Abstract:Adiabatic shear band (ASB), a typical failure mechanism in a metal at high strain rates, is hardly controllable or predictable to some extent. The development of the microstructure plays a crucial role in its formation. In this paper, the effect of strain rate on the development of microstructure in ASB of titanium alloy TC4 is investigated using hat-shaped specimens with the split-Hopkinson pressure bar device. The results show that the fracture strength of TC4 is significantly dependent on the shear strain rate. The increase in fracture strength from a strain rate of 11,300 s −1 to 24,930 s −1 is much higher than that from 24,930 s −1 to 35,620 s −1 , which can be attributed to the effect of strain rate on dislocation evolution. Microstructures in both as-received and deformed states are investigated using various characterization techniques such as electron backscatter diffraction and X-ray diffraction. The region of ASB clearly shows three different microstructural features: random distribution of coarse grains (as received), distribution of elongated grains (transition zone), and distribution of equiaxed nanocrystals (shear-localized zone). The width of ASB increases with the strain rate. The possible reason for this is that the higher the strain rate, the larger the region where dynamic recrystallization (DRX) occurs due to the accumulation of a large number of dislocations. In the middle of ASB, a significant decrease in low-angle grain boundaries (LAGBs) and a large increase in high-angle grain boundaries are observed. The texture of specimens, especially the {11–20} and {10–10} planes, changes significantly during shear deformation at high strain rates. The mechanism of continuous dynamic recrystallization can well explain the formation and evolution of DRX within the ASB.

Effect of strain rate on fracture reliability of Cu45Zr45Co10 amorphous alloy microwires by statistical analyses

Tensile Strength Reliability Analysis of Cu 48 Zr 48 Al 4 Amorphous Microwires

Strain Ratio Effects on Low-Cycle Fatigue Behavior and Deformation Microstructure of 2124-T851 Aluminum Alloy

Tensile Properties and Fracture Reliability of a Glass-Coated Co-based Amorphous Microwire

Nanocrystallization Enabled Tensile Ductility of Co-Based Amorphous Microwires

Relating Residual Stress and Microstructure to Mechanical and Giant Magneto-Impedance Properties in Cold-Drawn Co-based Amorphous Microwires

Effects of deformation parameters and stress triaxiality on the fracture behaviors and microstructural evolution of an Al-Zn-Mg-Cu alloy

Effect of strain rate on tensile behavior in amorphous fibers by an in-situ video extensometer system

Molecular dynamics study of the mechanical behavior of nickel nanowire: Strain rate effects

Influence of Strain Amplitude on Low-Cycle Fatigue Behaviors of a Fourth-Generation Ni-Based Single-Crystal Superalloy at 980 °C

An investigation of the combined size and rate effects on the mechanical responses of FCC metals

Effect of Strain Rate and Temperature on Dynamic Mechanical Behavior and Microstructure Evolution of Ultra-High Strength Aluminum Alloy

The Effect of Strain Rate on the Tensile Deformation Behavior of Single Crystal, Ni-Based Superalloys

Coupled effect of stress state and strain rate on ductile fracture of Ti6Al4V alloy

The effect of strain rate on the evolution of microstructure in aluminium alloys

Strain Rate Sensitivity and Adiabatic Shear Deformation of an Advanced Al-Mg Alloy

A mesoscale investigation of strain rate effect on dynamic deformation of single-crystal copper

Effects of Strain Rate, Temperature and Grain Size on the Mechanical Properties and Microstructure Evolutions of Polycrystalline Nickel Nanowires: A Molecular Dynamics Simulation

Effects of Strain and Strain Rates on Microstructure Evolution Within ASB of TC4

Shock-induced Breaking of the Nanowire with the Dependence of Crystallographic Orientation and Strain Rate

Influence of a Strain Rate and Temperature on the Crack Tip Stress and Microstructure Evolution of Monocrystalline Nickel: A Molecular Dynamics Simulation