Abstract:The authors propose a general design model based on low‐power embedded circuitry for a multi‐function metasurface element and give the corresponding numerical analysis. The authors present a reconfigurable method based on the general design model and prove that the method achieves independent regulation of amplitude and phase for the reflected electromagnetic wave. Through analysis of the sensitive area at the bottom of the embedded circuit, a gradient descent algorithm is proposed to find the optimised phase points according to device sensitivity of the application scenario and suitable strategy. Implementation of reconfigurable metasurfaces demands a complex structure. The design methodology for metasurface elements based on PIN diodes requires targeted optimisation tailored to the varying application environments and cannot be directly transplanted from one methodological approach to another. In addition, inclusion of varactors often imposes undesirable high‐power consumption with complex analog drive circuitry. Furthermore, the design method for the reconfigurable metasurface element has not been simplified and unified, hindering the rapid deployment of metasurface applications. The authors propose a general design model based on low‐power embedded circuitry for a multi‐function metasurface element and give the corresponding numerical analysis. The authors present a reconfigurable method based on the general design model and prove that the method achieves independent regulation of amplitude and phase for the reflected electromagnetic wave. Through analysis of the sensitive area at the bottom of the embedded circuit, a gradient descent algorithm is proposed to find the optimised phase points according to device sensitivity of the application scenario and suitable strategy. Finally, the authors demonstrate that the designed metasurface element possesses phase control capability and decent phase consistency obtained via far‐field scanning experiments. The proposed element design method will provide a theoretical reference for the integrated design of metasurface.

Analytical and numerical analysis of linear and nonlinear properties of an rf-SQUID based metasurface

Modeling of Nonlinear Electromagnetic Response in Metasurface

Imaging collective behavior in an rf-SQUID metamaterial tuned by DC and RF magnetic fields

Euler–Lagrange Analysis of Metamaterial Slabs in Near Field Systems

Effects of Strong Capacitive Coupling Between Meta-Atoms in rf SQUID Metamaterials

Design And Analysis Of Metamaterials For Wireless Power Transfer With Same Resonance Frequency But Different L/C Combinations

Electrodynamic modeling of strong coupling between a metasurface and intersubband transitions in quantum wells

Analytical Modeling of a Two-Dimensional Waveguide-Fed Metasurface

Computational Analysis of Metasurfaces

A Bifunctional Silicon Dielectric Metasurface Based on Quasi-Bound States in the Continuum.

Superconducting RF Metamaterials Made with Magnetically Active Planar Spirals

Field-Circuit Co-Simulation for Microwave Metamaterials with Nonlinear Components

Metasurface optical characterization using quadriwave lateral shearing interferometry

Mathematical analysis of electromagnetic plasmonic metasurfaces

A Numerical Treatment of the Rf SQUID: I. General Properties and Noise Energy

Embedded circuit analysis and design method for reconfigurable metasurface element

Analysis of current distribution and termination conditions in 2D metasurfaces

Critical Frequency of Metasurfaces on Dielectric Half‐space

Analysis of a Waveguide-Fed Metasurface Antenna

Transformation of a Metasurface on the Substrate Interface into the Same Metasurface in a Homogenized Substrate Based on Two Kinds of Modified Babinet’s Principles