situ Self-Assembly of Cypress Leaf-Like Cu(OH) 2 Nanostructure/Graphene Nanosheets Composite with Excellent Cycling Stability for Supercapacitors

Self-assembled MXene-Graphene Oxide Composite Enhanced Laser-induced Graphene based Electrodes towards Conformal Supercapacitor Applications

Laser-induced manganese oxide/graphene composite electrodes with commercial-level mass loading towards high-performance supercapacitors

Laser writing of the restacked titanium carbide MXene for high performance supercapacitors

Achieving enhanced multifunctional performance for structural composite supercapacitors by reinforcing interfaces with polymer coating

Mechanical and Electrochemical Performance of Hybrid Laminated Structural Composites with Carbon Fiber/ Solid Electrolyte Supercapacitor Interleaves

High–performance 3D CuO/Cu Flowers Supercapacitor Electrodes by Femtosecond Laser Enhanced Electrochemical Anodization

One‐pot Synthesis of Flake Cu 1.81 S/C Composite for High‐performance Supercapactiors Electrodes

High-performance electrode of ZIF-67 metal-organic framework (MOF) loaded laser-induced graphene (LIG) composite for all-solid-state supercapacitor

Well-coordinated bimetal sulfide MnS/Cu 2 S/C composite for high performance supercapacitors

Cu/CuxO@C nanocomposites as efficient electrodes for high-performance supercapacitor devices