Abstract:Lithium Ion batteries (LIB) demand has shown an exciting increase lately, particularly looking for light-weight solution for portable devices [1], [2]. Recently, The development and implementation of electrode material production techniques pushed the LIB's current state performance to further improvement. Silicon (Si) anode-based electrodes are considered an attractvie alternative to conventional graphite electrodes due to their high specific capacity [3]. Theoretically, Si could alloy with Li up to Li 4.4 Si and result in a specific capacity of 4200 mAh/g, where the mechanical stress within the electrode material causes loss in the conductivity and breaking of the cell. To overcome this issue, different methodologies have been tested for further improvement of Si implementation with different nanostructures [4]. On the other hand, the production rate of LIB is very important to meet the high demand for different technologies. and, a commercial Si grade is highly recommended along with the conventional tape-casting production method. Furthermore, water-based binders, such as Polyacrylic Acid and Carboxy methyl Cellulose (cellulose-based binders) plays an important role in electrode preparation, where it is supporting the volume expansion of Si and preserveing electrode morphology [5]. Herein, we focus on producing a high-quality Si electrode with cellulose binder, enhanced by conductive carbon allotrope additives. In this study, different Si grades will be tested with different concentrations along with conductive and binder [6]. Electrochemical characterization of the Si anode half cell , such as cycling, cyclic voltammetry, and Impedance spectroscopy vs Li + metal shows extended and stabilized cycling performance, inferring a reduced anode pulverization. References [1] M. Wakihara, ‘Recent developments in lithium ion batteries’, Mater. Sci. Eng. R Rep. , vol. 33, no. 4, pp. 109–134, Jun. 2001, doi: 10.1016/S0927-796X(01)00030-4. [2] B. Scrosati, ‘Recent advances in lithium ion battery materials’, Electrochimica Acta , vol. 45, no. 15, pp. 2461–2466, May 2000, doi: 10.1016/S0013-4686(00)00333-9. [3] S. Chae, M. Ko, K. Kim, K. Ahn, and J. Cho, ‘Confronting Issues of the Practical Implementation of Si Anode in High-Energy Lithium-Ion Batteries’, Joule , vol. 1, no. 1, pp. 47–60, Sep. 2017, doi: 10.1016/j.joule.2017.07.006. [4] J. Cho, ‘Porous Si anode materials for lithium rechargeable batteries’, J. Mater. Chem. , vol. 20, no. 20, pp. 4009–4014, May 2010, doi: 10.1039/B923002E. [5] P. Parikh et al. , ‘Role of Polyacrylic Acid (PAA) Binder on the Solid Electrolyte Interphase in Silicon Anodes’, Chem. Mater. , vol. 31, no. 7, pp. 2535–2544, Apr. 2019, doi: 10.1021/acs.chemmater.8b05020. [6] A. Meyer, F. Ball, and W. Pfleging, ‘The Effect of Silicon Grade and Electrode Architecture on the Performance of Advanced Anodes for Next Generation Lithium-Ion Cells’, Nanomaterials , vol. 11, no. 12, Art. no. 12, Dec. 2021, doi: 10.3390/nano11123448.

Tailoring Silicon Composite Anodes with Li+-Doped Organic Ionic Plastic Crystals for Solid-State Batteries

Advanced Inorganic Lithium Metasilicate Binder for High-Performance Silicon Anode.

Improving the Performance of the SiO/C Anode by Employing theTriblock Copolymer Binder and Copper Nanowires

Manipulating charge-transfer kinetics and flow-domain LiF-rich interphase to enable high-performance microsized silicon-silver-carbon composite anode for solid-state batteries

Tailoring Stress and Ion-Transport Kinetics Via a Molecular Layer Deposition-Induced Artificial Solid Electrolyte Interphase for Durable Silicon Composite Anodes

Constructing a Robust Solid-Electrolyte Interphase Layer via Chemical Prelithiation for High-Performance SiO<i><sub>x</sub></i> Anode

A Uniform Self‐Reinforced Organic/Inorganic Hybrid SEI Chelation Strategy on Microscale Silicon Surfaces for Stable‐Cycling Anodes in Lithium‐Ion Batteries

Solid-State Silicon Anode with Extremely High Initial Coulombic Efficiency

Electrochemical performance of a high-performance SiO composite anode material for Li-ion battery enhanced by piezoelectric effect

Robust and Fast‐Ion Conducting Interphase Empowering SiO x Anode Toward High Energy Lithium–Ion Batteries

Mixed Electronic-Ionic Conductive Polymer Binder for Silicon-Based Solid-State Battery

A Hybrid Structure to Improve Electrochemical Performance of SiO Anode Materials in Lithium-Ion Battery

Monothetic and conductive network and mechanical stress releasing layer on micron-silicon anode enabling high-energy solid-state battery

Slidable and Highly Ionic Conductive Polymer Binder for High‐Performance Si Anodes in Lithium‐Ion Batteries

Enabling robust structural and interfacial stability of micron-Si anode toward high-performance liquid and solid-state lithium-ion batteries

Enhancing Charging Efficiency with Lithium Silicate in Silicon Composite Anode Materials Through Lithiothermic Reduction Reaction Synthesis

Understanding Electrochemical Properties for a Bio-Based Silicon Anode Electrode Enhanced with Carbon Nanostructure Conductive Additives and Water-Based Binders

Enhanced Silicon Anodes with Robust SEI Formation Enabled by Functional Conductive Binder

In Situ Constructing of Rigid‐Soft Coupling Solid–Electrolyte Interphase on Silicon Electrode toward High‐Performance Lithium Ion Batteries

Tailoring of a reinforcing and artificial self-assembled alkyl sulfonic acid layer electrolyte interphase on silicon as an anode for high-energy-density lithium-ion batteries

Constructing a Robust Solid–Electrolyte Interphase Layer Via Chemical Prelithiation for High‐Performance SiOx Anode