Abstract:Lithium-ion batteries (LIBs) have gained considerable attention from the scientific community due to their outstanding properties, such as high energy density, low self-discharge, and environmental sustainability. Among the prominent candidates for anode materials in next-generation LIBs are the spinel ferrites, represented by the MFe 2 O 4 series, which offer exceptional theoretical capacities, excellent reversibility, cost-effectiveness, and eco-friendliness. In the scope of this study, Ni 0.5 Mg 0.5 Fe 1.7 Mn 0.3 O 4 nanoparticles were synthesized using a sol–gel synthesis method and subsequently coated with a carbon layer to further enhance their electrochemical performance. TEM images confirmed the presence of the carbon coating layer on the Ni 0.5 Mg 0.5 Fe 1.7 Mn 0.3 O 4 /C composite. The analysis of the measured X-ray diffraction (XRD) and Raman spectroscopy results confirmed the formation of nanocrystalline Ni 0.5 Mg 0.5 Fe 1.7 Mn 0.3 O 4 before coating and amorphous carbon in the Ni 0.5 Mg 0.5 Fe 1.7 Mn 0.3 O 4 /C after the coating. The Ni 0.5 Mg 0.5 Fe 1.7 Mn 0.3 O 4 anode material exhibited a much higher specific capacity than the traditional graphite material, with initial discharge/charge capacities of 1275 and 874 mA h g −1 , respectively, at a 100 mA g −1 current density and a first coulombic efficiency of 68.54%. The long-term cycling test showed a slight capacity fading, retaining approximately 85% of its initial capacity after 75 cycles. Notably, the carbon-coating layer greatly enhanced the stability and slightly increased the capacity of the as-prepared Ni 0.5 Mg 0.5 Fe 1.7 Mn 0.3 O 4 . The first discharge/charge capacities of Ni 0.5 Mg 0.5 Fe 1.7 Mn 0.3 O 4 /C at 100 mA g −1 current density reached 1032 and 723 mA h g −1 , respectively, and a first coulombic efficiency of 70.06%, with an increase of discharge/charge capacities to 826.6 and 806.2 mA h g −1 , respectively, after 75 cycles (with a capacity retention of 89.7%), and a high-rate capability of 372 mA h g −1 at 2C. Additionally, a full cell was designed using a Ni 0.5 Mg 0.5 Fe 1.7 Mn 0.3 O 4 /C anode and an NMC811 cathode. The output voltage was about 2.8 V, with a high initial specific capacity of 755 mA h g −1 at 0.125C, a high rate-capability of 448 mA h g −1 at 2C, and a high-capacity retention of 91% after 30 cycles at 2C. The carbon coating layer on Ni 0.5 Mg 0.5 Fe 1.7 Mn 0.3 O 4 nanoparticles played a crucial role in the excellent electrochemical performance, providing conducting, buffering, and protective effects.

Uniformly Dispersed Ultrasmall Fe(Co)Ni Alloy Nanoparticles Embedded in Thin‐Walled Carbon Nanotubes as High‐Performance Anode Materials for Lithium‐Ion Battery

Fe 3 O 4 @ C coaxial nanotubes with ultrastable and high capacity for lithium-ion batteries †

Facile Fabrication of Binder-free Metallic Tin Nanoparticle/Carbon Nanofiber Hybrid Electrodes for Lithium-ion Batteries

Strongly Coupled 1d Sandwich-Like C@Fe3o4@C Coaxial Nanotubes With Ultrastable And High Capacity For Lithium-Ion Batteries

Nanoarray Architecture of Ultra-Lithiophilic Metal Nitrides for Stable Lithium Metal Anodes

In situ anchoring of FeNi nanoparticles into three-dimensional nitrogen-doped carbon framework as a self-supporting electrode for high-performance lithium storage

Cactus-like Iron Oxide/Carbon Porous Microspheres Lodged in Nitrogen-Doped Carbon Nanotubes as Anodic Electrode Materials of Lithium Ion Batteries

Low-Temperature Metal-Catalysed Synthesis of Metal Oxide Nanoparticles Encapsulated and Nitrogen-doped Carbon Nanotubes from Carbon Nitride as Anodic Materials of High-Performance Lithium-Ion Batteries

Peanut-like hierarchical carbon nanofibers encapsulated carbon-coated NiCo/NiCoO hollow spheres as high-performance anode materials for Li-Ion Batteries and theoretical insights

Carbon-coated Ni 0.5 Mg 0.5 Fe 1.7 Mn 0.3 O 4 nanoparticles as a novel anode material for high energy density lithium-ion batteries

Novel Fe 3 O 4 -CNTs nanocomposite for Li-ion batteries with enhanced electrochemical performance

Tuning Work Function of Fe2N@C Nanosheets by Co Doping for Enhanced Lithium Storage

Carbon coating hollow NiS nanoparticles anchored on Ti 3 C 2 nanosheet as high-performance anode for Lithium-ion batteries

Rational Synthesis of Spongy Fe3N@N-Doped Carbon Nanorods with Controlled Topography and Porosity for Enhanced Energy Storage Anodes in Lithium-Ion Batteries

Highly Connected Silicon–Copper Alloy Mixture Nanotubes As High‐Rate and Durable Anode Materials for Lithium‐Ion Batteries

NiM (Sb, Sn)/N-doped hollow carbon tube as high-rate and high-capacity anode for lithium-ion batteries

Carbon Matrix NiFeP/C Nanoparticles Anchored on Ti3C2Tx Nanosheets As Heterostructure High-Performance Anode for Lithium-Ion Batteries

Well-dispersed tin nanoparticles encapsulated in amorphous carbon tubes as high-performance anode for lithium ion batteries

Rambutan-like Ni0.5Zn0.5Fe2O4 nanospheres with tunable N-doped carbon shell as anode materials for high performance lithium-ion batteries

Fe2O3 nanoparticles encapsulated in the inner walls of integrated 3D carbon tube grid as high-performance anode for lithium-ion batteries

Electrospun FeCo Nanoparticles Encapsulated in N-doped Carbon Nanofibers As Self-Supporting Flexible Anodes for Lithium-Ion Batteries