Abstract:Magnetorheological (MR) fluids are field-responsive material with the ability to change its rheological behavior by having an external magnetic field. Therefore, they are commonly used in vibration damping, clutches, actuators and haptic devices. Generally, MR devices are fabricated utilizing the operational mechanism of a single working mode which is either flow, shear or squeeze. However, for this study a special MR damper was designed and fabricated to carry out a dynamic loading test and analyze the effect on a hydrocarbon-based MR fluid in a combination of shear and squeeze working modes. The damping force generated by shear mode is measured based on the force-displacements relationship of applied current and piston stroke length. The cushion effect generated by the squeeze mode is evaluated by the magnitude of the damping force at various piston stroke lengths. The MR damper could produce a damping force ranging from 50 to 270 N with zero input of current, up to 0.8 A without any saturation occurring from 15 to 25 mm of the piston stroke length. However, when the piston was closing to the bottom of the cylinder from 25 to 26 mm, a high peak force was observed confirming the existence of the squeeze mode. The cushion effect started as soon as the current was applied showing a high magnitude of 722 N at only 0.2 A. As the applied current increased further to 0.8 A, a very high squeeze force up to 1030N was produced when the piston nearly reached the cylindrical end. This proves that the cushion effect induced by the squeeze mode helps strengthen the damping force and consequently brings a positive impact towards a mixed mode damper when the piston is nearly closing the gap at the bottom of the cylinder. In conclusion, a high yield stress MR damper at a small gap clearance was successfully produced and this uniqueness can be utilized as a replacement of the conventional rubber stopper in dampers.

Prototyping design and experimental validation of membranous dual-cavity based amplitude selective damper

Modeling and experimental evaluation of vibration reduction of hydraulic-driven joint with a MRF damper

Dynamic Characteristics and Modeling of A New Magnetorheological Damper for Broadband Vibration Control

Research On Dynamic Characteristics Of A Magnetorheological Damper With Decoupling Mechanism

Integrated Dynamic Characteristics and Application in Semi-Active Dynamic Absorber of Magneto-Rheological Fluids

Performance analysis of the damper with built-in magnetorheological valve

Design, Modeling, and Vibration Control of a Damper Based on Magnetorheological Fluid and Elastomer

Design and experimental analysis of magneto-rheological damper featuring a labyrinthic dual-channel valve

Methodology on a novel magnetorheological valve controlled damper synthesis design

Development of a Semi-Active Suspension Using a Compact Magnetorheological Damper with Negative-Stiffness Components

Development and characterization of a magnetorheological damper with low-velocity sensitivity

Design and experimental evaluation of a novel flow-mode magnetorheological damper without accumulator

Electro-hydraulic Damper for Energy Harvesting Suspension: Modeling, Prototyping and Experimental Validation

A New Generation of Magnetorheological Vehicle Suspension System With Tunable Stiffness and Damping Characteristics

Design and investigation of a new mixed-mode magnetorheological damper

Semi-Active Suspension Control Based on Bingham Modified Model Using Prototyped Twin-Tube

Damping characteristics of a magneto-rheological damper with dual independent controllable ducts

Mechanical performance of a novel magnetorheological fluid damper based on squeeze-valve bi-mode of MRF

Experimental and Theoretical Investigations on an Asynchronized Parallel Double‐Stage Viscous Fluid Damper

Mechanical model and structural control performance of a new rotation-magnified viscoelastic damper

Research on the Damping Device with Adjustable Inertia and Damping