Abstract:Flow chart for the preparation of PEN‐based composite films. Thermal conductive polymer‐based composites synchronously with stable dielectric and excellent mechanical properties are urgently needed for high‐temperature‐resistant electronic devices. Here, a significant improvement in the thermal conductivity (TC), thermal stability, dielectric, and mechanical performance was simultaneously achieved in the polyarylene ether nitrile (PEN)/divinyl siloxane‐bisbenzocyclobutene (BCB) matrix through the incorporation of boron nitride nanosheets (BNNS) combined together with the post‐solid phase chemical reaction technique. The significant increase in the effective filler‐filler and filler‐crystal contacts in the composites was the main reason for the improvement in TC and dielectric constant. Besides, glass transition temperature (Tg) and mechanicals were enhanced in the presence of cross‐linked networks. By synchronously adding 15 vol% BNNS, the TC of composites after treatment reached up to 5.582 W/m.K, enhanced by 4.4 times higher than untreated. The dielectric constant was down to 2.93 at 1 MHz and the loss remained at a relatively low level. Meanwhile, the composite showed significantly enhanced thermal stability, mechanicals, and hydrophobicity (Tg = 336°C, T5% = 529°C, tensile strength and modulus was 94.5 MPa and 5.3 GPa, respectively, the contact angle was 101.76°). Thus, it promotes an effective strategy for fabricating a high‐performance‐polymer composite, which has the potential used in electronic materials. Highlights Crystallization‐crosslinking strategy optimizes overall performance. Crystals fill gaps between BNNS layers and connect thermal conductive pathway. Crosslinked networks limit molecular chain motion to reduce phonon scattering. The highest TC of the PEN/BCB/BNNS composite is up to 7.451 W/m.K. Thermal property shows significant improvement after crosslinking especially Tg.

Enhanced dielectric properties of high glass transition temperature PDCPD/BaTiO3 composites by frontal ring-opening metathesis polymerization

Enhanced dielectric properties of high glass transition temperature PDCPD/CNT composites by frontal ring-opening metathesis polymerization

Improving Dielectric Properties of BaTiO3/poly(vinylidene Fluoride) Composites by Employing Core-Shell Structured BaTiO3@Poly(methylmethacrylate) and BaTiO3@Poly(trifluoroethyl Methacrylate) Nanoparticles

Improvement in Dielectric Properties of Barium Titanate/Polypropylene Nanocomposites Via Surface Modification of Ceramic Nanoparticles

Advanced Dielectric Properties of BaTiO 3 /Polyvinylidene-Fluoride Nanocomposites with Sandwich Multi-Layer Structure

Low-frequency dielectric phenomena in BaTiO3/polymer nanocomposites

Polyarylene Ether Nitrile and Barium Titanate Nanocomposite Plasticized by Carboxylated Zinc Phthalocyanine Buffer

Enhanced Dielectric Properties and Positive Temperature Coefficient Effect in the Binary Polymer Composites with Surface Modified Carbon Black

Rational Design of Two-Step Functionalized Barium Titanate for Improving Dielectric Properties of poly(Arylene Ether Nitrile) Composites

Novel BaTiO3/PVDF Composites with Enhanced Electrical Properties Modified by Calcined BaTiO3 Ceramic Powders

Hybrid Polymer Membrane Functionalized PBO Fibers/Cyanate Esters Wave-Transparent Laminated Composites

Improved Dielectric Properties of Thermoplastic Polyurethane Elastomer Filled with Core–Shell Structured PDA@TiC Particles

Enhanced dielectric properties in polyimide nanocomposites containing barium titanate@ polydopamine core-shell nanoparticles

Enhanced dielectric performance of polydimethylsiloxane‐based ternary composites films via tailored hydrogen bonds between carbon nanotube and barium titanate as modified fillers

Fabrication and Dielectric Characterization of Advanced BaTiO3/Polyimide Nanocomposite Films with High Thermal Stability

Optimization of PBO fibers/cyanate ester wave-transparent laminated composites via incorporation of a fluoride-containing linear interfacial compatibilizer

Comparison between lead free BaTio3/PDMS and doped - PZT/PDMS composite on ferroelectric characteristics

Substantial improvement of thermal conductivity and mechanical properties of polymer composites by incorporation of boron nitride nanosheets and modulation of thermal curing reaction

Thermosetting Boron-nitride-filled polybutadiene composites with enhanced thermal conductivity and good dielectric properties

Characterization and performance of plate-like Ba0.6Sr0.4TiO3/Poly(vinylidene fluoride – trifluoroethylene -chlorotrifluoroethylene) composites with high permittivity and low loss

Achieving high dielectric permittivity, high breakdown strength and high efficiency by cross-linking of poly(vinylidene fluoride)/BaTiO3 nanocomposites