Power capture and power take-off load of a self-balanced dual-flap oscillating surge wave energy converter

Alaa Ahmed,Jia Mi,Jianuo Huang,Raju Datla,Kevin Connington,Lei Zuo,Muhammad R. Hajj

DOI: https://doi.org/10.1016/j.energy.2024.130431

IF: 9

2024-01-29

Energy

Abstract:Wave energy converters are an important part of future renewable energy infrastructure. Predicting their power matrix, capture width ratio, and power take-off loads at a targeted site is required for performance assessment before deployment. Because their testing is very expensive, numerical modeling and simulations play a significant role in those assessments. Linear potential flow theory has limited accuracy under large amplitude wave forcing. More accurate predictions can be obtained by using higher-fidelity models, which are computationally expensive. We present a framework for multi-fidelity numerical simulations to determine the hydrodynamic response, wave capture capability, and power take-off load of a full-scale dual-flap oscillating surge wave energy converter. This design exploits out-of-phase motion by setting the distance between the flaps to half the wavelength of the most occurring wave. The simulations are validated using a 1:10 model experiments in a wave tank. Based on these validations, it was determined that Euler simulations provide an acceptable prediction with 90% reduction in computational time with only 11% error. Utilizing Euler simulations at full-scale, the results demonstrate that the annual electrical energy output is 1.79 GWh under regular wave conditions. One significant improvement over single-flap designs is the capture width ratio which exceeds unity.

energy & fuels,thermodynamics