Abstract:The low magnetic shear in W7-X stellarator makes it feasible to shape the separatrix by the large islands constituting an island-divertor, and this can be exploited to access various magnetic configurations, including samples of different internal island sizes and locations. To investigate the configuration effects on the plasma confinement, a configuration scan was performed by changing coil currents to vary the rotational transform between values 5/4 and 5/6 at the plasma boundary with different power levels (2, 4, 6 MW) of ECRH at a maximum plasma density of 8 ×10 19 m −2 . NBI heating was also applied during some configurations of the scan to create a density ramp and access high densities beyond X2 ECRH cutoff. For the magnetic configurations, where the 5/5 and 5/6 island chains were moved closer to separatrix but remaining inside the last closed flux surface, the electron cyclotron emission show that an electron temperature, Te, pedestal develops already during ECRH heated plasma buildup phase indicating transport barrier and the barrier sustains irrespective of changed plasma heating conditions such as NBI in the later part of discharge. The transport barrier is broken by subsequent fast crashes, observed with multiple plasma diagnostics with characteristics like tokamak edge localized modes and the corresponding crash amplitude and frequency vary with plasma pressure. The impact of the transport barrier on plasma confinement can be seen through the increased core Te profile, which could be responsible for the overall increase in the stored diamagnetic energy by approximately 10% for these configurations. After the plasma heating is terminated, a back transition to a degraded confinement state is also observed. These observations indicate a configuration triggered high confinement mode in low shear W7-X. This work focuses on the occurrence of this transport barrier for different magnetic configurations and its relation to internal magnetic islands.

Automated W7-X sawtooth crashes detection and characterisation

Model for current drive induced crash cycles in W7-X

Nonlinear Magnetohydrodynamic Modeling of Current-Drive-induced Sawtooth-Like Crashes in the W7-X Stellarator

Global Gyrokinetic Particle Simulations of Microturbulence in W7-X and LHD Stellarators

Real-Time Detection of Overloads on the Plasma-Facing Components of Wendelstein 7-X

Structural Analysis of W7-X: Overview

Steady State Challenge For Soft X-Ray Diagnostics On Wendelstein

Quantification of systematic errors in the electron density and temperature measured with Thomson scattering at W7-X

EX / P 401 1 Ion Heating and Current and Momentum Profile Relaxation During Sawtooth Crashes in the MST Reversed Field Pinch

Diagnostic developments for quasicontinuous operation of the Wendelstein 7-X stellarator.

W7-X Magnet System Thermal Insulation Analysis Under Fast Plasma Decay Conditions

Recent Studies of Tungsten-Based Plasma-Facing Materials in the Linear Plasma Device STEP

Plasma-wall interaction studies in W7-X: main results from the recent divertor operations

Thermo-mechanical Analysis of Wendelstein 7-X Plasma Facing Components

Experimental Study on Fast Electron Generation During Internal Crash

Electron transport barrier and high confinement in configurations with internal islands close to plasma edge of W7-X

Thermo-mechanical analysis of plasma facing components of diagnostics in the Wendelstein 7-X stellarator

Thermal-Mechanical Analysis for In-Vessel Diagnostic Components in W7-X

Analysis of Sawtooth Collapse Time Using Electron Cyclotron Emission Imaging on EAST Tokamak

Impact of spatially varying transport coefficients in EMC3-Eirene simulations of W7-X and assessment of drifts

Counteracting sawtooth crash effects via fluctuation-induced inward transport in HL-2A NBI plasma