Abstract:The energy density of the inductive energy storage systems is one order of magnitude higher than that of the capacitive ones. The STRETCH meat grinder with ICCOS put forward by Tsinghua University is a typical inductive pulsed power supply for electromagnetic launch system, which has remarkable current amplification ability as a single module. But one module can not provide enough amplitude and width for the load current of the railgun launching. So the collaborative work of multiple inductive source modules is necessary. In this paper the designed inductive power supply system of about 1MJ is composed of 40 STRETCH meat grinder with ICCOS modules. All the main switches are opened simultaneously to reduce the magnetic field coupling among the modules and make the current rising edge steep. The modules are divided into groups. The triggering delays of the thyristors between every two adjacent groups are carefully designed. After the first period triggers for all the modules, the energy stored on the capacitors can be further utilized with the second period triggers. The numerical analysis and the simulation results show that the appropriate collaborative triggering delay can increase the adjustability of the output current width and the second period triggers can further increased the current width and increase the system efficiency. So the load current with flat shape, appropriate amplitude, and longer duration can be provided with modular design and collaborate triggering discharge of multiple modules. This can provide a theoretical foundation for the future study and implementation.

Multiple Coil Architecture for Inductive Pulsed Power Supplies

Investigation on a Novel Multiple-Switch Pulsed Power Technology

All-Detuned Three-Coil Configuration for Advantages in Inductive Power Transfer Systems

A Repetitive Pulser with Four Spark Gap Switches

A Novel Circuit Topology for Pulsed Power Generation

Simulation of an Electromagnetic Launcher with a Superconducting Inductive Pulsed Power Supply

XRAM Generator with Strongly Coupled Inductors and Design of 100 Kilojoules Module

Inductive Pulsed Power Supply Consisting of Superconducting Pulsed Power Transformers with Marx Generator Methodology

Conceptual Design and Comparison for 100-Kj Inductive Pulse Power Supplies

Serial-charge-parallel-discharge inductive energy supply for coilgun system

An Inductive-capacitive Hybrid Pulsed-power Supply for Electromagnetic Launch

A Review of the Current Research Situation of Inductive Pulsed-Power Supplies for Electromagnetic Launch

Overview of Circuit Topologies for Inductive Pulsed Power Supplies

The Meat Grinder With CPFU: A Novel Circuit for Inductive Pulsed Power Supplies

Circuit Topology of A New Inductive Storage Pulsed-Power Supply to Drive Railgun

Study on the Collaborative Triggering of Multiple Stretch Meat Grinder with Iccos Modules

Review of the Meat Grinder Circuits for Railguns

Design, Construction, and Testing of an 80-kJ and 2.4-MJ/m<SUP>3</SUP> Inductive Pulsed Power Module for Electromagnetic Launchers

A Novel, Compact SSMG Architecture for Portable Pulsed Electric Field Applications

Discussion on Topologies of Quick Response IPPS Suitable for Closed-Loop Control of EML

A Pulsed Current Charging Mechanism for High Temperature Superconducting Magnets