Abstract:To clarify the hydrodynamic interference characteristics of flows around multiple cylinders under the wall effect, the two-dimensional (2D) flows around the near-wall single, two tandem and parallel cylinders are simulated under different gap ratios (0.15 ≤ G/D ≤ 3.0) and spacing ratios (1.5 ≤ T/D ≤ 4.0) at a Reynolds number of Re = 6300. We also examine the wake patterns, the force coefficients, and the vortex-shedding frequency with emphases on the wall effect and effects of the two-cylinder interference. A critical wall gap of G/D = 0.6 is identified in the single-cylinder case where the wall can exert significant influences. The two near-wall tandem cylinders exhibit three wake states: stretching mode, attachment mode, and impinging mode. The force coefficients on the upstream cylinder are significantly affected by the wall for G/D ≤ 0.6. The downstream cylinder is mainly influenced by the upstream cylinder. For G/D > 0.6, the force coefficients on the two cylinders exhibit a similar variation trend. In the parallel arrangement, the two cylinders exhibit four wake states in different G/D and T/D ranges: double stretching mode, hetero-vortex scale mode, unilateral vortex mode, and free vortex mode. Moreover, the two parallel cylinders in the hetero-vortex scale or free vortex mode have two states: synchronous in-phase state and synchronous out-of-phase state. The mean drag coefficients on the two cylinders decrease, while the mean lift coefficients exhibit opposite variation trends, as the T/D grows.

What problem does this paper attempt to address?

The problem that this paper attempts to solve is the flow characteristics around multiple cylinders (especially two cylinders) and their mutual interference effects under near - wall conditions. Specifically, the research focuses on the wake structure and hydrodynamic characteristics of the two - dimensional flow field around a single cylinder, two cylinders arranged in tandem, and two cylinders arranged in parallel under different gap ratios ($0.15 \leq G/D \leq 3.0$) and spacing ratios ($1.5 \leq T/D \leq 4.0$). The main purposes of the research are: 1. **Analyze the influence of wall effects on the flow around a single cylinder**: By simulating the flow around a single near - wall cylinder under different gap ratios, the significant influence of the wall on the flow characteristics is explored, and a critical wall - gap ratio ($G/D = 0.6$) is identified. Below this value, the wall can have a significant impact on the flow. 2. **Study the wake state of two near - wall cylinders arranged in tandem**: Three main wake states are explored: the stretching mode, the attached mode, and the impinging mode, and how the force coefficient on the upstream cylinder is affected by the wall and how the downstream cylinder is mainly affected by the upstream cylinder are analyzed. 3. **Analyze the wake state of two near - wall cylinders arranged in parallel**: Four different wake states are identified: the double - stretching mode, the different - vortex - scale mode, the single - side - vortex mode, and the free - vortex mode, and two states of two parallel cylinders in the different - vortex - scale mode or the free - vortex mode are further discussed: the synchronous in - phase state and the synchronous out - of - phase state. 4. **Evaluate the influence of different spacing ratios on the average drag coefficient and lift coefficient of parallel - arranged cylinders**: As the spacing ratio ($T/D$) increases, the average drag coefficient on the two cylinders decreases, while the average lift coefficient shows the opposite trend. Through these studies, the author hopes to provide a new understanding of the near - wall multi - cylinder flow phenomenon and provide theoretical support for effectively controlling the flow to reduce structural fatigue in practical engineering.

Wake Structures and Hydrodynamic Characteristics of Flows around Two Near-Wall Cylinders in Tandem and Parallel Arrangements

Experimental Investigation On Flow Around A Cylinder Group In Free Surface Cross Flow

Three-Dimensional Flow Around Two Tandem Circular Cylinders with Various Spacing at Re=220

Numerical Predictions of Flows Past Two Tandem Cylinders of Different Diameters under Unconfined and Confined Flows

Vortex structures and behavior of a flow past two rotating circular cylinders arranged side-by-side

Numerical Investigation on Two Degree-of-freedom Flow-Induced Vibration of Three Tandem Cylinders

Numerical Study on Flow Around Four Square-Arranged Cylinders at Low Reynolds Numbers

Three-Dimensional Flow Around Two Circular Cylinders in Tandem Arrangement

Three-dimensional Numerical Simulation on Flow Past Three Circular Cylinders in an Equilateral-Triangular Arrangement

WALL EFFECTS ON FLOWS PAST TWO TANDEM CYLINDERS OF DIFFERENT DIAMETERS

FUNDAMENTAL AREAS OF PHENOMENOLOGY (INCLUDING APPLICATIONS): Vortex Structures and Behavior of a Flow Past Two Rotating Circular Cylinders Arranged Side-by-Side

Poiseuille Flow-Induced Vibrations of Two Cylinders in Tandem

Free-surface effects on the flow around two circular cylinders in tandem

Wake Structures of Two Spheres in Tandem Arrangement at Various Gaps for Re = 300

Numerical Investigation of an Internal Solitary Wave Interaction with Tandem Horizontal Cylinders

Spacing Ratio Effects on the Evolution of the Flow Structure of Two Tandem Circular Cylinders in Proximity to a Wall

Experimental Investigation on Flow Past Nine Cylinders in a Square Configuration

A numerical study on dynamic flows past three tandem inclined elliptic cylinders near moving wall

Near-moving-wall flows past three tandem elliptical cylinders at low Reynolds number of 150

Flow Effect Around Two Square Cylinders Arranged Side By Side Using Lattice Boltzmann Method

Wake Flow Behaviour Behind A Smaller Cylinder Oscillating in the Wake of an Upstream Stationary Cylinder