1 EX / P 209 First-Principles Model-based Closed-loop Control of the Current Profile Dynamic Evolution on DIII -
J. Barton,M. Boyer,W. Shi,W. Wehner,E. Schuster,T. Luce,J. Ferron,M. Walker,D. Humphreys,B. Penaflor,R. Johnson
2014-01-01
Abstract:Abstract. Recent experiments performed at DIII-D represent the first successful application of firstprinciples-driven, model-based, closed-loop magnetic profile control in a tokamak. For ITER to be capable of operating in advanced tokamak operating regimes, characterized by a high fusion gain, good plasma confinement, magnetohydrodynamic stability, and a noninductively driven plasma current, for extended periods of time, several challenging plasma control problems still need to be solved. For instance, setting up a suitable toroidal current density profile, which will require active closed-loop profile control, is key for one possible advanced operating scenario characterized by noninductive sustainment of the plasma current and steady-state operation. The current profile evolution in tokamaks is related to the poloidal magnetic flux profile evolution, which is modeled in normalized cylindrical coordinates using a nonlinear partial di↵erential equation referred to as the magnetic di↵usion equation. For control design purposes, the magnetic di↵usion equation has been combined with empirical correlations obtained from physical observations and experimental data from DIII-D for the electron temperature, plasma resistivity, and noninductive current drive to develop a control-oriented model of the system valid for low confinement mode discharges. This first-principles-driven model was used to synthesize a combined feedforward + feedback control scheme to drive the current profile to a desired target profile. Static and dynamic plasma response models were integrated into the design of the feedback controllers, and as a result, the model-based controllers know in which direction to actuate the system to generate a desired response in the profile evolution thanks to the embedded physics. Therefore, the need for trial-and-error tuning of the control scheme is eliminated, which is desirable for application on ITER where discharges are at a premium. A general framework for real-time feedforward + feedback control of magnetic and kinetic plasma profiles was implemented in the DIII-D Plasma Control System, and experimental results are presented to demonstrate the ability of the first-principles-driven, model-based feedback controllers to control the current profile evolution. These results demonstrate the applicability of this control scheme to active, closed-loop current profile control in advanced operating scenarios on ITER.