Abstract:<p class="a-plus-plus">The pulse profiles of the Crab pulsar (as well as some other pulsars) vary with time. They can lead to a major source of intrinsic timing noise, which lacks a detailed physical model. The phase separation Δ between the first left peak (P1) and the second right peak (P2) is a key parameter that shows the variations of pulse profiles for the Crab pulsar. It was found that the evolution of A has a tendency with increasing rates of 0.82° ± 0.25°, 0.80° ± 0.54°, and 0.77° ± 0.28° per century for the 2–6, 6–15, and 15–60 keV bands, respectively. Furthermore, the flux ratios (P2/P1) of X-ray pulse profiles in the three bands were calculated, and the derived flux ratios were consistent with the radio and X-ray measurements of the <em class="a-plus-plus">Insight</em>-HXMT. In addition to discovering the physical origin of the pulse changes, the high-SNR X-ray pulse profiles were simulated in the annular gap model, and two model parameters (e.g., the maximum emission heights of the two peaks) were observed to slightly affect the variations of peak separation. We fitted the long-term variations of emission heights of the two peaks and discovered that the emission heights showed increasing tendencies with time. Variations of these emission heights induced a characteristic period derivative, and a complete formula for both the magnetic dipole radiation and wind-particle-induced variations of the moment of inertia was used for the pulsar's spin-down to obtain the variation rate ά of the magnetic inclination angle, which was −1.60° per century. Intrinsic timing noise is observed to be mainly induced by the variations of pulse profiles, which might correlate with a characteristic spin period derivative arising from the fluctuations of the emission regions. This work will lay a foundation for understanding the origin of intrinsic timing noise and making high-precision timing models in the future.</p>

Characterizing Timing Noise in Normal Pulsars with the Nanshan Radio Telescope

Hurst parameter analysis of radio pulsar timing residuals

Follow-up Timing of 24 Pulsars Discovered in Commensal Radio Astronomy FAST Survey

Hurst Parameter Analysis of Radio Pulsar Timing Noise

Timing of young radio pulsars I: Timing noise, periodic modulation and proper motion

Noise in pulsar timing arrays

Particle Emission-Dependent Timing Noise of Pulsars

Long-term variations of X-ray pulse profiles for the Crab pulsar: data analysis and modeling

A Model-Independent Determination of Red Noise in Pulsar Timing Arrivals

The NANOGrav 11-year Data Set: High-precision Timing of 45 Millisecond Pulsars

Characterization of the Crab Pulsar's Timing Noise

Timing Gamma-ray Pulsars with the Fermi Large Area Telescope: Timing Noise and Astrometry

Statistical Analyses for NANOGrav 5-year Timing Residuals

Follow-up timing of 12 pulsars discovered in Commensal Radio Astronomy FAST Survey

Exploring pulsar timing precision: A comparative study of polarization calibration methods for NANOGrav data from the Green Bank Telescope

Reducing instrumental errors in Parkes Pulsar Timing Array data

An insight into chromatic behaviour of jitter in pulsars and its modelling: A case study of PSR J0437$-$4715

Limitations in timing precision due to single-pulse shape variability in millisecond pulsars

Spin-down and emission variations for PSR J0742−2822