Fluorine-Free Superhydrophobic Covalent-Organic-Polymer Nanosheet Coating for Selective Dye and Emulsion Separation

Rajeshkumar Anbazhagan,Rajakumari Krishnamoorthi,Darieo Thankachan,Thi Thuy Van Dinh,Chih-Feng Wang,Jen Ming Yang,Yen-Hsiang Chang,Hsieh-Chih Tsai
DOI: https://doi.org/10.1021/acs.langmuir.1c03492
IF: 3.9
2022-04-03
Langmuir
Abstract:Covalent organic polymer nanosheets (COPNs) endowed with porous networks and large surface areas in their structures offer great advantages over other materials in addressing environmental problems. In this study, fluorine-free superhydrophobic COPNs were designed and applied to selective dye absorption. Notably, COPNs selectively adsorb dyes with a high hydrophobic index (HI) and reject low HI dyes with maximum adsorption capacities of 361 and 263 mg/g for crystal violet and methylene blue, respectively. The adsorption isotherm model showed that the COPNs follow the Langmuir adsorption isotherm model and pseudo-second-order kinetics. Next, we explored the superhydrophobicity of the COPNs by in situ fabrication with melamine sponge (COPNs–MS), which incorporates the superhydrophobicity of COPNs [water contact angle (WCA) of >150°] with the structure and flexibility of the MS skeleton. The COPNs–MS shows various oil-adsorbing properties with good adsorption capacity (from 60 to 120 g/g) and also effectively separates various surfactant-stabilized emulsions with a separation efficiency of over 99%. The as-fabricated COPNs–MS retains its superhydrophobicity in various solvents and hazardous conditions (WCA ≥ 150°) and exhibits good flame retardancy and excellent compression properties with excellent antifouling property due to the superhydrophobic COPN coating. Furthermore, COPNs–MS also demonstrates excellent recyclability because the strong COPN coating in the MS skeleton retains its hydrophobicity. Therefore, our fluorine-free superhydrophobic COPNs are not only capable of selective dye adsorption but also exhibit very good oil adsorption and surfactant-stabilized emulsion separation performance.The Supporting Information is available free of charge at https://pubs.acs.org/doi/10.1021/acs.langmuir.1c03492.XRD of analysis of COPNs, contact angle of COPNs, AFM image of COPNs, BET measurement of COPNs, UV–vis spectra of CV and MB treatment by COPNs, dye adsorption of COPNs with various concentrations and times, Langmuir and Freundlich fitting model, first- and second-order kinetics model, recycling property of COPNs, dye-adsorbed COPNs FT-IR spectra and corresponding SEM images, scheme of COPNs–MS fabrication, Raman mapping of COPNs–MS, XRD analysis of pristine MS and COPNs–MS, TGA, high impact stress analysis, combustion behavior of COPNs–MS, oil adsorption behavior of COPNs–MS, SEM images of recycled COPNs–MS, emulsion separation by COPNs–MS, and corresponding separation performances of COPNs–MS compared with other studies (PDF)Pristine MS wettability under oil (MP4)COPNs–MS wettability under oil (MP4)Selective adsorption capacity of COPNs–MS to absorb hexane (MP4)Selective adsorption capacity of COPNs–MS to absorb chloroform (MP4)This article has not yet been cited by other publications.
chemistry, multidisciplinary, physical,materials science
What problem does this paper attempt to address?