Abstract:Oxidative cracking of polyolefins into functionalized molecules or oligomers promises the chemical upcycling of plastic wastes. In this work, we develop a novel approach to polyolefin waste upcycling that utilizes low-temperature oxidative cracking combined with dynamic cross-linking to produce recyclable elastomers. High-density polyethylene is oxidized into functionalized oligomers with end carboxyl groups at 110 degrees C, achieving tunable number-average molecular weights (M n) ranging from 1500 to 5500 Da at distributions (D) between 2.91 and 3.33. These oligomers with high crystallinity directly react with amorphous cis-polybutadiene containing pendant epoxy groups (an oxidized product of cis-polybutadiene) through esterification, forming a dynamically cross-linked elastomer. The elastomer displays a low glass transition temperature (T g) of approximately -100 degrees C while maintaining a melting point (T m) above 80 degrees C; it showcases a Young ' s modulus (E) of 12.0 +/- 0.4 MPa, elongation at break (epsilon) of 600 +/- 28%, tensile strength (sigma) of 16.4 +/- 0.8 MPa, tensile toughness (U T) of 46.0 +/- 3.5 MJ center dot m-3, and a good elasticity with 81.8% elastic recovery in a 10-cycle tensile test, even higher than that of commercial POEs such as POE-8150 of Dow Company. The dynamic ester-bond-based cross-linking enables the elastomer to be reprocessed. Our study introduces an efficient chemical upcycling process for polyolefin wastes, eliminating the need for tedious separation steps of cracking products.

Selective poly(vinyl ether) upcycling via photooxidative degradation with visible light

Oxidative Upcycling of Polyolefin Wastes into the Dynamically Cross-Linked Elastomer

Polyethersulfones upcycling to luminescent materials by aminolysis

Reaction of β-Ketoester and 1,3-Diol to Access Chemically Recyclable and Mechanically Robust Poly(vinyl alcohol) Thermosets through Incorporation of β-(1,3-dioxane)ester

Polyester Platform with High Refractive Indices and Closed-Loop Recyclability from CO2, 1,3-Butadiene, and Thiols

Visualized Degradation of CO 2 -Based Unsaturated Polyesters Toward Structure-Controlled and High-Value-Added Fluorophores

Phenol-Yne Click Polymerization: an Efficient Technique to Facilely Access Regio- and Stereoregular Poly(Vinylene Ether Ketone)S

A General Approach for Photo-Oxidative Degradation of Various Polymers

Photocatalytic Upcycling and Depolymerization of Vinyl Polymers

Degradation of vinyl ester resin and its composites via cleavage of ester bonds to recycle valuable chemicals and produce polyurethane

Affinity of K+ to Organic Matter Promotes Reactions: Degradation of Super Stable Phenolic Epoxy Vinyl Ester Resin to Value-added Chemicals

Visible‐Light‐Enabled Organocatalyzed Controlled Alternating Terpolymerization of Perfluorinated Vinyl Ethers

4-Hydroxyproline-derived Sustainable Polythioesters: Controlled Ring-Opening Polymerization, Complete Recyclability, and Facile Functionalization

Visible Light Degradable Acridine-Containing Polyurethanes in an Aqueous Environment

Complete Degradation of a Conjugated Polymer into Green Upcycling Products by Sunlight in Air

Photochemical upcycling of polymers via visible light-driven C–H bond activation

Homo- and Hetero-Recyclable Polyesters with High Refractive Index from CO2, 1,3-Butadiene and Thiols

A facile, alternative and sustainable feedstock for transparent polyurethane elastomers from chemical recycling waste PET in high-efficient way

Polyester Networks from Structurally Similar Monomers: Recyclable-by-design and Upcyclable to Photopolymers

Selective Electrochemical Modification and Degradation of Polymers

Efficient degradation of polyethylene (PE) plastics by a novel vacuum ultraviolet-activated periodate system: Operating parameters, by-products, and toxicity