Abstract:An integration hydrogen adsorption benign component such as a metal with an oxygen-containing reactant adsorption benign component such as metal oxide allows for efficient overall water splitting in alkaline solutions and yet remains a considerable challenge. Herein, 5d transition metal oxide WO2 and WO3 (denoted as WOx) nanoparticles are purposely integrated with a porous Ni nanosheet array grown on nickel foam (NF) to design a strongly coupled Ni/WOx/NF porous nanosheet array electrocatalyst. Through the anion exchange of Ni(OH)2 nanosheets with tungstate, followed by hydrogenation treatment, abundant Ni/WOx interfaces with strong coupling interaction are generated. Benefiting from the strong synergies between Ni and WOx and the unique nanostructure, Ni/WOx/NF only requires the overpotentials of 42 mV for hydrogen evolution reaction (HER) and 395.7 mV for oxygen evolution reaction (OER) to achieve the current densities of 10 and 100 mA cm–2, respectively. Furthermore, the Ni/WOx/NF can achieve a current density of 10 mA cm–2 at a low cell voltage of 1.54 V in a two-electrode system. This work opens a novel avenue for the design of high-performance but low-cost electrocatalysts for overall water splitting.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acs.inorgchem.1c00841?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acs.inorgchem.1c00841</a>.XRD patterns of the Ni(OH)2/NF; SEM images of Ni(OH)2/NF; XRD patterns of the NiW/NF-pre; SEM images of NiW/NF-pre; N2 adsorption/desorption isotherms and pore-size distribution of 500-Ni/WOx/NF; SEM images of 500-Ni/NF; SEM images of 500-WOx/NF; XRD patterns of 500-Ni/WOx/NF-m (m = 1, 2, and 4); SEM images of 500-Ni/WOx/NF-m (m = 1, 2, and 4); XRD patterns of T-Ni/WOx/NF-3 (T = 300, 400, and 600 °C); SEM images of T-Ni/WOx/NF-3 (T = 300, 400, and 600 °C); polarization curves of T-Ni/WOx/NF-3 (T = 300, 400, 500, and 600 °C); HER performances of 500-WOx/CC, 500-Ni/CC, and 500-Ni/WOx/CC; CV curves of 500-Ni/WOx/NF-m (m = 1, 2, 3, and 4), 500-Ni/NF, and 500-WOx/NF; calculation formula of TOF; CVs of sample 500-Ni/WOx/NF-3, 500-WOx/NF, and 500-Ni/NF in 0.2 M phosphate buffer (pH = 7) at a scan rate of 50 mV s–1; SEM images of 500-Ni/WOx/NF-3 after the HER stability test of 50 h; EDX spectra of 500-Ni/WOx/NF-3 before and after the HER stability test; high-resolution XPS spectra of Ni 2p, W 4f, and O 1s of 500-Ni/WOx/NF-3 after the HER stability test; polarization curves of T-Ni/WOx/NF-3 (T = 300, 400, 500, and 600 °C); OER performances of 500-WOx/CC, 500-Ni/CC, and 500-Ni/WOx/CC; CV curves of 500-Ni/WOx/NF-m (m = 1, 2, 3, and 4), 500-WOx/NF, and 500-Ni/NF; SEM images of 500-Ni/WOx/NF-3 after the OER stability test of 50 h; high-resolution XPS spectra of Ni 2p, W 4f, and O 1s of 500-Ni/WOx/NF-3 after the OER stability test; and comparisons of the HER and OER performances of recently reported catalysts (<a class="ext-link" href="/doi/suppl/10.1021/acs.inorgchem.1c00841/suppl_file/ic1c00841_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

Dual Active Center-Assembled Cu 31 S 16 –Co 9- x Ni x S 8 Heterodimers: Coherent Interface Engineering Induces Multihole Accumulation for Light-Enhanced Electrocatalytic Oxygen Evolution

Generic Heterostructure Interfaces Bound to Co9S8 for Efficient Overall Water Splitting Supported by Photothermal.

Surface Tuning to Promote the Electrocatalysis for Oxygen Evolution Reaction: From Metal-Free to Cobalt-Based Carbon Electrocatalysts

Improved Interface Charge Transfer and Redistribution in CuO‐CoOOH p‐n Heterojunction Nanoarray Electrocatalyst for Enhanced Oxygen Evolution Reaction

Evoking Cooperative Geometric and Electronic Interactions at Nanometer Coherent Interfaces Toward Enhanced Electrocatalysis

Engineering Co/Co2P Mott-Schottky heterostructure encased in hollow N-doped carbon polyhedron as an advanced nanoreactor towards high-efficiency electrocatalytic oxygen evolution

Integrating Amorphous Molybdenum Sulfide Nanosheets with a Co 9 S 8 @Ni 3 S 2 Array as an Efficient Electrocatalyst for Overall Water Splitting

Interface Engineering of Hollow CoO/Co 4 S 3 @CoO/Co 4 S 3 Heterojunction for Highly Stable and Efficient Electrocatalytic Overall Water Splitting

Hybrid OER Electrocatalyst Combining Mesoporous Hollow Spheres of N, P-Doped Carbon with Ultrafine Co 2 NiO x

High-Valent Nickel Promoted by Atomically Embedded Copper for Efficient Water Oxidation

Tuning the Electronic Structures of Multimetal Oxide Nanoplates to Realize Favorable Adsorption Energies of Oxygenated Intermediates

Engineering cobalt sulfide/oxide heterostructure with atomically mixed interfaces for synergistic electrocatalytic water splitting

Interfaces modulation strategy to synthesize bifunctional electrocatalyst for highly efficient overall water splitting

A dual-active Co-CoO heterojunction coupled with Ti3C2-MXene for highly-performance overall water splitting

Synergistically Integrating Nickel Porous Nanosheets with 5d Transition Metal Oxides Enabling Efficient Electrocatalytic Overall Water Splitting

Promoted Interfacial Charge Transport and Separation of Size-Uniform Zn, Ni-Doped CdS-1T/2H O-MoS 2 Nanoassemblies for Efficient Visible-Light Photocatalytic Water Splitting

Interfacial engineering of transition-metal sulfides heterostructures with built-in electric-field effects for enhanced oxygen evolution reaction

Constructing Dense CoRu-CoMoO4 Heterointerfaces with Electron Redistribution for Synergistically Boosted Alkaline Electrocatalytic Water Splitting

A Nanosized CoNi Hydroxide@Hydroxysulfide Core-Shell Heterostructure for Enhanced Oxygen Evolution.

Amorphous–Amorphous Coupling Enhancing the Oxygen Evolution Reaction Activity and Stability of the NiFe-Based Catalyst

In Situ-Generated Hollow CoFe-LDH/Co-MOF Heterostructure Nanorod Arrays for Oxygen Evolution Reaction