Abstract:Copper-graphite composites are promising functional materials exhibiting application potential in electrical equipment and heat exchangers, due to their lower expansion coefficient and high electrical and thermal conductivities. Here, copper-graphite composites with 10-90 vol. % graphite were prepared by hot isostatic pressing, and their microstructure and coefficient of thermal expansion (CTE) were experimentally examined. The CTE decreased with increasing graphite volume fraction, from 17.8 × 10-6 K-1 for HIPed pure copper to 4.9 × 10-6 K-1 for 90 vol. % graphite. In the HIPed pure copper, the presence of cuprous oxide was detected by SEM-EDS. In contrast, Cu-graphite composites contained only a very small amount of oxygen (OHN analysis). There was only one exception, the composite with 90 vol. % graphite contained around 1.8 wt. % water absorbed inside the structure. The internal stresses in the composites were released during the first heating cycle of the CTE measurement. The permanent prolongation and shape of CTE curves were strongly affected by composition. After the release of internal stresses, the CTE curves of composites did not change any further. Finally, the modified Schapery model, including anisotropy and the clustering of graphite, was used to model the dependence of CTE on graphite volume fraction. Modeling suggested that the clustering of graphite via van der Waals bonds (out of hexagonal plane) is the most critical parameter and significantly affects the microstructure and CTE of the Cu-graphite composites when more than 30 vol. % graphite is present.

Electronic structure and physical properties of 13C carbon composite

Graphite in Science and Nuclear Technology

Mesostructure of graphite composite and its lifetime

Advances in the science and technology of carbon nanotubes and their composites: a review

Strength and structure of carbon-carbon reinforced composite

Structure and Thermal Expansion of Cu-90 vol. % Graphite Composites

Carbon Nanotube Reinforced Strong Carbon Matrix Composites

Electronic structure and magnetic properties of graphene/Co composites

PROPERTIES, TYPES, PRODUCTION AND APPLICATION OF NUCLEAR GRAPHITE IN NUCLEAR REACTORS

Graphene-based composite materials

Synthesis and characterization of mechanical properties of boron–carbon-based superhard composites

Multiscale Characterization and Comparison of Historical and Modern Nuclear Graphite Grades

Processing-structure-mechanical property relationships in direct formed carbon nanotube articles and their composites: A review

Review of Applications of Polymer/Carbon Nanotubes and Epoxy/CNT Composites

Composites with carbon nanotubes and graphene: An outlook

A review of the coefficient of thermal expansion and thermal conductivity of graphite

An overview of carbon-carbon composite materials and their applications

Carbon Nanofibers and Their Composites: A Review of Synthesizing, Properties and Applications

A Perspective on High-performance CNT fibres for Structural Composites

A review on the mechanical properties of polymer composites reinforced by carbon nanotubes and graphene