Abstract:Decisions made at the early design stage have tremendous impacts on building performance (energy consumption, daylight, life cycle cost, natural ventilation, sunshine hours, etc.). Owing to progress in the design process, the opportunity to improve building performance is constantly reducing, while the cost of optimization is constantly increasing. The literature review shows that the commonly used building performance optimization workflow is divided into two categories: the forward optimization workflow and the inverse optimization workflow. In the forward workflow, designers are allowed to optimize building schemes according to feedback gleaned from the performance metrics; in the inverse workflow, however, designers are allowed to utilize software to search for optimal design solutions. Both workflows have their advantages, and their collective advantages can result in a highly efficient building design; however, in practice, the two processes are often separated. Furthermore, the simulation engines used in these two workflows are simulation software quite widely used. Using these software often requires a large amount of information, which are not suitable for an early design. In this paper, a bidirectional workflow for building performance optimization at the early design stage is proposed. The building energy consumption prediction model is then improved to make the workflow provide real-time performance feedback, and the optimization workflow is realized in SketchUp. This approach can provide quick feedback from building performance metrics, and allows designers to search for optimal solutions, using a genetic algorithm to support early design decisions. Because of the different structures of the simplified model and the standard model in BESTEST, we chose to use the results of DesignBuilder as the baseline to calibrate the simplified model. The model verification results show that the relative deviation of the total energy consumption of working condition 1 and 2 is between 20% and 27% due to the relatively large heating deviation in Beijing. The relative deviation of the total energy consumption of other cities is within 10%. In future work, we plan to rebuild the codes of the simplified model, and perform energy calibration under the standard procedure in BESTEST. Finally, the workflow is illustrated through a case study. Compared to previous studies, through the inverse-forward workflow and the simplified energy prediction model, the proposed workflow is demonstrated to better provide fast performance optimization at the early design stage.

Retraining surrogate models in increasingly restricted design spaces: a novel building energy model calibration method

A meta-model-based optimization approach for fast and reliable calibration of building energy models

Supporting Decision Making for Building Decarbonization: Developing Surrogate Models for Multi-Criteria Building Retrofitting Analysis

Comparison of ANN and XGBoost surrogate models trained on small numbers of building energy simulations

Calibration of building energy computer models via bias-corrected iteratively reweighted least squares method

Using Bayesian deep learning approaches for uncertainty-aware building energy surrogate models

End-to-end deep meta modelling to calibrate and optimize energy consumption and comfort

Surrogate modelling for urban building energy simulation based on the bidirectional long short-term memory model

Energy model calibration in an office building by an optimization-based method

Surrogate-Based Inverse Modeling of the Hydrological System: An Adaptive Approach Considering Surrogate Structural Error.

Fast Bidirectional Building Performance Optimization at the Early Design Stage

A Novel Global Model Calibration Scheme for Complex Process Systems Using an Adaptive Experimental Design

Using calibrated minimum input models to predict retrofit performance on residential dwellings

Building energy optimization using surrogate model and active sampling

Application and evaluation of a pattern-based building energy model calibration method using public building datasets

Sensitivity Assessment of Building Energy Performance Simulations Using MARS Meta-Modeling in Combination with Sobol' Method

A Lightweight Calibrated Simulation Enabling Efficient Offline Learning for Optimal Control of Real Buildings

Multi-Objective Optimization of Building Envelope Retrofits Considering Future Climate Scenarios: An Integrated Approach Using Machine Learning and Climate Models

The Enhanced Parameter Estimation (EPE) -- A New Calibration Methodology for Building Energy Simulations

A hybrid-model approach for reducing the performance gap in building energy forecasting

Comparing hyperparameter tuning methods in machine learning based urban building energy modeling: A study in Chicago