Synthesis of trioctyl polyvinyl chloride ammonium, membrane extraction properties, and electrodriven mass transfer behavior of Chromium (VI)

Xiaorong Meng,Wenyu Li,Yingxin Tian,Chi Sun,Jingyang Huang,Xingfan Liu

DOI: https://doi.org/10.1016/j.seppur.2023.124191

IF: 8.6

2023-06-04

Separation and Purification Technology

Abstract:Trioctyl polyvinyl chloride ammonium (PVCT QAS ) with quaternary ammonium salt content (QAS) of 25 % was synthesized by a nucleophilic substitution reaction of between polyvinyl chloride (PVC) and trioctylamine (TOA) for the first time. The mass transfer behavior of HCrO 4 − , CdCl 3 − , CoCl 4 2− , FeCl 4 − , and CuCl 4 2− metal complex anions within the plasticized PVCT QAS membrane followed a first-order kinetic rate equation. Taking the Cr(VI)-PVCT QAS system as a representative, the influences of plasticizer content and membrane thickness on the mass transfer performance were investigated, and the electrodriven mass transfer behavior of Cr(VI) was studied. The results showed that the mass transfer of HCrO 4 − in PVCT QAS D followed a jumping mechanism, with a QAS content threshold of 22 %. In the Cr(VI)-PVCT QAS electrodriven mass transfer system, the PVCT QAS D exhibited uniform electrochemical properties, and the membrane thickness had little influence on the mass transfer rate. The response of HCrO 4 − mass transfer rate to voltage depended on the distribution density of QAS in the membrane. The mass transfer performance of PVCT QAS D with QAS between 15 % and 20 % had a high dependence on the voltage, while the permeability coefficient of Cr(VI)-PVCT QAS system became stable when the voltage exceeded 10 V after surpassing the QAS content threshold. 50 μm QAS 25 % Cr(VI)-PVCT QAS system had a treatment efficiency of 710 mg·m −2 ·h −1 for HCrO 4 − at 10 V, while maintaining exceptional selectivity and stability.

engineering, chemical